crypto: ux500 - Add driver for HASH hardware

This adds a driver for the ST-Ericsson ux500 hash hardware
module. The driver implements support for SHA-1 and SHA-2.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Westin <andreas.westin@stericsson.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

arch/arm/mach-ux500/include/mach/crypto-ux500.h

@@ -8,6 +8,11 @@
 #include <linux/dmaengine.h>
 #include <plat/ste_dma40.h>
 
+struct hash_platform_data {
+	void *mem_to_engine;
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
 struct cryp_platform_data {
 	struct stedma40_chan_cfg mem_to_engine;
 	struct stedma40_chan_cfg engine_to_mem;

drivers/crypto/ux500/Kconfig

@@ -12,6 +12,15 @@ config CRYPTO_DEV_UX500_CRYP
         This selects the crypto driver for the UX500_CRYP hardware. It supports
         AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes.
 
+config CRYPTO_DEV_UX500_HASH
+        tristate "UX500 crypto driver for HASH block"
+        depends on CRYPTO_DEV_UX500
+        select CRYPTO_HASH
+        select CRYPTO_HMAC
+        help
+          This selects the hash driver for the UX500_HASH hardware.
+          Depends on UX500/STM DMA if running in DMA mode.
+
 config CRYPTO_DEV_UX500_DEBUG
 	bool "Activate ux500 platform debug-mode for crypto and hash block"
 	depends on CRYPTO_DEV_UX500_CRYP || CRYPTO_DEV_UX500_HASH

drivers/crypto/ux500/Makefile

@@ -4,4 +4,5 @@
 # License terms: GNU General Public License (GPL) version 2
 #
 
+obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += hash/
 obj-$(CONFIG_CRYPTO_DEV_UX500_CRYP) += cryp/

drivers/crypto/ux500/hash/Makefile

+#
+# Copyright (C) ST-Ericsson SA 2010
+# Author: Shujuan Chen (shujuan.chen@stericsson.com)
+# License terms: GNU General Public License (GPL) version 2
+#
+ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG
+CFLAGS_hash_core.o := -DDEBUG -O0
+endif
+
+obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += ux500_hash.o
+ux500_hash-objs :=  hash_core.o

drivers/crypto/ux500/hash/hash_alg.h

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen (shujuan.chen@stericsson.com)
+ * Author: Joakim Bech (joakim.xx.bech@stericsson.com)
+ * Author: Berne Hebark (berne.hebark@stericsson.com))
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _HASH_ALG_H
+#define _HASH_ALG_H
+
+#include <linux/bitops.h>
+
+#define HASH_BLOCK_SIZE			64
+#define HASH_DMA_ALIGN_SIZE		4
+#define HASH_DMA_PERFORMANCE_MIN_SIZE	1024
+#define HASH_BYTES_PER_WORD		4
+
+/* Maximum value of the length's high word */
+#define HASH_HIGH_WORD_MAX_VAL		0xFFFFFFFFUL
+
+/* Power on Reset values HASH registers */
+#define HASH_RESET_CR_VALUE		0x0
+#define HASH_RESET_STR_VALUE		0x0
+
+/* Number of context swap registers */
+#define HASH_CSR_COUNT			52
+
+#define HASH_RESET_CSRX_REG_VALUE	0x0
+#define HASH_RESET_CSFULL_REG_VALUE	0x0
+#define HASH_RESET_CSDATAIN_REG_VALUE	0x0
+
+#define HASH_RESET_INDEX_VAL		0x0
+#define HASH_RESET_BIT_INDEX_VAL	0x0
+#define HASH_RESET_BUFFER_VAL		0x0
+#define HASH_RESET_LEN_HIGH_VAL		0x0
+#define HASH_RESET_LEN_LOW_VAL		0x0
+
+/* Control register bitfields */
+#define HASH_CR_RESUME_MASK	0x11FCF
+
+#define HASH_CR_SWITCHON_POS	31
+#define HASH_CR_SWITCHON_MASK	BIT(31)
+
+#define HASH_CR_EMPTYMSG_POS	20
+#define HASH_CR_EMPTYMSG_MASK	BIT(20)
+
+#define HASH_CR_DINF_POS	12
+#define HASH_CR_DINF_MASK	BIT(12)
+
+#define HASH_CR_NBW_POS		8
+#define HASH_CR_NBW_MASK	0x00000F00UL
+
+#define HASH_CR_LKEY_POS	16
+#define HASH_CR_LKEY_MASK	BIT(16)
+
+#define HASH_CR_ALGO_POS	7
+#define HASH_CR_ALGO_MASK	BIT(7)
+
+#define HASH_CR_MODE_POS	6
+#define HASH_CR_MODE_MASK	BIT(6)
+
+#define HASH_CR_DATAFORM_POS	4
+#define HASH_CR_DATAFORM_MASK	(BIT(4) | BIT(5))
+
+#define HASH_CR_DMAE_POS	3
+#define HASH_CR_DMAE_MASK	BIT(3)
+
+#define HASH_CR_INIT_POS	2
+#define HASH_CR_INIT_MASK	BIT(2)
+
+#define HASH_CR_PRIVN_POS	1
+#define HASH_CR_PRIVN_MASK	BIT(1)
+
+#define HASH_CR_SECN_POS	0
+#define HASH_CR_SECN_MASK	BIT(0)
+
+/* Start register bitfields */
+#define HASH_STR_DCAL_POS	8
+#define HASH_STR_DCAL_MASK	BIT(8)
+#define HASH_STR_DEFAULT	0x0
+
+#define HASH_STR_NBLW_POS	0
+#define HASH_STR_NBLW_MASK	0x0000001FUL
+
+#define HASH_NBLW_MAX_VAL	0x1F
+
+/* PrimeCell IDs */
+#define HASH_P_ID0		0xE0
+#define HASH_P_ID1		0x05
+#define HASH_P_ID2		0x38
+#define HASH_P_ID3		0x00
+#define HASH_CELL_ID0		0x0D
+#define HASH_CELL_ID1		0xF0
+#define HASH_CELL_ID2		0x05
+#define HASH_CELL_ID3		0xB1
+
+#define HASH_SET_BITS(reg_name, mask)	\
+	writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
+
+#define HASH_CLEAR_BITS(reg_name, mask)	\
+	writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name)
+
+#define HASH_PUT_BITS(reg, val, shift, mask)	\
+	writel_relaxed(((readl(reg) & ~(mask)) |	\
+		(((u32)val << shift) & (mask))), reg)
+
+#define HASH_SET_DIN(val, len)	writesl(&device_data->base->din, (val), (len))
+
+#define HASH_INITIALIZE			\
+	HASH_PUT_BITS(			\
+		&device_data->base->cr,	\
+		0x01, HASH_CR_INIT_POS,	\
+		HASH_CR_INIT_MASK)
+
+#define HASH_SET_DATA_FORMAT(data_format)				\
+		HASH_PUT_BITS(						\
+			&device_data->base->cr,				\
+			(u32) (data_format), HASH_CR_DATAFORM_POS,	\
+			HASH_CR_DATAFORM_MASK)
+#define HASH_SET_NBLW(val)					\
+		HASH_PUT_BITS(					\
+			&device_data->base->str,		\
+			(u32) (val), HASH_STR_NBLW_POS,		\
+			HASH_STR_NBLW_MASK)
+#define HASH_SET_DCAL					\
+		HASH_PUT_BITS(				\
+			&device_data->base->str,	\
+			0x01, HASH_STR_DCAL_POS,	\
+			HASH_STR_DCAL_MASK)
+
+/* Hardware access method */
+enum hash_mode {
+	HASH_MODE_CPU,
+	HASH_MODE_DMA
+};
+
+/**
+ * struct uint64 - Structure to handle 64 bits integers.
+ * @high_word:	Most significant bits.
+ * @low_word:	Least significant bits.
+ *
+ * Used to handle 64 bits integers.
+ */
+struct uint64 {
+	u32 high_word;
+	u32 low_word;
+};
+
+/**
+ * struct hash_register - Contains all registers in ux500 hash hardware.
+ * @cr:		HASH control register (0x000).
+ * @din:	HASH data input register (0x004).
+ * @str:	HASH start register (0x008).
+ * @hx:		HASH digest register 0..7 (0x00c-0x01C).
+ * @padding0:	Reserved (0x02C).
+ * @itcr:	Integration test control register (0x080).
+ * @itip:	Integration test input register (0x084).
+ * @itop:	Integration test output register (0x088).
+ * @padding1:	Reserved (0x08C).
+ * @csfull:	HASH context full register (0x0F8).
+ * @csdatain:	HASH context swap data input register (0x0FC).
+ * @csrx:	HASH context swap register 0..51 (0x100-0x1CC).
+ * @padding2:	Reserved (0x1D0).
+ * @periphid0:	HASH peripheral identification register 0 (0xFE0).
+ * @periphid1:	HASH peripheral identification register 1 (0xFE4).
+ * @periphid2:	HASH peripheral identification register 2 (0xFE8).
+ * @periphid3:	HASH peripheral identification register 3 (0xFEC).
+ * @cellid0:	HASH PCell identification register 0 (0xFF0).
+ * @cellid1:	HASH PCell identification register 1 (0xFF4).
+ * @cellid2:	HASH PCell identification register 2 (0xFF8).
+ * @cellid3:	HASH PCell identification register 3 (0xFFC).
+ *
+ * The device communicates to the HASH via 32-bit-wide control registers
+ * accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure
+ * with the registers used.
+ */
+struct hash_register {
+	u32 cr;
+	u32 din;
+	u32 str;
+	u32 hx[8];
+
+	u32 padding0[(0x080 - 0x02C) / sizeof(u32)];
+
+	u32 itcr;
+	u32 itip;
+	u32 itop;
+
+	u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)];
+
+	u32 csfull;
+	u32 csdatain;
+	u32 csrx[HASH_CSR_COUNT];
+
+	u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)];
+
+	u32 periphid0;
+	u32 periphid1;
+	u32 periphid2;
+	u32 periphid3;
+
+	u32 cellid0;
+	u32 cellid1;
+	u32 cellid2;
+	u32 cellid3;
+};
+
+/**
+ * struct hash_state - Hash context state.
+ * @temp_cr:	Temporary HASH Control Register.
+ * @str_reg:	HASH Start Register.
+ * @din_reg:	HASH Data Input Register.
+ * @csr[52]:	HASH Context Swap Registers 0-39.
+ * @csfull:	HASH Context Swap Registers 40 ie Status flags.
+ * @csdatain:	HASH Context Swap Registers 41 ie Input data.
+ * @buffer:	Working buffer for messages going to the hardware.
+ * @length:	Length of the part of message hashed so far (floor(N/64) * 64).
+ * @index:	Valid number of bytes in buffer (N % 64).
+ * @bit_index:	Valid number of bits in buffer (N % 8).
+ *
+ * This structure is used between context switches, i.e. when ongoing jobs are
+ * interupted with new jobs. When this happens we need to store intermediate
+ * results in software.
+ *
+ * WARNING: "index" is the  member of the structure, to be sure  that "buffer"
+ * is aligned on a 4-bytes boundary. This is highly implementation dependent
+ * and MUST be checked whenever this code is ported on new platforms.
+ */
+struct hash_state {
+	u32		temp_cr;
+	u32		str_reg;
+	u32		din_reg;
+	u32		csr[52];
+	u32		csfull;
+	u32		csdatain;
+	u32		buffer[HASH_BLOCK_SIZE / sizeof(u32)];
+	struct uint64	length;
+	u8		index;
+	u8		bit_index;
+};
+
+/**
+ * enum hash_device_id - HASH device ID.
+ * @HASH_DEVICE_ID_0: Hash hardware with ID 0
+ * @HASH_DEVICE_ID_1: Hash hardware with ID 1
+ */
+enum hash_device_id {
+	HASH_DEVICE_ID_0 = 0,
+	HASH_DEVICE_ID_1 = 1
+};
+
+/**
+ * enum hash_data_format - HASH data format.
+ * @HASH_DATA_32_BITS:	32 bits data format
+ * @HASH_DATA_16_BITS:	16 bits data format
+ * @HASH_DATA_8_BITS:	8 bits data format.
+ * @HASH_DATA_1_BITS:	1 bit data format.
+ */
+enum hash_data_format {
+	HASH_DATA_32_BITS	= 0x0,
+	HASH_DATA_16_BITS	= 0x1,
+	HASH_DATA_8_BITS	= 0x2,
+	HASH_DATA_1_BIT		= 0x3
+};
+
+/**
+ * enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm.
+ * @HASH_ALGO_SHA1: Indicates that SHA1 is used.
+ * @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used.
+ */
+enum hash_algo {
+	HASH_ALGO_SHA1		= 0x0,
+	HASH_ALGO_SHA256	= 0x1
+};
+
+/**
+ * enum hash_op - Enumeration for selecting between HASH or HMAC mode.
+ * @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode.
+ * @HASH_OPER_MODE_HMAC: Indicates usage of HMAC.
+ */
+enum hash_op {
+	HASH_OPER_MODE_HASH = 0x0,
+	HASH_OPER_MODE_HMAC = 0x1
+};
+
+/**
+ * struct hash_config - Configuration data for the hardware.
+ * @data_format:	Format of data entered into the hash data in register.
+ * @algorithm:		Algorithm selection bit.
+ * @oper_mode:		Operating mode selection bit.
+ */
+struct hash_config {
+	int data_format;
+	int algorithm;
+	int oper_mode;
+};
+
+/**
+ * struct hash_dma - Structure used for dma.
+ * @mask:		DMA capabilities bitmap mask.
+ * @complete:		Used to maintain state for a "completion".
+ * @chan_mem2hash:	DMA channel.
+ * @cfg_mem2hash:	DMA channel configuration.
+ * @sg_len:		Scatterlist length.
+ * @sg:			Scatterlist.
+ * @nents:		Number of sg entries.
+ */
+struct hash_dma {
+	dma_cap_mask_t		mask;
+	struct completion	complete;
+	struct dma_chan		*chan_mem2hash;
+	void			*cfg_mem2hash;
+	int			sg_len;
+	struct scatterlist	*sg;
+	int			nents;
+};
+
+/**
+ * struct hash_ctx - The context used for hash calculations.
+ * @key:	The key used in the operation.
+ * @keylen:	The length of the key.
+ * @state:	The state of the current calculations.
+ * @config:	The current configuration.
+ * @digestsize:	The size of current digest.
+ * @device:	Pointer to the device structure.
+ */
+struct hash_ctx {
+	u8			*key;
+	u32			keylen;
+	struct hash_config	config;
+	int			digestsize;
+	struct hash_device_data	*device;
+};
+
+/**
+ * struct hash_ctx - The request context used for hash calculations.
+ * @state:	The state of the current calculations.
+ * @dma_mode:	Used in special cases (workaround), e.g. need to change to
+ *		cpu mode, if not supported/working in dma mode.
+ * @updated:	Indicates if hardware is initialized for new operations.
+ */
+struct hash_req_ctx {
+	struct hash_state	state;
+	bool			dma_mode;
+	u8			updated;
+};
+
+/**
+ * struct hash_device_data - structure for a hash device.
+ * @base:		Pointer to the hardware base address.
+ * @list_node:		For inclusion in klist.
+ * @dev:		Pointer to the device dev structure.
+ * @ctx_lock:		Spinlock for current_ctx.
+ * @current_ctx:	Pointer to the currently allocated context.
+ * @power_state:	TRUE = power state on, FALSE = power state off.
+ * @power_state_lock:	Spinlock for power_state.
+ * @regulator:		Pointer to the device's power control.
+ * @clk:		Pointer to the device's clock control.
+ * @restore_dev_state:	TRUE = saved state, FALSE = no saved state.
+ * @dma:		Structure used for dma.
+ */
+struct hash_device_data {
+	struct hash_register __iomem	*base;
+	struct klist_node	list_node;
+	struct device		*dev;
+	struct spinlock		ctx_lock;
+	struct hash_ctx		*current_ctx;
+	bool			power_state;
+	struct spinlock		power_state_lock;
+	struct regulator	*regulator;
+	struct clk		*clk;
+	bool			restore_dev_state;
+	struct hash_state	state; /* Used for saving and resuming state */
+	struct hash_dma		dma;
+};
+
+int hash_check_hw(struct hash_device_data *device_data);
+
+int hash_setconfiguration(struct hash_device_data *device_data,
+		struct hash_config *config);
+
+void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx);
+
+void hash_get_digest(struct hash_device_data *device_data,
+		u8 *digest, int algorithm);
+
+int hash_hw_update(struct ahash_request *req);
+
+int hash_save_state(struct hash_device_data *device_data,
+		struct hash_state *state);
+
+int hash_resume_state(struct hash_device_data *device_data,
+		const struct hash_state *state);
+
+#endif

drivers/crypto/ux500/hash/hash_core.c

+/*
+ * Cryptographic API.
+ * Support for Nomadik hardware crypto engine.
+
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/klist.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crypto.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/dmaengine.h>
+#include <linux/bitops.h>
+
+#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/algapi.h>
+
+#include <mach/crypto-ux500.h>
+#include <mach/hardware.h>
+
+#include "hash_alg.h"
+
+#define DEV_DBG_NAME "hashX hashX:"
+
+static int hash_mode;
+module_param(hash_mode, int, 0);
+MODULE_PARM_DESC(hash_mode, "CPU or DMA mode. CPU = 0 (default), DMA = 1");
+
+/**
+ * Pre-calculated empty message digests.
+ */
+static u8 zero_message_hash_sha1[SHA1_DIGEST_SIZE] = {
+	0xda, 0x39, 0xa3, 0xee, 0x5e, 0x6b, 0x4b, 0x0d,
+	0x32, 0x55, 0xbf, 0xef, 0x95, 0x60, 0x18, 0x90,
+	0xaf, 0xd8, 0x07, 0x09
+};
+
+static u8 zero_message_hash_sha256[SHA256_DIGEST_SIZE] = {
+	0xe3, 0xb0, 0xc4, 0x42, 0x98, 0xfc, 0x1c, 0x14,
+	0x9a, 0xfb, 0xf4, 0xc8, 0x99, 0x6f, 0xb9, 0x24,
+	0x27, 0xae, 0x41, 0xe4, 0x64, 0x9b, 0x93, 0x4c,
+	0xa4, 0x95, 0x99, 0x1b, 0x78, 0x52, 0xb8, 0x55
+};
+
+/* HMAC-SHA1, no key */
+static u8 zero_message_hmac_sha1[SHA1_DIGEST_SIZE] = {
+	0xfb, 0xdb, 0x1d, 0x1b, 0x18, 0xaa, 0x6c, 0x08,
+	0x32, 0x4b, 0x7d, 0x64, 0xb7, 0x1f, 0xb7, 0x63,
+	0x70, 0x69, 0x0e, 0x1d
+};
+
+/* HMAC-SHA256, no key */
+static u8 zero_message_hmac_sha256[SHA256_DIGEST_SIZE] = {
+	0xb6, 0x13, 0x67, 0x9a, 0x08, 0x14, 0xd9, 0xec,
+	0x77, 0x2f, 0x95, 0xd7, 0x78, 0xc3, 0x5f, 0xc5,
+	0xff, 0x16, 0x97, 0xc4, 0x93, 0x71, 0x56, 0x53,
+	0xc6, 0xc7, 0x12, 0x14, 0x42, 0x92, 0xc5, 0xad
+};
+
+/**
+ * struct hash_driver_data - data specific to the driver.
+ *
+ * @device_list:	A list of registered devices to choose from.
+ * @device_allocation:	A semaphore initialized with number of devices.
+ */
+struct hash_driver_data {
+	struct klist		device_list;
+	struct semaphore	device_allocation;
+};
+
+static struct hash_driver_data	driver_data;
+
+/* Declaration of functions */
+/**
+ * hash_messagepad - Pads a message and write the nblw bits.
+ * @device_data:	Structure for the hash device.
+ * @message:		Last word of a message
+ * @index_bytes:	The number of bytes in the last message
+ *
+ * This function manages the final part of the digest calculation, when less
+ * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
+ *
+ */
+static void hash_messagepad(struct hash_device_data *device_data,
+		const u32 *message, u8 index_bytes);
+
+/**
+ * release_hash_device - Releases a previously allocated hash device.
+ * @device_data:	Structure for the hash device.
+ *
+ */
+static void release_hash_device(struct hash_device_data *device_data)
+{
+	spin_lock(&device_data->ctx_lock);
+	device_data->current_ctx->device = NULL;
+	device_data->current_ctx = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+	/*
+	 * The down_interruptible part for this semaphore is called in
+	 * cryp_get_device_data.
+	 */
+	up(&driver_data.device_allocation);
+}
+
+static void hash_dma_setup_channel(struct hash_device_data *device_data,
+				struct device *dev)
+{
+	struct hash_platform_data *platform_data = dev->platform_data;
+	dma_cap_zero(device_data->dma.mask);
+	dma_cap_set(DMA_SLAVE, device_data->dma.mask);
+
+	device_data->dma.cfg_mem2hash = platform_data->mem_to_engine;
+	device_data->dma.chan_mem2hash =
+		dma_request_channel(device_data->dma.mask,
+				platform_data->dma_filter,
+				device_data->dma.cfg_mem2hash);
+
+	init_completion(&device_data->dma.complete);
+}
+
+static void hash_dma_callback(void *data)
+{
+	struct hash_ctx *ctx = (struct hash_ctx *) data;
+
+	complete(&ctx->device->dma.complete);
+}
+
+static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
+		int len, enum dma_data_direction direction)
+{
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *channel = NULL;
+	dma_cookie_t cookie;
+
+	if (direction != DMA_TO_DEVICE) {
+		dev_err(ctx->device->dev, "[%s] Invalid DMA direction",
+				__func__);
+		return -EFAULT;
+	}
+
+	sg->length = ALIGN(sg->length, HASH_DMA_ALIGN_SIZE);
+
+	channel = ctx->device->dma.chan_mem2hash;
+	ctx->device->dma.sg = sg;
+	ctx->device->dma.sg_len = dma_map_sg(channel->device->dev,
+			ctx->device->dma.sg, ctx->device->dma.nents,
+			direction);
+
+	if (!ctx->device->dma.sg_len) {
+		dev_err(ctx->device->dev,
+				"[%s]: Could not map the sg list (TO_DEVICE)",
+				__func__);
+		return -EFAULT;
+	}
+
+	dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
+			"(TO_DEVICE)", __func__);
+	desc = channel->device->device_prep_slave_sg(channel,
+			ctx->device->dma.sg, ctx->device->dma.sg_len,
+			direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+	if (!desc) {
+		dev_err(ctx->device->dev,
+			"[%s]: device_prep_slave_sg() failed!", __func__);
+		return -EFAULT;
+	}
+
+	desc->callback = hash_dma_callback;
+	desc->callback_param = ctx;
+
+	cookie = desc->tx_submit(desc);
+	dma_async_issue_pending(channel);
+
+	return 0;
+}
+
+static void hash_dma_done(struct hash_ctx *ctx)
+{
+	struct dma_chan *chan;
+
+	chan = ctx->device->dma.chan_mem2hash;
+	chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+	dma_unmap_sg(chan->device->dev, ctx->device->dma.sg,
+			ctx->device->dma.sg_len, DMA_TO_DEVICE);
+
+}
+
+static int hash_dma_write(struct hash_ctx *ctx,
+		struct scatterlist *sg, int len)
+{
+	int error = hash_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
+	if (error) {
+		dev_dbg(ctx->device->dev, "[%s]: hash_set_dma_transfer() "
+			"failed", __func__);
+		return error;
+	}
+
+	return len;
+}
+
+/**
+ * get_empty_message_digest - Returns a pre-calculated digest for
+ * the empty message.
+ * @device_data:	Structure for the hash device.
+ * @zero_hash:		Buffer to return the empty message digest.
+ * @zero_hash_size:	Hash size of the empty message digest.
+ * @zero_digest:	True if zero_digest returned.
+ */
+static int get_empty_message_digest(
+		struct hash_device_data *device_data,
+		u8 *zero_hash, u32 *zero_hash_size, bool *zero_digest)
+{
+	int ret = 0;
+	struct hash_ctx *ctx = device_data->current_ctx;
+	*zero_digest = false;
+
+	/**
+	 * Caller responsible for ctx != NULL.
+	 */
+
+	if (HASH_OPER_MODE_HASH == ctx->config.oper_mode) {
+		if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
+			memcpy(zero_hash, &zero_message_hash_sha1[0],
+					SHA1_DIGEST_SIZE);
+			*zero_hash_size = SHA1_DIGEST_SIZE;
+			*zero_digest = true;
+		} else if (HASH_ALGO_SHA256 ==
+				ctx->config.algorithm) {
+			memcpy(zero_hash, &zero_message_hash_sha256[0],
+					SHA256_DIGEST_SIZE);
+			*zero_hash_size = SHA256_DIGEST_SIZE;
+			*zero_digest = true;
+		} else {
+			dev_err(device_data->dev, "[%s] "
+					"Incorrect algorithm!"
+					, __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+	} else if (HASH_OPER_MODE_HMAC == ctx->config.oper_mode) {
+		if (!ctx->keylen) {
+			if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
+				memcpy(zero_hash, &zero_message_hmac_sha1[0],
+						SHA1_DIGEST_SIZE);
+				*zero_hash_size = SHA1_DIGEST_SIZE;
+				*zero_digest = true;
+			} else if (HASH_ALGO_SHA256 == ctx->config.algorithm) {
+				memcpy(zero_hash, &zero_message_hmac_sha256[0],
+						SHA256_DIGEST_SIZE);
+				*zero_hash_size = SHA256_DIGEST_SIZE;
+				*zero_digest = true;
+			} else {
+				dev_err(device_data->dev, "[%s] "
+						"Incorrect algorithm!"
+						, __func__);
+				ret = -EINVAL;
+				goto out;
+			}
+		} else {
+			dev_dbg(device_data->dev, "[%s] Continue hash "
+					"calculation, since hmac key avalable",
+					__func__);
+		}
+	}
+out:
+
+	return ret;
+}
+
+/**
+ * hash_disable_power - Request to disable power and clock.
+ * @device_data:	Structure for the hash device.
+ * @save_device_state:	If true, saves the current hw state.
+ *
+ * This function request for disabling power (regulator) and clock,
+ * and could also save current hw state.
+ */
+static int hash_disable_power(
+		struct hash_device_data *device_data,
+		bool			save_device_state)
+{
+	int ret = 0;
+	struct device *dev = device_data->dev;
+
+	spin_lock(&device_data->power_state_lock);
+	if (!device_data->power_state)
+		goto out;
+
+	if (save_device_state) {
+		hash_save_state(device_data,
+				&device_data->state);
+		device_data->restore_dev_state = true;
+	}
+
+	clk_disable(device_data->clk);
+	ret = regulator_disable(device_data->regulator);
+	if (ret)
+		dev_err(dev, "[%s] regulator_disable() failed!", __func__);
+
+	device_data->power_state = false;
+
+out:
+	spin_unlock(&device_data->power_state_lock);
+
+	return ret;
+}
+
+/**
+ * hash_enable_power - Request to enable power and clock.
+ * @device_data:		Structure for the hash device.
+ * @restore_device_state:	If true, restores a previous saved hw state.
+ *
+ * This function request for enabling power (regulator) and clock,
+ * and could also restore a previously saved hw state.
+ */
+static int hash_enable_power(
+		struct hash_device_data *device_data,
+		bool			restore_device_state)
+{
+	int ret = 0;
+	struct device *dev = device_data->dev;
+
+	spin_lock(&device_data->power_state_lock);
+	if (!device_data->power_state) {
+		ret = regulator_enable(device_data->regulator);
+		if (ret) {
+			dev_err(dev, "[%s]: regulator_enable() failed!",
+					__func__);
+			goto out;
+		}
+		ret = clk_enable(device_data->clk);
+		if (ret) {
+			dev_err(dev, "[%s]: clk_enable() failed!",
+					__func__);
+			ret = regulator_disable(
+					device_data->regulator);
+			goto out;
+		}
+		device_data->power_state = true;
+	}
+
+	if (device_data->restore_dev_state) {
+		if (restore_device_state) {
+			device_data->restore_dev_state = false;
+			hash_resume_state(device_data,
+				&device_data->state);
+		}
+	}
+out:
+	spin_unlock(&device_data->power_state_lock);
+
+	return ret;
+}
+
+/**
+ * hash_get_device_data - Checks for an available hash device and return it.
+ * @hash_ctx:		Structure for the hash context.
+ * @device_data:	Structure for the hash device.
+ *
+ * This function check for an available hash device and return it to
+ * the caller.
+ * Note! Caller need to release the device, calling up().
+ */
+static int hash_get_device_data(struct hash_ctx *ctx,
+				struct hash_device_data **device_data)
+{
+	int			ret;
+	struct klist_iter	device_iterator;
+	struct klist_node	*device_node;
+	struct hash_device_data *local_device_data = NULL;
+
+	/* Wait until a device is available */
+	ret = down_interruptible(&driver_data.device_allocation);
+	if (ret)
+		return ret;  /* Interrupted */
+
+	/* Select a device */
+	klist_iter_init(&driver_data.device_list, &device_iterator);
+	device_node = klist_next(&device_iterator);
+	while (device_node) {
+		local_device_data = container_of(device_node,
+					   struct hash_device_data, list_node);
+		spin_lock(&local_device_data->ctx_lock);
+		/* current_ctx allocates a device, NULL = unallocated */
+		if (local_device_data->current_ctx) {
+			device_node = klist_next(&device_iterator);
+		} else {
+			local_device_data->current_ctx = ctx;
+			ctx->device = local_device_data;
+			spin_unlock(&local_device_data->ctx_lock);
+			break;
+		}
+		spin_unlock(&local_device_data->ctx_lock);
+	}
+	klist_iter_exit(&device_iterator);
+
+	if (!device_node) {
+		/**
+		 * No free device found.
+		 * Since we allocated a device with down_interruptible, this
+		 * should not be able to happen.
+		 * Number of available devices, which are contained in
+		 * device_allocation, is therefore decremented by not doing
+		 * an up(device_allocation).
+		 */
+		return -EBUSY;
+	}
+
+	*device_data = local_device_data;
+
+	return 0;
+}
+
+/**
+ * hash_hw_write_key - Writes the key to the hardware registries.
+ *
+ * @device_data:	Structure for the hash device.
+ * @key:		Key to be written.
+ * @keylen:		The lengt of the key.
+ *
+ * Note! This function DOES NOT write to the NBLW registry, even though
+ * specified in the the hw design spec. Either due to incorrect info in the
+ * spec or due to a bug in the hw.
+ */
+static void hash_hw_write_key(struct hash_device_data *device_data,
+		const u8 *key, unsigned int keylen)
+{
+	u32 word = 0;
+	int nwords = 1;
+
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+
+	while (keylen >= 4) {
+		u32 *key_word = (u32 *)key;
+
+		HASH_SET_DIN(key_word, nwords);
+		keylen -= 4;
+		key += 4;
+	}
+
+	/* Take care of the remaining bytes in the last word */
+	if (keylen) {
+		word = 0;
+		while (keylen) {
+			word |= (key[keylen - 1] << (8 * (keylen - 1)));
+			keylen--;
+		}
+
+		HASH_SET_DIN(&word, nwords);
+	}
+
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	HASH_SET_DCAL;
+
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+}
+
+/**
+ * init_hash_hw - Initialise the hash hardware for a new calculation.
+ * @device_data:	Structure for the hash device.
+ * @ctx:		The hash context.
+ *
+ * This function will enable the bits needed to clear and start a new
+ * calculation.
+ */
+static int init_hash_hw(struct hash_device_data *device_data,
+		struct hash_ctx *ctx)
+{
+	int ret = 0;
+
+	ret = hash_setconfiguration(device_data, &ctx->config);
+	if (ret) {
+		dev_err(device_data->dev, "[%s] hash_setconfiguration() "
+				"failed!", __func__);
+		return ret;
+	}
+
+	hash_begin(device_data, ctx);
+
+	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
+		hash_hw_write_key(device_data, ctx->key, ctx->keylen);
+
+	return ret;
+}
+
+/**
+ * hash_get_nents - Return number of entries (nents) in scatterlist (sg).
+ *
+ * @sg:		Scatterlist.
+ * @size:	Size in bytes.
+ * @aligned:	True if sg data aligned to work in DMA mode.
+ *
+ */
+static int hash_get_nents(struct scatterlist *sg, int size, bool *aligned)
+{
+	int nents = 0;
+	bool aligned_data = true;
+
+	while (size > 0 && sg) {
+		nents++;
+		size -= sg->length;
+
+		/* hash_set_dma_transfer will align last nent */
+		if ((aligned && !IS_ALIGNED(sg->offset, HASH_DMA_ALIGN_SIZE))
+			|| (!IS_ALIGNED(sg->length, HASH_DMA_ALIGN_SIZE) &&
+				size > 0))
+			aligned_data = false;
+
+		sg = sg_next(sg);
+	}
+
+	if (aligned)
+		*aligned = aligned_data;
+
+	if (size != 0)
+		return -EFAULT;
+
+	return nents;
+}
+
+/**
+ * hash_dma_valid_data - checks for dma valid sg data.
+ * @sg:		Scatterlist.
+ * @datasize:	Datasize in bytes.
+ *
+ * NOTE! This function checks for dma valid sg data, since dma
+ * only accept datasizes of even wordsize.
+ */
+static bool hash_dma_valid_data(struct scatterlist *sg, int datasize)
+{
+	bool aligned;
+
+	/* Need to include at least one nent, else error */
+	if (hash_get_nents(sg, datasize, &aligned) < 1)
+		return false;
+
+	return aligned;
+}
+
+/**
+ * hash_init - Common hash init function for SHA1/SHA2 (SHA256).
+ * @req: The hash request for the job.
+ *
+ * Initialize structures.
+ */
+static int hash_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+
+	if (!ctx->key)
+		ctx->keylen = 0;
+
+	memset(&req_ctx->state, 0, sizeof(struct hash_state));
+	req_ctx->updated = 0;
+	if (hash_mode == HASH_MODE_DMA) {
+		if ((ctx->config.oper_mode == HASH_OPER_MODE_HMAC) &&
+				cpu_is_u5500()) {
+			pr_debug(DEV_DBG_NAME " [%s] HMAC and DMA not working "
+					"on u5500, directing to CPU mode.",
+					__func__);
+			req_ctx->dma_mode = false; /* Don't use DMA */
+			goto out;
+		}
+
+		if (req->nbytes < HASH_DMA_ALIGN_SIZE) {
+			req_ctx->dma_mode = false; /* Don't use DMA */
+
+			pr_debug(DEV_DBG_NAME " [%s] DMA mode, but direct "
+					"to CPU mode for data size < %d",
+					__func__, HASH_DMA_ALIGN_SIZE);
+		} else {
+			if (req->nbytes >= HASH_DMA_PERFORMANCE_MIN_SIZE &&
+					hash_dma_valid_data(req->src,
+						req->nbytes)) {
+				req_ctx->dma_mode = true;
+			} else {
+				req_ctx->dma_mode = false;
+				pr_debug(DEV_DBG_NAME " [%s] DMA mode, but use"
+						" CPU mode for datalength < %d"
+						" or non-aligned data, except "
+						"in last nent", __func__,
+						HASH_DMA_PERFORMANCE_MIN_SIZE);
+			}
+		}
+	}
+out:
+	return 0;
+}
+
+/**
+ * hash_processblock - This function processes a single block of 512 bits (64
+ *                     bytes), word aligned, starting at message.
+ * @device_data:	Structure for the hash device.
+ * @message:		Block (512 bits) of message to be written to
+ *			the HASH hardware.
+ *
+ */
+static void hash_processblock(
+		struct hash_device_data *device_data,
+		const u32 *message, int length)
+{
+	int len = length / HASH_BYTES_PER_WORD;
+	/*
+	 * NBLW bits. Reset the number of bits in last word (NBLW).
+	 */
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+
+	/*
+	 * Write message data to the HASH_DIN register.
+	 */
+	HASH_SET_DIN(message, len);
+}
+
+/**
+ * hash_messagepad - Pads a message and write the nblw bits.
+ * @device_data:	Structure for the hash device.
+ * @message:		Last word of a message.
+ * @index_bytes:	The number of bytes in the last message.
+ *
+ * This function manages the final part of the digest calculation, when less
+ * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
+ *
+ */
+static void hash_messagepad(struct hash_device_data *device_data,
+		const u32 *message, u8 index_bytes)
+{
+	int nwords = 1;
+
+	/*
+	 * Clear hash str register, only clear NBLW
+	 * since DCAL will be reset by hardware.
+	 */
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+
+	/* Main loop */
+	while (index_bytes >= 4) {
+		HASH_SET_DIN(message, nwords);
+		index_bytes -= 4;
+		message++;
+	}
+
+	if (index_bytes)
+		HASH_SET_DIN(message, nwords);
+
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	/* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */
+	HASH_SET_NBLW(index_bytes * 8);
+	dev_dbg(device_data->dev, "[%s] DIN=0x%08x NBLW=%d", __func__,
+			readl_relaxed(&device_data->base->din),
+			(int)(readl_relaxed(&device_data->base->str) &
+				HASH_STR_NBLW_MASK));
+	HASH_SET_DCAL;
+	dev_dbg(device_data->dev, "[%s] after dcal -> DIN=0x%08x NBLW=%d",
+			__func__, readl_relaxed(&device_data->base->din),
+			(int)(readl_relaxed(&device_data->base->str) &
+				HASH_STR_NBLW_MASK));
+
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+}
+
+/**
+ * hash_incrementlength - Increments the length of the current message.
+ * @ctx: Hash context
+ * @incr: Length of message processed already
+ *
+ * Overflow cannot occur, because conditions for overflow are checked in
+ * hash_hw_update.
+ */
+static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr)
+{
+	ctx->state.length.low_word += incr;
+
+	/* Check for wrap-around */
+	if (ctx->state.length.low_word < incr)
+		ctx->state.length.high_word++;
+}
+
+/**
+ * hash_setconfiguration - Sets the required configuration for the hash
+ *                         hardware.
+ * @device_data:	Structure for the hash device.
+ * @config:		Pointer to a configuration structure.
+ */
+int hash_setconfiguration(struct hash_device_data *device_data,
+		struct hash_config *config)
+{
+	int ret = 0;
+
+	if (config->algorithm != HASH_ALGO_SHA1 &&
+	    config->algorithm != HASH_ALGO_SHA256)
+		return -EPERM;
+
+	/*
+	 * DATAFORM bits. Set the DATAFORM bits to 0b11, which means the data
+	 * to be written to HASH_DIN is considered as 32 bits.
+	 */
+	HASH_SET_DATA_FORMAT(config->data_format);
+
+	/*
+	 * ALGO bit. Set to 0b1 for SHA-1 and 0b0 for SHA-256
+	 */
+	switch (config->algorithm) {
+	case HASH_ALGO_SHA1:
+		HASH_SET_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
+		break;
+
+	case HASH_ALGO_SHA256:
+		HASH_CLEAR_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
+		break;
+
+	default:
+		dev_err(device_data->dev, "[%s] Incorrect algorithm.",
+				__func__);
+		return -EPERM;
+	}
+
+	/*
+	 * MODE bit. This bit selects between HASH or HMAC mode for the
+	 * selected algorithm. 0b0 = HASH and 0b1 = HMAC.
+	 */
+	if (HASH_OPER_MODE_HASH == config->oper_mode)
+		HASH_CLEAR_BITS(&device_data->base->cr,
+				HASH_CR_MODE_MASK);
+	else if (HASH_OPER_MODE_HMAC == config->oper_mode) {
+		HASH_SET_BITS(&device_data->base->cr,
+				HASH_CR_MODE_MASK);
+		if (device_data->current_ctx->keylen > HASH_BLOCK_SIZE) {
+			/* Truncate key to blocksize */
+			dev_dbg(device_data->dev, "[%s] LKEY set", __func__);
+			HASH_SET_BITS(&device_data->base->cr,
+					HASH_CR_LKEY_MASK);
+		} else {
+			dev_dbg(device_data->dev, "[%s] LKEY cleared",
+					__func__);
+			HASH_CLEAR_BITS(&device_data->base->cr,
+					HASH_CR_LKEY_MASK);
+		}
+	} else {	/* Wrong hash mode */
+		ret = -EPERM;
+		dev_err(device_data->dev, "[%s] HASH_INVALID_PARAMETER!",
+				__func__);
+	}
+	return ret;
+}
+
+/**
+ * hash_begin - This routine resets some globals and initializes the hash
+ *              hardware.
+ * @device_data:	Structure for the hash device.
+ * @ctx:		Hash context.
+ */
+void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
+{
+	/* HW and SW initializations */
+	/* Note: there is no need to initialize buffer and digest members */
+
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	/*
+	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
+	 * prepare the initialize the HASH accelerator to compute the message
+	 * digest of a new message.
+	 */
+	HASH_INITIALIZE;
+
+	/*
+	 * NBLW bits. Reset the number of bits in last word (NBLW).
+	 */
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+}
+
+int hash_process_data(
+		struct hash_device_data *device_data,
+		struct hash_ctx *ctx, struct hash_req_ctx *req_ctx,
+		int msg_length, u8 *data_buffer, u8 *buffer, u8 *index)
+{
+	int ret = 0;
+	u32 count;
+
+	do {
+		if ((*index + msg_length) < HASH_BLOCK_SIZE) {
+			for (count = 0; count < msg_length; count++) {
+				buffer[*index + count] =
+					*(data_buffer + count);
+			}
+			*index += msg_length;
+			msg_length = 0;
+		} else {
+			if (req_ctx->updated) {
+
+				ret = hash_resume_state(device_data,
+						&device_data->state);
+				memmove(req_ctx->state.buffer,
+						device_data->state.buffer,
+						HASH_BLOCK_SIZE / sizeof(u32));
+				if (ret) {
+					dev_err(device_data->dev, "[%s] "
+							"hash_resume_state()"
+							" failed!", __func__);
+					goto out;
+				}
+			} else {
+				ret = init_hash_hw(device_data, ctx);
+				if (ret) {
+					dev_err(device_data->dev, "[%s] "
+							"init_hash_hw()"
+							" failed!", __func__);
+					goto out;
+				}
+				req_ctx->updated = 1;
+			}
+			/*
+			 * If 'data_buffer' is four byte aligned and
+			 * local buffer does not have any data, we can
+			 * write data directly from 'data_buffer' to
+			 * HW peripheral, otherwise we first copy data
+			 * to a local buffer
+			 */
+			if ((0 == (((u32)data_buffer) % 4))
+					&& (0 == *index))
+				hash_processblock(device_data,
+						(const u32 *)
+						data_buffer, HASH_BLOCK_SIZE);
+			else {
+				for (count = 0; count <
+						(u32)(HASH_BLOCK_SIZE -
+							*index);
+						count++) {
+					buffer[*index + count] =
+						*(data_buffer + count);
+				}
+				hash_processblock(device_data,
+						(const u32 *)buffer,
+						HASH_BLOCK_SIZE);
+			}
+			hash_incrementlength(req_ctx, HASH_BLOCK_SIZE);
+			data_buffer += (HASH_BLOCK_SIZE - *index);
+
+			msg_length -= (HASH_BLOCK_SIZE - *index);
+			*index = 0;
+
+			ret = hash_save_state(device_data,
+					&device_data->state);
+
+			memmove(device_data->state.buffer,
+					req_ctx->state.buffer,
+					HASH_BLOCK_SIZE / sizeof(u32));
+			if (ret) {
+				dev_err(device_data->dev, "[%s] "
+						"hash_save_state()"
+						" failed!", __func__);
+				goto out;
+			}
+		}
+	} while (msg_length != 0);
+out:
+
+	return ret;
+}
+
+/**
+ * hash_dma_final - The hash dma final function for SHA1/SHA256.
+ * @req:	The hash request for the job.
+ */
+static int hash_dma_final(struct ahash_request *req)
+{
+	int ret = 0;
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+	struct hash_device_data *device_data;
+	u8 digest[SHA256_DIGEST_SIZE];
+	int bytes_written = 0;
+
+	ret = hash_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	dev_dbg(device_data->dev, "[%s] (ctx=0x%x)!", __func__, (u32) ctx);
+
+	if (req_ctx->updated) {
+		ret = hash_resume_state(device_data, &device_data->state);
+
+		if (ret) {
+			dev_err(device_data->dev, "[%s] hash_resume_state() "
+					"failed!", __func__);
+			goto out;
+		}
+
+	}
+
+	if (!req_ctx->updated) {
+		ret = hash_setconfiguration(device_data, &ctx->config);
+		if (ret) {
+			dev_err(device_data->dev, "[%s] "
+					"hash_setconfiguration() failed!",
+					__func__);
+			goto out;
+		}
+
+		/* Enable DMA input */
+		if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) {
+			HASH_CLEAR_BITS(&device_data->base->cr,
+					HASH_CR_DMAE_MASK);
+		} else {
+			HASH_SET_BITS(&device_data->base->cr,
+					HASH_CR_DMAE_MASK);
+			HASH_SET_BITS(&device_data->base->cr,
+					HASH_CR_PRIVN_MASK);
+		}
+
+		HASH_INITIALIZE;
+
+		if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
+			hash_hw_write_key(device_data, ctx->key, ctx->keylen);
+
+		/* Number of bits in last word = (nbytes * 8) % 32 */
+		HASH_SET_NBLW((req->nbytes * 8) % 32);
+		req_ctx->updated = 1;
+	}
+
+	/* Store the nents in the dma struct. */
+	ctx->device->dma.nents = hash_get_nents(req->src, req->nbytes, NULL);
+	if (!ctx->device->dma.nents) {
+		dev_err(device_data->dev, "[%s] "
+				"ctx->device->dma.nents = 0", __func__);
+		goto out;
+	}
+
+	bytes_written = hash_dma_write(ctx, req->src, req->nbytes);
+	if (bytes_written != req->nbytes) {
+		dev_err(device_data->dev, "[%s] "
+				"hash_dma_write() failed!", __func__);
+		goto out;
+	}
+
+	wait_for_completion(&ctx->device->dma.complete);
+	hash_dma_done(ctx);
+
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
+		unsigned int keylen = ctx->keylen;
+		u8 *key = ctx->key;
+
+		dev_dbg(device_data->dev, "[%s] keylen: %d", __func__,
+				ctx->keylen);
+		hash_hw_write_key(device_data, key, keylen);
+	}
+
+	hash_get_digest(device_data, digest, ctx->config.algorithm);
+	memcpy(req->result, digest, ctx->digestsize);
+
+out:
+	release_hash_device(device_data);
+
+	/**
+	 * Allocated in setkey, and only used in HMAC.
+	 */
+	kfree(ctx->key);
+
+	return ret;
+}
+
+/**
+ * hash_hw_final - The final hash calculation function
+ * @req:	The hash request for the job.
+ */
+int hash_hw_final(struct ahash_request *req)
+{
+	int ret = 0;
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+	struct hash_device_data *device_data;
+	u8 digest[SHA256_DIGEST_SIZE];
+
+	ret = hash_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	dev_dbg(device_data->dev, "[%s] (ctx=0x%x)!", __func__, (u32) ctx);
+
+	if (req_ctx->updated) {
+		ret = hash_resume_state(device_data, &device_data->state);
+
+		if (ret) {
+			dev_err(device_data->dev, "[%s] hash_resume_state() "
+					"failed!", __func__);
+			goto out;
+		}
+	} else if (req->nbytes == 0 && ctx->keylen == 0) {
+		u8 zero_hash[SHA256_DIGEST_SIZE];
+		u32 zero_hash_size = 0;
+		bool zero_digest = false;
+		/**
+		 * Use a pre-calculated empty message digest
+		 * (workaround since hw return zeroes, hw bug!?)
+		 */
+		ret = get_empty_message_digest(device_data, &zero_hash[0],
+				&zero_hash_size, &zero_digest);
+		if (!ret && likely(zero_hash_size == ctx->digestsize) &&
+				zero_digest) {
+			memcpy(req->result, &zero_hash[0], ctx->digestsize);
+			goto out;
+		} else if (!ret && !zero_digest) {
+			dev_dbg(device_data->dev, "[%s] HMAC zero msg with "
+					"key, continue...", __func__);
+		} else {
+			dev_err(device_data->dev, "[%s] ret=%d, or wrong "
+					"digest size? %s", __func__, ret,
+					(zero_hash_size == ctx->digestsize) ?
+					"true" : "false");
+			/* Return error */
+			goto out;
+		}
+	} else if (req->nbytes == 0 && ctx->keylen > 0) {
+		dev_err(device_data->dev, "[%s] Empty message with "
+				"keylength > 0, NOT supported.", __func__);
+		goto out;
+	}
+
+	if (!req_ctx->updated) {
+		ret = init_hash_hw(device_data, ctx);
+		if (ret) {
+			dev_err(device_data->dev, "[%s] init_hash_hw() "
+					"failed!", __func__);
+			goto out;
+		}
+	}
+
+	if (req_ctx->state.index) {
+		hash_messagepad(device_data, req_ctx->state.buffer,
+				req_ctx->state.index);
+	} else {
+		HASH_SET_DCAL;
+		while (device_data->base->str & HASH_STR_DCAL_MASK)
+			cpu_relax();
+	}
+
+	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
+		unsigned int keylen = ctx->keylen;
+		u8 *key = ctx->key;
+
+		dev_dbg(device_data->dev, "[%s] keylen: %d", __func__,
+				ctx->keylen);
+		hash_hw_write_key(device_data, key, keylen);
+	}
+
+	hash_get_digest(device_data, digest, ctx->config.algorithm);
+	memcpy(req->result, digest, ctx->digestsize);
+
+out:
+	release_hash_device(device_data);
+
+	/**
+	 * Allocated in setkey, and only used in HMAC.
+	 */
+	kfree(ctx->key);
+
+	return ret;
+}
+
+/**
+ * hash_hw_update - Updates current HASH computation hashing another part of
+ *                  the message.
+ * @req:	Byte array containing the message to be hashed (caller
+ *		allocated).
+ */
+int hash_hw_update(struct ahash_request *req)
+{
+	int ret = 0;
+	u8 index = 0;
+	u8 *buffer;
+	struct hash_device_data *device_data;
+	u8 *data_buffer;
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+	struct crypto_hash_walk walk;
+	int msg_length = crypto_hash_walk_first(req, &walk);
+
+	/* Empty message ("") is correct indata */
+	if (msg_length == 0)
+		return ret;
+
+	index = req_ctx->state.index;
+	buffer = (u8 *)req_ctx->state.buffer;
+
+	/* Check if ctx->state.length + msg_length
+	   overflows */
+	if (msg_length > (req_ctx->state.length.low_word + msg_length) &&
+			HASH_HIGH_WORD_MAX_VAL ==
+			req_ctx->state.length.high_word) {
+		pr_err(DEV_DBG_NAME " [%s] HASH_MSG_LENGTH_OVERFLOW!",
+				__func__);
+		return -EPERM;
+	}
+
+	ret = hash_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	/* Main loop */
+	while (0 != msg_length) {
+		data_buffer = walk.data;
+		ret = hash_process_data(device_data, ctx, req_ctx, msg_length,
+				data_buffer, buffer, &index);
+
+		if (ret) {
+			dev_err(device_data->dev, "[%s] hash_internal_hw_"
+					"update() failed!", __func__);
+			goto out;
+		}
+
+		msg_length = crypto_hash_walk_done(&walk, 0);
+	}
+
+	req_ctx->state.index = index;
+	dev_dbg(device_data->dev, "[%s] indata length=%d, bin=%d))",
+			__func__, req_ctx->state.index,
+			req_ctx->state.bit_index);
+
+out:
+	release_hash_device(device_data);
+
+	return ret;
+}
+
+/**
+ * hash_resume_state - Function that resumes the state of an calculation.
+ * @device_data:	Pointer to the device structure.
+ * @device_state:	The state to be restored in the hash hardware
+ */
+int hash_resume_state(struct hash_device_data *device_data,
+		const struct hash_state *device_state)
+{
+	u32 temp_cr;
+	s32 count;
+	int hash_mode = HASH_OPER_MODE_HASH;
+
+	if (NULL == device_state) {
+		dev_err(device_data->dev, "[%s] HASH_INVALID_PARAMETER!",
+				__func__);
+		return -EPERM;
+	}
+
+	/* Check correctness of index and length members */
+	if (device_state->index > HASH_BLOCK_SIZE
+	    || (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) {
+		dev_err(device_data->dev, "[%s] HASH_INVALID_PARAMETER!",
+				__func__);
+		return -EPERM;
+	}
+
+	/*
+	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
+	 * prepare the initialize the HASH accelerator to compute the message
+	 * digest of a new message.
+	 */
+	HASH_INITIALIZE;
+
+	temp_cr = device_state->temp_cr;
+	writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr);
+
+	if (device_data->base->cr & HASH_CR_MODE_MASK)
+		hash_mode = HASH_OPER_MODE_HMAC;
+	else
+		hash_mode = HASH_OPER_MODE_HASH;
+
+	for (count = 0; count < HASH_CSR_COUNT; count++) {
+		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
+			break;
+
+		writel_relaxed(device_state->csr[count],
+				&device_data->base->csrx[count]);
+	}
+
+	writel_relaxed(device_state->csfull, &device_data->base->csfull);
+	writel_relaxed(device_state->csdatain, &device_data->base->csdatain);
+
+	writel_relaxed(device_state->str_reg, &device_data->base->str);
+	writel_relaxed(temp_cr, &device_data->base->cr);
+
+	return 0;
+}
+
+/**
+ * hash_save_state - Function that saves the state of hardware.
+ * @device_data:	Pointer to the device structure.
+ * @device_state:	The strucure where the hardware state should be saved.
+ */
+int hash_save_state(struct hash_device_data *device_data,
+		struct hash_state *device_state)
+{
+	u32 temp_cr;
+	u32 count;
+	int hash_mode = HASH_OPER_MODE_HASH;
+
+	if (NULL == device_state) {
+		dev_err(device_data->dev, "[%s] HASH_INVALID_PARAMETER!",
+				__func__);
+		return -ENOTSUPP;
+	}
+
+	/* Write dummy value to force digest intermediate calculation. This
+	 * actually makes sure that there isn't any ongoing calculation in the
+	 * hardware.
+	 */
+	while (device_data->base->str & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	temp_cr = readl_relaxed(&device_data->base->cr);
+
+	device_state->str_reg = readl_relaxed(&device_data->base->str);
+
+	device_state->din_reg = readl_relaxed(&device_data->base->din);
+
+	if (device_data->base->cr & HASH_CR_MODE_MASK)
+		hash_mode = HASH_OPER_MODE_HMAC;
+	else
+		hash_mode = HASH_OPER_MODE_HASH;
+
+	for (count = 0; count < HASH_CSR_COUNT; count++) {
+		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
+			break;
+
+		device_state->csr[count] =
+			readl_relaxed(&device_data->base->csrx[count]);
+	}
+
+	device_state->csfull = readl_relaxed(&device_data->base->csfull);
+	device_state->csdatain = readl_relaxed(&device_data->base->csdatain);
+
+	device_state->temp_cr = temp_cr;
+
+	return 0;
+}
+
+/**
+ * hash_check_hw - This routine checks for peripheral Ids and PCell Ids.
+ * @device_data:
+ *
+ */
+int hash_check_hw(struct hash_device_data *device_data)
+{
+	/* Checking Peripheral Ids  */
+	if (HASH_P_ID0 == readl_relaxed(&device_data->base->periphid0)
+		&& HASH_P_ID1 == readl_relaxed(&device_data->base->periphid1)
+		&& HASH_P_ID2 == readl_relaxed(&device_data->base->periphid2)
+		&& HASH_P_ID3 == readl_relaxed(&device_data->base->periphid3)
+		&& HASH_CELL_ID0 == readl_relaxed(&device_data->base->cellid0)
+		&& HASH_CELL_ID1 == readl_relaxed(&device_data->base->cellid1)
+		&& HASH_CELL_ID2 == readl_relaxed(&device_data->base->cellid2)
+		&& HASH_CELL_ID3 == readl_relaxed(&device_data->base->cellid3)
+	   ) {
+		return 0;
+	}
+
+	dev_err(device_data->dev, "[%s] HASH_UNSUPPORTED_HW!",
+			__func__);
+	return -ENOTSUPP;
+}
+
+/**
+ * hash_get_digest - Gets the digest.
+ * @device_data:	Pointer to the device structure.
+ * @digest:		User allocated byte array for the calculated digest.
+ * @algorithm:		The algorithm in use.
+ */
+void hash_get_digest(struct hash_device_data *device_data,
+		u8 *digest, int algorithm)
+{
+	u32 temp_hx_val, count;
+	int loop_ctr;
+
+	if (algorithm != HASH_ALGO_SHA1 && algorithm != HASH_ALGO_SHA256) {
+		dev_err(device_data->dev, "[%s] Incorrect algorithm %d",
+				__func__, algorithm);
+		return;
+	}
+
+	if (algorithm == HASH_ALGO_SHA1)
+		loop_ctr = SHA1_DIGEST_SIZE / sizeof(u32);
+	else
+		loop_ctr = SHA256_DIGEST_SIZE / sizeof(u32);
+
+	dev_dbg(device_data->dev, "[%s] digest array:(0x%x)",
+			__func__, (u32) digest);
+
+	/* Copy result into digest array */
+	for (count = 0; count < loop_ctr; count++) {
+		temp_hx_val = readl_relaxed(&device_data->base->hx[count]);
+		digest[count * 4] = (u8) ((temp_hx_val >> 24) & 0xFF);
+		digest[count * 4 + 1] = (u8) ((temp_hx_val >> 16) & 0xFF);
+		digest[count * 4 + 2] = (u8) ((temp_hx_val >> 8) & 0xFF);
+		digest[count * 4 + 3] = (u8) ((temp_hx_val >> 0) & 0xFF);
+	}
+}
+
+/**
+ * hash_update - The hash update function for SHA1/SHA2 (SHA256).
+ * @req: The hash request for the job.
+ */
+static int ahash_update(struct ahash_request *req)
+{
+	int ret = 0;
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+
+	if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode)
+		ret = hash_hw_update(req);
+	/* Skip update for DMA, all data will be passed to DMA in final */
+
+	if (ret) {
+		pr_err(DEV_DBG_NAME " [%s] hash_hw_update() failed!",
+				__func__);
+	}
+
+	return ret;
+}
+
+/**
+ * hash_final - The hash final function for SHA1/SHA2 (SHA256).
+ * @req:	The hash request for the job.
+ */
+static int ahash_final(struct ahash_request *req)
+{
+	int ret = 0;
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+
+	pr_debug(DEV_DBG_NAME " [%s] data size: %d", __func__, req->nbytes);
+
+	if ((hash_mode == HASH_MODE_DMA) && req_ctx->dma_mode)
+		ret = hash_dma_final(req);
+	else
+		ret = hash_hw_final(req);
+
+	if (ret) {
+		pr_err(DEV_DBG_NAME " [%s] hash_hw/dma_final() failed",
+				__func__);
+	}
+
+	return ret;
+}
+
+static int hash_setkey(struct crypto_ahash *tfm,
+		const u8 *key, unsigned int keylen, int alg)
+{
+	int ret = 0;
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	/**
+	 * Freed in final.
+	 */
+	ctx->key = kmalloc(keylen, GFP_KERNEL);
+	if (!ctx->key) {
+		pr_err(DEV_DBG_NAME " [%s] Failed to allocate ctx->key "
+		       "for %d\n", __func__, alg);
+		return -ENOMEM;
+	}
+
+	memcpy(ctx->key, key, keylen);
+	ctx->keylen = keylen;
+
+	return ret;
+}
+
+static int ahash_sha1_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format = HASH_DATA_8_BITS;
+	ctx->config.algorithm = HASH_ALGO_SHA1;
+	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
+	ctx->digestsize = SHA1_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int ahash_sha256_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format = HASH_DATA_8_BITS;
+	ctx->config.algorithm = HASH_ALGO_SHA256;
+	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
+	ctx->digestsize = SHA256_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int ahash_sha1_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = ahash_sha1_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int ahash_sha256_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = ahash_sha256_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int hmac_sha1_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format	= HASH_DATA_8_BITS;
+	ctx->config.algorithm	= HASH_ALGO_SHA1;
+	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
+	ctx->digestsize		= SHA1_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int hmac_sha256_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format	= HASH_DATA_8_BITS;
+	ctx->config.algorithm	= HASH_ALGO_SHA256;
+	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
+	ctx->digestsize		= SHA256_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int hmac_sha1_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = hmac_sha1_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int hmac_sha256_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = hmac_sha256_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int hmac_sha1_setkey(struct crypto_ahash *tfm,
+		const u8 *key, unsigned int keylen)
+{
+	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA1);
+}
+
+static int hmac_sha256_setkey(struct crypto_ahash *tfm,
+		const u8 *key, unsigned int keylen)
+{
+	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA256);
+}
+
+struct hash_algo_template {
+	struct hash_config conf;
+	struct ahash_alg hash;
+};
+
+static int hash_cra_init(struct crypto_tfm *tfm)
+{
+	struct hash_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_alg *alg = tfm->__crt_alg;
+	struct hash_algo_template *hash_alg;
+
+	hash_alg = container_of(__crypto_ahash_alg(alg),
+			struct hash_algo_template,
+			hash);
+
+	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+			sizeof(struct hash_req_ctx));
+
+	ctx->config.data_format = HASH_DATA_8_BITS;
+	ctx->config.algorithm = hash_alg->conf.algorithm;
+	ctx->config.oper_mode = hash_alg->conf.oper_mode;
+
+	ctx->digestsize = hash_alg->hash.halg.digestsize;
+
+	return 0;
+}
+
+static struct hash_algo_template hash_algs[] = {
+	{
+			.conf.algorithm	= HASH_ALGO_SHA1,
+			.conf.oper_mode	= HASH_OPER_MODE_HASH,
+			.hash = {
+				.init = hash_init,
+				.update = ahash_update,
+				.final = ahash_final,
+				.digest = ahash_sha1_digest,
+				.halg.digestsize = SHA1_DIGEST_SIZE,
+				.halg.statesize = sizeof(struct hash_ctx),
+				.halg.base = {
+					.cra_name = "sha1",
+					.cra_driver_name = "sha1-ux500",
+					.cra_flags = CRYPTO_ALG_TYPE_AHASH |
+							CRYPTO_ALG_ASYNC,
+					.cra_blocksize = SHA1_BLOCK_SIZE,
+					.cra_ctxsize = sizeof(struct hash_ctx),
+					.cra_init = hash_cra_init,
+					.cra_module = THIS_MODULE,
+			}
+		}
+	},
+	{
+			.conf.algorithm		= HASH_ALGO_SHA256,
+			.conf.oper_mode		= HASH_OPER_MODE_HASH,
+			.hash = {
+				.init = hash_init,
+				.update	= ahash_update,
+				.final = ahash_final,
+				.digest = ahash_sha256_digest,
+				.halg.digestsize = SHA256_DIGEST_SIZE,
+				.halg.statesize = sizeof(struct hash_ctx),
+				.halg.base = {
+					.cra_name = "sha256",
+					.cra_driver_name = "sha256-ux500",
+					.cra_flags = CRYPTO_ALG_TYPE_AHASH |
+							CRYPTO_ALG_ASYNC,
+					.cra_blocksize = SHA256_BLOCK_SIZE,
+					.cra_ctxsize = sizeof(struct hash_ctx),
+					.cra_type = &crypto_ahash_type,
+					.cra_init = hash_cra_init,
+					.cra_module = THIS_MODULE,
+				}
+			}
+
+	},
+	{
+			.conf.algorithm		= HASH_ALGO_SHA1,
+			.conf.oper_mode		= HASH_OPER_MODE_HMAC,
+			.hash = {
+				.init = hash_init,
+				.update = ahash_update,
+				.final = ahash_final,
+				.digest = hmac_sha1_digest,
+				.setkey = hmac_sha1_setkey,
+				.halg.digestsize = SHA1_DIGEST_SIZE,
+				.halg.statesize = sizeof(struct hash_ctx),
+				.halg.base = {
+					.cra_name = "hmac(sha1)",
+					.cra_driver_name = "hmac-sha1-ux500",
+					.cra_flags = CRYPTO_ALG_TYPE_AHASH |
+							CRYPTO_ALG_ASYNC,
+					.cra_blocksize = SHA1_BLOCK_SIZE,
+					.cra_ctxsize = sizeof(struct hash_ctx),
+					.cra_type = &crypto_ahash_type,
+					.cra_init = hash_cra_init,
+					.cra_module = THIS_MODULE,
+				}
+			}
+	},
+	{
+			.conf.algorithm		= HASH_ALGO_SHA256,
+			.conf.oper_mode		= HASH_OPER_MODE_HMAC,
+			.hash = {
+				.init = hash_init,
+				.update = ahash_update,
+				.final = ahash_final,
+				.digest = hmac_sha256_digest,
+				.setkey = hmac_sha256_setkey,
+				.halg.digestsize = SHA256_DIGEST_SIZE,
+				.halg.statesize = sizeof(struct hash_ctx),
+				.halg.base = {
+					.cra_name = "hmac(sha256)",
+					.cra_driver_name = "hmac-sha256-ux500",
+					.cra_flags = CRYPTO_ALG_TYPE_AHASH |
+							CRYPTO_ALG_ASYNC,
+					.cra_blocksize = SHA256_BLOCK_SIZE,
+					.cra_ctxsize = sizeof(struct hash_ctx),
+					.cra_type = &crypto_ahash_type,
+					.cra_init = hash_cra_init,
+					.cra_module = THIS_MODULE,
+				}
+			}
+	}
+};
+
+/**
+ * hash_algs_register_all -
+ */
+static int ahash_algs_register_all(struct hash_device_data *device_data)
+{
+	int ret;
+	int i;
+	int count;
+
+	for (i = 0; i < ARRAY_SIZE(hash_algs); i++) {
+		ret = crypto_register_ahash(&hash_algs[i].hash);
+		if (ret) {
+			count = i;
+			dev_err(device_data->dev, "[%s] alg registration failed",
+				hash_algs[i].hash.halg.base.cra_driver_name);
+			goto unreg;
+		}
+	}
+	return 0;
+unreg:
+	for (i = 0; i < count; i++)
+		crypto_unregister_ahash(&hash_algs[i].hash);
+	return ret;
+}
+
+/**
+ * hash_algs_unregister_all -
+ */
+static void ahash_algs_unregister_all(struct hash_device_data *device_data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hash_algs); i++)
+		crypto_unregister_ahash(&hash_algs[i].hash);
+}
+
+/**
+ * ux500_hash_probe - Function that probes the hash hardware.
+ * @pdev: The platform device.
+ */
+static int ux500_hash_probe(struct platform_device *pdev)
+{
+	int			ret = 0;
+	struct resource		*res = NULL;
+	struct hash_device_data *device_data;
+	struct device		*dev = &pdev->dev;
+
+	device_data = kzalloc(sizeof(struct hash_device_data), GFP_ATOMIC);
+	if (!device_data) {
+		dev_dbg(dev, "[%s] kzalloc() failed!", __func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	device_data->dev = dev;
+	device_data->current_ctx = NULL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_dbg(dev, "[%s] platform_get_resource() failed!", __func__);
+		ret = -ENODEV;
+		goto out_kfree;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL) {
+		dev_dbg(dev, "[%s] request_mem_region() failed!", __func__);
+		ret = -EBUSY;
+		goto out_kfree;
+	}
+
+	device_data->base = ioremap(res->start, resource_size(res));
+	if (!device_data->base) {
+		dev_err(dev, "[%s] ioremap() failed!",
+				__func__);
+		ret = -ENOMEM;
+		goto out_free_mem;
+	}
+	spin_lock_init(&device_data->ctx_lock);
+	spin_lock_init(&device_data->power_state_lock);
+
+	/* Enable power for HASH1 hardware block */
+	device_data->regulator = regulator_get(dev, "v-ape");
+	if (IS_ERR(device_data->regulator)) {
+		dev_err(dev, "[%s] regulator_get() failed!", __func__);
+		ret = PTR_ERR(device_data->regulator);
+		device_data->regulator = NULL;
+		goto out_unmap;
+	}
+
+	/* Enable the clock for HASH1 hardware block */
+	device_data->clk = clk_get(dev, NULL);
+	if (IS_ERR(device_data->clk)) {
+		dev_err(dev, "[%s] clk_get() failed!", __func__);
+		ret = PTR_ERR(device_data->clk);
+		goto out_regulator;
+	}
+
+	/* Enable device power (and clock) */
+	ret = hash_enable_power(device_data, false);
+	if (ret) {
+		dev_err(dev, "[%s]: hash_enable_power() failed!", __func__);
+		goto out_clk;
+	}
+
+	ret = hash_check_hw(device_data);
+	if (ret) {
+		dev_err(dev, "[%s] hash_check_hw() failed!", __func__);
+		goto out_power;
+	}
+
+	if (hash_mode == HASH_MODE_DMA)
+		hash_dma_setup_channel(device_data, dev);
+
+	platform_set_drvdata(pdev, device_data);
+
+	/* Put the new device into the device list... */
+	klist_add_tail(&device_data->list_node, &driver_data.device_list);
+	/* ... and signal that a new device is available. */
+	up(&driver_data.device_allocation);
+
+	ret = ahash_algs_register_all(device_data);
+	if (ret) {
+		dev_err(dev, "[%s] ahash_algs_register_all() "
+				"failed!", __func__);
+		goto out_power;
+	}
+
+	dev_info(dev, "[%s] successfully probed\n", __func__);
+	return 0;
+
+out_power:
+	hash_disable_power(device_data, false);
+
+out_clk:
+	clk_put(device_data->clk);
+
+out_regulator:
+	regulator_put(device_data->regulator);
+
+out_unmap:
+	iounmap(device_data->base);
+
+out_free_mem:
+	release_mem_region(res->start, resource_size(res));
+
+out_kfree:
+	kfree(device_data);
+out:
+	return ret;
+}
+
+/**
+ * ux500_hash_remove - Function that removes the hash device from the platform.
+ * @pdev: The platform device.
+ */
+static int ux500_hash_remove(struct platform_device *pdev)
+{
+	struct resource		*res;
+	struct hash_device_data *device_data;
+	struct device		*dev = &pdev->dev;
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(dev, "[%s]: platform_get_drvdata() failed!",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* Try to decrease the number of available devices. */
+	if (down_trylock(&driver_data.device_allocation))
+		return -EBUSY;
+
+	/* Check that the device is free */
+	spin_lock(&device_data->ctx_lock);
+	/* current_ctx allocates a device, NULL = unallocated */
+	if (device_data->current_ctx) {
+		/* The device is busy */
+		spin_unlock(&device_data->ctx_lock);
+		/* Return the device to the pool. */
+		up(&driver_data.device_allocation);
+		return -EBUSY;
+	}
+
+	spin_unlock(&device_data->ctx_lock);
+
+	/* Remove the device from the list */
+	if (klist_node_attached(&device_data->list_node))
+		klist_remove(&device_data->list_node);
+
+	/* If this was the last device, remove the services */
+	if (list_empty(&driver_data.device_list.k_list))
+		ahash_algs_unregister_all(device_data);
+
+	if (hash_disable_power(device_data, false))
+		dev_err(dev, "[%s]: hash_disable_power() failed",
+			__func__);
+
+	clk_put(device_data->clk);
+	regulator_put(device_data->regulator);
+
+	iounmap(device_data->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
+
+	kfree(device_data);
+
+	return 0;
+}
+
+/**
+ * ux500_hash_shutdown - Function that shutdown the hash device.
+ * @pdev: The platform device
+ */
+static void ux500_hash_shutdown(struct platform_device *pdev)
+{
+	struct resource *res = NULL;
+	struct hash_device_data *device_data;
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(&pdev->dev, "[%s] platform_get_drvdata() failed!",
+				__func__);
+		return;
+	}
+
+	/* Check that the device is free */
+	spin_lock(&device_data->ctx_lock);
+	/* current_ctx allocates a device, NULL = unallocated */
+	if (!device_data->current_ctx) {
+		if (down_trylock(&driver_data.device_allocation))
+			dev_dbg(&pdev->dev, "[%s]: Cryp still in use!"
+				"Shutting down anyway...", __func__);
+		/**
+		 * (Allocate the device)
+		 * Need to set this to non-null (dummy) value,
+		 * to avoid usage if context switching.
+		 */
+		device_data->current_ctx++;
+	}
+	spin_unlock(&device_data->ctx_lock);
+
+	/* Remove the device from the list */
+	if (klist_node_attached(&device_data->list_node))
+		klist_remove(&device_data->list_node);
+
+	/* If this was the last device, remove the services */
+	if (list_empty(&driver_data.device_list.k_list))
+		ahash_algs_unregister_all(device_data);
+
+	iounmap(device_data->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
+
+	if (hash_disable_power(device_data, false))
+		dev_err(&pdev->dev, "[%s] hash_disable_power() failed",
+				__func__);
+}
+
+/**
+ * ux500_hash_suspend - Function that suspends the hash device.
+ * @pdev:	The platform device.
+ * @state:	-
+ */
+static int ux500_hash_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret;
+	struct hash_device_data *device_data;
+	struct hash_ctx *temp_ctx = NULL;
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(&pdev->dev, "[%s] platform_get_drvdata() failed!",
+				__func__);
+		return -ENOMEM;
+	}
+
+	spin_lock(&device_data->ctx_lock);
+	if (!device_data->current_ctx)
+		device_data->current_ctx++;
+	spin_unlock(&device_data->ctx_lock);
+
+	if (device_data->current_ctx == ++temp_ctx) {
+		if (down_interruptible(&driver_data.device_allocation))
+			dev_dbg(&pdev->dev, "[%s]: down_interruptible() "
+					"failed", __func__);
+		ret = hash_disable_power(device_data, false);
+
+	} else
+		ret = hash_disable_power(device_data, true);
+
+	if (ret)
+		dev_err(&pdev->dev, "[%s]: hash_disable_power()", __func__);
+
+	return ret;
+}
+
+/**
+ * ux500_hash_resume - Function that resume the hash device.
+ * @pdev:	The platform device.
+ */
+static int ux500_hash_resume(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct hash_device_data *device_data;
+	struct hash_ctx *temp_ctx = NULL;
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(&pdev->dev, "[%s] platform_get_drvdata() failed!",
+				__func__);
+		return -ENOMEM;
+	}
+
+	spin_lock(&device_data->ctx_lock);
+	if (device_data->current_ctx == ++temp_ctx)
+		device_data->current_ctx = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+	if (!device_data->current_ctx)
+		up(&driver_data.device_allocation);
+	else
+		ret = hash_enable_power(device_data, true);
+
+	if (ret)
+		dev_err(&pdev->dev, "[%s]: hash_enable_power() failed!",
+			__func__);
+
+	return ret;
+}
+
+static struct platform_driver hash_driver = {
+	.probe  = ux500_hash_probe,
+	.remove = ux500_hash_remove,
+	.shutdown = ux500_hash_shutdown,
+	.suspend  = ux500_hash_suspend,
+	.resume   = ux500_hash_resume,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name  = "hash1",
+	}
+};
+
+/**
+ * ux500_hash_mod_init - The kernel module init function.
+ */
+static int __init ux500_hash_mod_init(void)
+{
+	klist_init(&driver_data.device_list, NULL, NULL);
+	/* Initialize the semaphore to 0 devices (locked state) */
+	sema_init(&driver_data.device_allocation, 0);
+
+	return platform_driver_register(&hash_driver);
+}
+
+/**
+ * ux500_hash_mod_fini - The kernel module exit function.
+ */
+static void __exit ux500_hash_mod_fini(void)
+{
+	platform_driver_unregister(&hash_driver);
+	return;
+}
+
+module_init(ux500_hash_mod_init);
+module_exit(ux500_hash_mod_fini);
+
+MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("sha1-all");
+MODULE_ALIAS("sha256-all");
+MODULE_ALIAS("hmac-sha1-all");
+MODULE_ALIAS("hmac-sha256-all");