Commit 8a29c778 authored by Lucas De Marchi's avatar Lucas De Marchi Committed by Ville Syrjälä

drm/i915: remove check for aux irq

This became dead code with commit 309bd8ed ("drm/i915: Reinstate
GMBUS and AUX interrupts on gen4/g4x").

v2: Move comment about HW behavior to where decision is made to enable
MSI (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523180435.18042-1-lucas.demarchi@intel.com
parent d20ac620
......@@ -1165,6 +1165,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
* get lost on g4x as well, and interrupt delivery seems to stay
* properly dead afterwards. So we'll just disable them for all
* pre-gen5 chipsets.
*
* dp aux and gmbus irq on gen4 seems to be able to generate legacy
* interrupts even when in MSI mode. This results in spurious
* interrupt warnings if the legacy irq no. is shared with another
* device. The kernel then disables that interrupt source and so
* prevents the other device from working properly.
*/
if (INTEL_GEN(dev_priv) >= 5) {
if (pci_enable_msi(pdev) < 0)
......
......@@ -2581,16 +2581,6 @@ intel_info(const struct drm_i915_private *dev_priv)
(IS_CANNONLAKE(dev_priv) || \
IS_SKL_GT3(dev_priv) || IS_SKL_GT4(dev_priv))
/*
* dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts
* even when in MSI mode. This results in spurious interrupt warnings if the
* legacy irq no. is shared with another device. The kernel then disables that
* interrupt source and so prevents the other device from working properly.
*
* Since we don't enable MSI anymore on gen4, we can always use GMBUS/AUX
* interrupts.
*/
#define HAS_AUX_IRQ(dev_priv) true
#define HAS_GMBUS_IRQ(dev_priv) (INTEL_GEN(dev_priv) >= 4)
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
......
......@@ -953,7 +953,7 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
}
static uint32_t
intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
intel_dp_aux_wait_done(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp));
i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp);
......@@ -961,14 +961,10 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
bool done;
#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
if (has_aux_irq)
done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
msecs_to_jiffies_timeout(10));
else
done = wait_for(C, 10) == 0;
done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
msecs_to_jiffies_timeout(10));
if (!done)
DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
has_aux_irq);
DRM_ERROR("dp aux hw did not signal timeout!\n");
#undef C
return status;
......@@ -1033,7 +1029,6 @@ static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
}
static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
bool has_aux_irq,
int send_bytes,
uint32_t aux_clock_divider)
{
......@@ -1054,7 +1049,7 @@ static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
return DP_AUX_CH_CTL_SEND_BUSY |
DP_AUX_CH_CTL_DONE |
(has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_INTERRUPT |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
timeout |
DP_AUX_CH_CTL_RECEIVE_ERROR |
......@@ -1064,13 +1059,12 @@ static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
}
static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
bool has_aux_irq,
int send_bytes,
uint32_t unused)
{
return DP_AUX_CH_CTL_SEND_BUSY |
DP_AUX_CH_CTL_DONE |
(has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_INTERRUPT |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_TIME_OUT_MAX |
DP_AUX_CH_CTL_RECEIVE_ERROR |
......@@ -1093,7 +1087,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
int i, ret, recv_bytes;
uint32_t status;
int try, clock = 0;
bool has_aux_irq = HAS_AUX_IRQ(dev_priv);
bool vdd;
ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp);
......@@ -1148,7 +1141,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
has_aux_irq,
send_bytes,
aux_clock_divider);
......@@ -1165,7 +1157,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
/* Send the command and wait for it to complete */
I915_WRITE(ch_ctl, send_ctl);
status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
status = intel_dp_aux_wait_done(intel_dp);
/* Clear done status and any errors */
I915_WRITE(ch_ctl,
......
......@@ -1132,7 +1132,6 @@ struct intel_dp {
* register with to kick off an AUX transaction.
*/
uint32_t (*get_aux_send_ctl)(struct intel_dp *dp,
bool has_aux_irq,
int send_bytes,
uint32_t aux_clock_divider);
......
......@@ -336,7 +336,7 @@ static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
/* Start with bits set for DDI_AUX_CTL register */
aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, 0, sizeof(aux_msg),
aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, sizeof(aux_msg),
aux_clock_divider);
/* Select only valid bits for SRD_AUX_CTL */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment