Merge tag 'amlogic-dt' of...

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.4

Highlights
- odroid-c1: use MAC address from efuse
- add VDD_EE regulator to several boards

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse
  ARM: dts: meson8b: mxq: add the VDDEE regulator
  ARM: dts: meson8b: odroidc1: add the VDDEE regulator
  ARM: dts: meson8b: ec100: add the VDDEE regulator
  ARM: dts: meson8b: add the PWM_D output pin
  ARM: dts: meson8b: add ethernet fifo sizes

Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/meson8b-ec100.dts

@@ -219,6 +219,27 @@ vcc_rtc: regulator-vcc-rtc {
 		 */
 		vin-supply = <&vcc_3v3>;
 	};
+
+	vddee: regulator-vddee {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called VDDAO
+		 * in a part of the schematics.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		vin-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &cpu0 {
@@ -269,6 +290,10 @@ rt5640: codec@1c {
 	};
 };
 
+&mali {
+	mali-supply = <&vddee>;
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vcc_1v8>;
@@ -350,10 +375,10 @@ &gpio {
 
 &pwm_cd {
 	status = "okay";
-	pinctrl-0 = <&pwm_c1_pins>;
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>;
-	clock-names = "clkin0";
+	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {

arch/arm/boot/dts/meson8b-mxq.dts

@@ -76,6 +76,22 @@ vcc_5v: regulator-vcc5v {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vddee: regulator-vddee {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		vin-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &cpu0 {
@@ -112,6 +128,10 @@ eth_phy0: ethernet-phy@0 {
 	};
 };
 
+&mali {
+	mali-supply = <&vddee>;
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vcc_1v8>;
@@ -143,10 +163,10 @@ sd_card_slot: slot@1 {
 
 &pwm_cd {
 	status = "okay";
-	pinctrl-0 = <&pwm_c1_pins>;
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>;
-	clock-names = "clkin0";
+	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clock-names = "clkin0", "clkin1";
 };
 
 &uart_AO {

arch/arm/boot/dts/meson8b-odroidc1.dts

@@ -154,6 +154,23 @@ vddc_ddr: regulator-vddc-ddr {
 		vin-supply = <&p5v0>;
 	};
 
+	vddee: regulator-vddee {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		vin-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 1 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vdd_rtc: regulator-vdd-rtc {
 		/*
 		 * Torex Semiconductor XC6215 configured for a fixed output of
@@ -173,6 +190,12 @@ &cpu0 {
 	cpu-supply = <&vcck>;
 };
 
+&efuse {
+	ethernet_mac_address: mac@1b4 {
+		reg = <0x1b4 0x6>;
+	};
+};
+
 &ethmac {
 	status = "okay";
 
@@ -183,6 +206,9 @@ &ethmac {
 	phy-handle = <&eth_phy>;
 	amlogic,tx-delay-ns = <4>;
 
+	nvmem-cells = <&ethernet_mac_address>;
+	nvmem-cell-names = "mac-address";
+
 	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
@@ -276,6 +302,10 @@ &ir_receiver {
 	pinctrl-names = "default";
 };
 
+&mali {
+	mali-supply = <&vddee>;
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vcc_1v8>;
@@ -308,10 +338,10 @@ sd_card_slot: slot@1 {
 
 &pwm_cd {
 	status = "okay";
-	pinctrl-0 = <&pwm_c1_pins>;
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>;
-	clock-names = "clkin0";
+	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {

arch/arm/boot/dts/meson8b.dtsi

@@ -361,6 +361,14 @@ mux {
 			};
 		};
 
+		pwm_d_pins: pwm-d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
 		uart_b0_pins: uart-b0 {
 			mux {
 				groups = "uart_tx_b0",
@@ -410,6 +418,8 @@ &ethmac {
 		 <&clkc CLKID_MPLL2>,
 		 <&clkc CLKID_MPLL2>;
 	clock-names = "stmmaceth", "clkin0", "clkin1";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
 
 	resets = <&reset RESET_ETHERNET>;
 	reset-names = "stmmaceth";