Commit 89eda1fa authored by Walt Feasel's avatar Walt Feasel Committed by Greg Kroah-Hartman

staging: emxx_udc: emxx_udc.c Logical continuation

Make suggested checkpatch modification for
CHECK: Logical continuations should be on the
previous line
Signed-off-by: default avatarWalt Feasel <waltfeasel@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a0edbc94
......@@ -926,8 +926,8 @@ static int _nbu2ss_epn_out_pio(
req->req.actual += result;
if ((req->req.actual == req->req.length)
|| ((req->req.actual % ep->ep.maxpacket) != 0)) {
if ((req->req.actual == req->req.length) ||
((req->req.actual % ep->ep.maxpacket) != 0)) {
result = 0;
}
......@@ -953,9 +953,8 @@ static int _nbu2ss_epn_out_data(
iBufSize = min((req->req.length - req->req.actual), data_size);
if ((ep->ep_type != USB_ENDPOINT_XFER_INT)
&& (req->req.dma != 0)
&& (iBufSize >= sizeof(u32))) {
if ((ep->ep_type != USB_ENDPOINT_XFER_INT) && (req->req.dma != 0) &&
(iBufSize >= sizeof(u32))) {
nret = _nbu2ss_out_dma(udc, req, num, iBufSize);
} else {
iBufSize = min_t(u32, iBufSize, ep->ep.maxpacket);
......@@ -996,8 +995,8 @@ static int _nbu2ss_epn_out_transfer(
}
}
} else {
if ((req->req.actual == req->req.length)
|| ((req->req.actual % ep->ep.maxpacket) != 0)) {
if ((req->req.actual == req->req.length) ||
((req->req.actual % ep->ep.maxpacket) != 0)) {
result = 0;
}
}
......@@ -1166,9 +1165,8 @@ static int _nbu2ss_epn_in_data(
num = ep->epnum - 1;
if ((ep->ep_type != USB_ENDPOINT_XFER_INT)
&& (req->req.dma != 0)
&& (data_size >= sizeof(u32))) {
if ((ep->ep_type != USB_ENDPOINT_XFER_INT) && (req->req.dma != 0) &&
(data_size >= sizeof(u32))) {
nret = _nbu2ss_in_dma(udc, ep, req, num, data_size);
} else {
data_size = min_t(u32, data_size, ep->ep.maxpacket);
......@@ -1577,8 +1575,7 @@ static int std_req_get_status(struct nbu2ss_udc *udc)
u8 ep_adrs;
int result = -EINVAL;
if ((udc->ctrl.wValue != 0x0000)
|| (direction != USB_DIR_IN)) {
if ((udc->ctrl.wValue != 0x0000) || (direction != USB_DIR_IN)) {
return result;
}
......@@ -1891,9 +1888,8 @@ static inline void _nbu2ss_ep0_int(struct nbu2ss_udc *udc)
break;
case EP0_OUT_STATUS_PAHSE:
if ((status & STG_END_INT)
|| (status & SETUP_INT)
|| (status & EP0_OUT_NULL_INT)) {
if ((status & STG_END_INT) || (status & SETUP_INT) ||
(status & EP0_OUT_NULL_INT)) {
status &= ~(STG_END_INT
| EP0_OUT_INT
| EP0_OUT_NULL_INT);
......@@ -2537,8 +2533,8 @@ static int nbu2ss_ep_enable(
}
ep_type = usb_endpoint_type(desc);
if ((ep_type == USB_ENDPOINT_XFER_CONTROL)
|| (ep_type == USB_ENDPOINT_XFER_ISOC)) {
if ((ep_type == USB_ENDPOINT_XFER_CONTROL) ||
(ep_type == USB_ENDPOINT_XFER_ISOC)) {
pr_err(" *** %s, bat bmAttributes\n", __func__);
return -EINVAL;
}
......@@ -2547,8 +2543,7 @@ static int nbu2ss_ep_enable(
if (udc->vbus_active == 0)
return -ESHUTDOWN;
if ((!udc->driver)
|| (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
dev_err(ep->udc->dev, " *** %s, udc !!\n", __func__);
return -ESHUTDOWN;
}
......@@ -2663,9 +2658,7 @@ static int nbu2ss_ep_queue(
}
req = container_of(_req, struct nbu2ss_req, req);
if (unlikely
(!_req->complete || !_req->buf
|| !list_empty(&req->queue))) {
if (unlikely(!_req->complete || !_req->buf || !list_empty(&req->queue))) {
if (!_req->complete)
pr_err("udc: %s --- !_req->complete\n", __func__);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment