Commit 8a745003 authored by Christophe RICARD's avatar Christophe RICARD Committed by Jarkko Sakkinen

tpm/st33zp24/spi: Use functions name with st33zp24_spi_ prefix

Make sure every function name use st33zp24_spi_ prefix.
Signed-off-by: default avatarChristophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
parent 604e5788
......@@ -145,7 +145,7 @@ static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
} /* st33zp24_spi_send() */
/*
* read8_recv
* st33zp24_spi_read8_recv
* Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
* @param: phy_id, the phy description
* @param: tpm_register, the tpm tis register where the data should be read
......@@ -153,7 +153,8 @@ static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
* @param: tpm_size, tpm TPM response size to read.
* @return: should be zero if success else a negative error code.
*/
static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
static int st33zp24_spi_read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data,
int tpm_size)
{
u8 data = 0;
int total_length = 0, ret;
......@@ -185,7 +186,7 @@ static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
}
return ret;
} /* read8_reg() */
} /* st33zp24_spi_read8_reg() */
/*
* st33zp24_spi_recv
......@@ -201,13 +202,13 @@ static int st33zp24_spi_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
{
int ret;
ret = read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
ret = st33zp24_spi_read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
if (!st33zp24_status_to_errno(ret))
return tpm_size;
return ret;
} /* st33zp24_spi_recv() */
static int evaluate_latency(void *phy_id)
static int st33zp24_spi_evaluate_latency(void *phy_id)
{
struct st33zp24_spi_phy *phy = phy_id;
int latency = 1, status = 0;
......@@ -215,7 +216,8 @@ static int evaluate_latency(void *phy_id)
while (!status && latency < MAX_SPI_LATENCY) {
phy->latency = latency;
status = read8_reg(phy_id, TPM_INTF_CAPABILITY, &data, 1);
status = st33zp24_spi_read8_reg(phy_id, TPM_INTF_CAPABILITY,
&data, 1);
latency++;
}
return latency - 1;
......@@ -227,7 +229,7 @@ static const struct st33zp24_phy_ops spi_phy_ops = {
};
#ifdef CONFIG_OF
static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
static int st33zp24_spi_of_request_resources(struct st33zp24_spi_phy *phy)
{
struct device_node *pp;
struct spi_device *dev = phy->spi_device;
......@@ -265,14 +267,14 @@ static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
return 0;
}
#else
static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
static int st33zp24_spi_of_request_resources(struct st33zp24_spi_phy *phy)
{
return -ENODEV;
}
#endif
static int tpm_stm_spi_request_resources(struct spi_device *dev,
struct st33zp24_spi_phy *phy)
static int st33zp24_spi_request_resources(struct spi_device *dev,
struct st33zp24_spi_phy *phy)
{
struct st33zp24_platform_data *pdata;
int ret;
......@@ -301,13 +303,12 @@ static int tpm_stm_spi_request_resources(struct spi_device *dev,
}
/*
* tpm_st33_spi_probe initialize the TPM device
* st33zp24_spi_probe initialize the TPM device
* @param: dev, the spi_device drescription (TPM SPI description).
* @return: 0 in case of success.
* or a negative value describing the error.
*/
static int
tpm_st33_spi_probe(struct spi_device *dev)
static int st33zp24_spi_probe(struct spi_device *dev)
{
int ret;
struct st33zp24_platform_data *pdata;
......@@ -328,11 +329,11 @@ tpm_st33_spi_probe(struct spi_device *dev)
phy->spi_device = dev;
pdata = dev->dev.platform_data;
if (!pdata && dev->dev.of_node) {
ret = tpm_stm_spi_of_request_resources(phy);
ret = st33zp24_spi_of_request_resources(phy);
if (ret)
return ret;
} else if (pdata) {
ret = tpm_stm_spi_request_resources(dev, phy);
ret = st33zp24_spi_request_resources(dev, phy);
if (ret)
return ret;
}
......@@ -340,7 +341,7 @@ tpm_st33_spi_probe(struct spi_device *dev)
phy->spi_xfer.tx_buf = phy->tx_buf;
phy->spi_xfer.rx_buf = phy->rx_buf;
phy->latency = evaluate_latency(phy);
phy->latency = st33zp24_spi_evaluate_latency(phy);
if (phy->latency <= 0)
return -ENODEV;
......@@ -349,11 +350,11 @@ tpm_st33_spi_probe(struct spi_device *dev)
}
/*
* tpm_st33_spi_remove remove the TPM device
* st33zp24_spi_remove remove the TPM device
* @param: client, the spi_device drescription (TPM SPI description).
* @return: 0 in case of success.
*/
static int tpm_st33_spi_remove(struct spi_device *dev)
static int st33zp24_spi_remove(struct spi_device *dev)
{
struct tpm_chip *chip = spi_get_drvdata(dev);
......@@ -377,18 +378,18 @@ MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match);
static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend,
st33zp24_pm_resume);
static struct spi_driver tpm_st33_spi_driver = {
static struct spi_driver st33zp24_spi_driver = {
.driver = {
.name = TPM_ST33_SPI,
.pm = &st33zp24_spi_ops,
.of_match_table = of_match_ptr(of_st33zp24_spi_match),
},
.probe = tpm_st33_spi_probe,
.remove = tpm_st33_spi_remove,
.probe = st33zp24_spi_probe,
.remove = st33zp24_spi_remove,
.id_table = st33zp24_spi_id,
};
module_spi_driver(tpm_st33_spi_driver);
module_spi_driver(st33zp24_spi_driver);
MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)");
MODULE_DESCRIPTION("STM TPM 1.2 SPI ST33 Driver");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment