Commit 8af53d35 authored by Gerd Knorr's avatar Gerd Knorr Committed by Linus Torvalds

[PATCH] media/video i2c updates

This updates a bunch of i2c modules in drivers/media/video.  Most of it
are adaptions to the recent i2c changes in the kernel.  While being at
it I also did some other cleanups like deleting unused+dead code, using
name-based initialization for some not-yet converted structs, ...

The also has a few small fixes here and there, but no major functional
changes.
parent 16793fc5
......@@ -30,44 +30,6 @@
* make sense in v4l context only. So I think that's acceptable...
*/
#if 0
/* TODO (if it is ever [to be] accessible in the V4L[2] spec):
* maybe fade? (back/front)
* notes:
* NEWCHANNEL and SWITCH_MUTE are here because the MSP3400 has a special
* routine to go through when it tunes in to a new channel before turning
* back on the sound.
* Either SET_RADIO, NEWCHANNEL, and SWITCH_MUTE or SET_INPUT need to be
* implemented (MSP3400 uses SET_RADIO to select inputs, and SWITCH_MUTE for
* channel-change mute -- TEA6300 et al use SET_AUDIO to select input [TV,
* radio, external, or MUTE]). If both methods are implemented, you get a
* cookie for doing such a good job! :)
*/
#define AUDC_SET_TVNORM _IOW('m',1,int) /* TV mode + PAL/SECAM/NTSC */
#define AUDC_NEWCHANNEL _IO('m',3) /* indicate new chan - off mute */
#define AUDC_GET_VOLUME_LEFT _IOR('m',4,__u16)
#define AUDC_GET_VOLUME_RIGHT _IOR('m',5,__u16)
#define AUDC_SET_VOLUME_LEFT _IOW('m',6,__u16)
#define AUDC_SET_VOLUME_RIGHT _IOW('m',7,__u16)
#define AUDC_GET_STEREO _IOR('m',8,__u16)
#define AUDC_SET_STEREO _IOW('m',9,__u16)
#define AUDC_GET_DC _IOR('m',10,__u16)/* ??? */
#define AUDC_GET_BASS _IOR('m',11,__u16)
#define AUDC_SET_BASS _IOW('m',12,__u16)
#define AUDC_GET_TREBLE _IOR('m',13,__u16)
#define AUDC_SET_TREBLE _IOW('m',14,__u16)
#define AUDC_GET_UNIT _IOR('m',15,int) /* ??? - unimplemented in MSP3400 */
#define AUDC_SWITCH_MUTE _IO('m',16) /* turn on mute */
#endif
/* misc stuff to pass around config info to i2c chips */
#define AUDC_CONFIG_PINNACLE _IOW('m',32,int)
......
......@@ -62,17 +62,7 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = {I2C_CLIENT_END};
static unsigned short normal_i2c_range[] = {0x40,0x40,I2C_CLIENT_END};
static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short force[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
normal_i2c, normal_i2c_range,
probe, probe_range,
ignore, ignore_range,
force
};
I2C_CLIENT_INSMOD;
/* insmod parameters */
static int debug = 0; /* debug output */
......@@ -145,17 +135,33 @@ MODULE_LICENSE("GPL");
/* ----------------------------------------------------------------------- */
/* functions for talking to the MSP3400C Sound processor */
#ifndef I2C_M_IGNORE_NAK
# define I2C_M_IGNORE_NAK 0x1000
#endif
static int msp3400c_reset(struct i2c_client *client)
{
static char reset_off[3] = { 0x00, 0x80, 0x00 };
static char reset_on[3] = { 0x00, 0x00, 0x00 };
i2c_master_send(client,reset_off,3); /* XXX ignore errors here */
if (3 != i2c_master_send(client,reset_on, 3)) {
printk(KERN_ERR "msp3400: chip reset failed, penguin on i2c bus?\n");
return -1;
}
return 0;
/* reset and read revision code */
static char reset_off[3] = { 0x00, 0x80, 0x00 };
static char reset_on[3] = { 0x00, 0x00, 0x00 };
static char write[3] = { I2C_MSP3400C_DFP + 1, 0x00, 0x1e };
char read[2];
struct i2c_msg reset[2] = {
{ client->addr, I2C_M_IGNORE_NAK, 3, reset_off },
{ client->addr, I2C_M_IGNORE_NAK, 3, reset_on },
};
struct i2c_msg test[2] = {
{ client->addr, 0, 3, write },
{ client->addr, I2C_M_RD, 2, read },
};
if ( (1 != i2c_transfer(client->adapter,&reset[0],1)) ||
(1 != i2c_transfer(client->adapter,&reset[1],1)) ||
(2 != i2c_transfer(client->adapter,test,2)) ) {
printk(KERN_ERR "msp3400: chip reset failed\n");
return -1;
}
return 0;
}
static int
......@@ -1213,19 +1219,20 @@ static int msp_probe(struct i2c_adapter *adap);
static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg);
static struct i2c_driver driver = {
.name = "i2cmsp3400driver",
.id = I2C_DRIVERID_MSP3400,
.flags = I2C_DF_NOTIFY,
.attach_adapter = msp_probe,
.detach_client = msp_detach,
.command = msp_command,
.owner = THIS_MODULE,
.name = "i2c msp3400 driver",
.id = I2C_DRIVERID_MSP3400,
.flags = I2C_DF_NOTIFY,
.attach_adapter = msp_probe,
.detach_client = msp_detach,
.command = msp_command,
};
static struct i2c_client client_template =
{
.name = "(unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
.name = "(unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
static int msp_attach(struct i2c_adapter *adap, int addr,
......@@ -1258,6 +1265,7 @@ static int msp_attach(struct i2c_adapter *adap, int addr,
msp->bass = 32768;
msp->treble = 32768;
msp->input = -1;
msp->muted = 1;
for (i = 0; i < DFP_COUNT; i++)
msp->dfp_regs[i] = -1;
......@@ -1283,8 +1291,9 @@ static int msp_attach(struct i2c_adapter *adap, int addr,
#if 0
/* this will turn on a 1kHz beep - might be useful for debugging... */
msp3400c_write(client,I2C_MSP3400C_DFP, 0x0014, 0x1040);
msp3400c_write(c,I2C_MSP3400C_DFP, 0x0014, 0x1040);
#endif
msp3400c_setvolume(c,msp->muted,msp->left,msp->right);
sprintf(c->name,"MSP34%02d%c-%c%d",
(rev2>>8)&0xff, (rev1&0xff)+'@', ((rev1>>8)&0xff)+'@', rev2&0x1f);
......
......@@ -18,8 +18,12 @@
*
* loudness - set between 0 and 15 for varying degrees of loudness effect
*
* maxvol - set maximium volume to +20db (1), default is 0db(0)
*
*
* Revision: 0.7 - maxvol module parm to set maximium volume 0db or +20db
* store if muted so we can return it
* change balance only if flaged to
* Revision: 0.6 - added tone controls
* Revision: 0.5 - Fixed odd balance problem
* Revision: 0.4 - added muting
......@@ -48,12 +52,19 @@
#include "audiochip.h"
#include "id.h"
#ifndef VIDEO_AUDIO_BALANCE
# define VIDEO_AUDIO_BALANCE 32
#endif
MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
MODULE_LICENSE("GPL");
MODULE_PARM(debug,"i");
MODULE_PARM(loudness,"i");
MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)");
MODULE_PARM(maxvol,"i");
static int maxvol = 0;
static int loudness = 0; /* disable loudness by default */
static int debug = 0; /* insmod parameter */
......@@ -61,19 +72,10 @@ static int debug = 0; /* insmod parameter */
/* Address to scan (I2C address of this chip) */
static unsigned short normal_i2c[] = {
I2C_TDA7432 >> 1,
I2C_CLIENT_END};
static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short force[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
normal_i2c, normal_i2c_range,
probe, probe_range,
ignore, ignore_range,
force
I2C_CLIENT_END,
};
static unsigned short normal_i2c_range[] = { I2C_CLIENT_END, I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
/* Structure of address and subaddresses for the tda7432 */
......@@ -81,12 +83,12 @@ struct tda7432 {
int addr;
int input;
int volume;
int muted;
int bass, treble;
int lf, lr, rf, rr;
int loud;
struct i2c_client c;
};
static struct i2c_driver driver;
static struct i2c_client client_template;
......@@ -291,9 +293,10 @@ static void do_tda7432_init(struct i2c_client *client)
t->input = TDA7432_STEREO_IN | /* Main (stereo) input */
TDA7432_BASS_SYM | /* Symmetric bass cut */
TDA7432_BASS_NORM; /* Normal bass range */
t->volume = TDA7432_VOL_0DB; /* 0dB Volume */
t->volume = 0x3b ; /* -27dB Volume */
if (loudness) /* Turn loudness on? */
t->volume |= TDA7432_LD_ON;
t->muted = VIDEO_AUDIO_MUTE;
t->treble = TDA7432_TREBLE_0DB; /* 0dB Treble */
t->bass = TDA7432_BASS_0DB; /* 0dB Bass */
t->lf = TDA7432_ATTEN_0DB; /* 0dB attenuation */
......@@ -374,17 +377,24 @@ static int tda7432_command(struct i2c_client *client,
va->flags |= VIDEO_AUDIO_VOLUME |
VIDEO_AUDIO_BASS |
VIDEO_AUDIO_TREBLE;
VIDEO_AUDIO_TREBLE |
VIDEO_AUDIO_MUTABLE;
if (t->muted)
va->flags |= VIDEO_AUDIO_MUTE;
va->mode |= VIDEO_SOUND_STEREO;
/* Master volume control
* V4L volume is min 0, max 65535
* TDA7432 Volume:
* Min (-79dB) is 0x6f
* Max (+20dB) is 0x07
* Max (+20dB) is 0x07 (630)
* Max (0dB) is 0x20 (829)
* (Mask out bit 7 of vol - it's for the loudness setting)
*/
va->volume = ( 0x6f - (t->volume & 0x7F) ) * 630;
if (!maxvol){ /* max +20db */
va->volume = ( 0x6f - (t->volume & 0x7F) ) * 630;
} else { /* max 0db */
va->volume = ( 0x6f - (t->volume & 0x7F) ) * 829;
}
/* Balance depends on L,R attenuation
* V4L balance is 0 to 65535, middle is 32768
......@@ -401,15 +411,15 @@ static int tda7432_command(struct i2c_client *client,
/* left is attenuated, balance shifted right */
va->balance = (32768 + 1057*(t->lf));
/* Bass/treble */
/* Bass/treble 4 bits each */
va->bass=t->bass;
if(va->bass >= 0x8)
va->bass = ~(va->bass - 0x8) & 0xf;
va->bass = va->bass << 12;
va->bass = ~(va->bass - 0x8) & 0xf;
va->bass = (va->bass << 12)+(va->bass << 8)+(va->bass << 4)+(va->bass);
va->treble=t->treble;
if(va->treble >= 0x8)
va->treble = ~(va->treble - 0x8) & 0xf;
va->treble = va->treble << 12;
va->treble = ~(va->treble - 0x8) & 0xf;
va->treble = (va->treble << 12)+(va->treble << 8)+(va->treble << 4)+(va->treble);
break; /* VIDIOCGAUDIO case */
}
......@@ -420,26 +430,35 @@ static int tda7432_command(struct i2c_client *client,
struct video_audio *va = arg;
dprintk("tda7432: VIDEOCSAUDIO\n");
t->volume = 0x6f - ( (va->volume)/630 );
if(va->flags & VIDEO_AUDIO_VOLUME){
if(!maxvol){ /* max +20db */
t->volume = 0x6f - ((va->volume)/630);
} else { /* max 0db */
t->volume = 0x6f - ((va->volume)/829);
}
if (loudness) /* Turn on the loudness bit */
t->volume |= TDA7432_LD_ON;
tda7432_write(client,TDA7432_VL, t->volume);
}
if(va->flags & VIDEO_AUDIO_BASS)
{
t->bass = va->bass >> 12;
if(t->bass>= 0x8)
t->bass = (~t->bass & 0xf) + 0x8 ;
t->bass = t->bass | 0x10;
}
if(va->flags & VIDEO_AUDIO_TREBLE)
{
t->treble= va->treble >> 12;
if(t->treble>= 0x8)
t->treble = (~t->treble & 0xf) + 0x8 ;
}
if(va->flags & (VIDEO_AUDIO_TREBLE| VIDEO_AUDIO_BASS))
tda7432_write(client,TDA7432_TN, 0x10 | (t->bass << 4) | t->treble );
if(va->flags & VIDEO_AUDIO_BALANCE) {
if (va->balance < 32768)
{
/* shifted to left, attenuate right */
......@@ -464,20 +483,17 @@ static int tda7432_command(struct i2c_client *client,
t->lf = TDA7432_ATTEN_0DB;
t->lr = TDA7432_ATTEN_0DB;
}
}
tda7432_write(client,TDA7432_TN, (t->bass << 4)| t->treble );
tda7432_write(client,TDA7432_VL, t->volume);
if (va->flags & VIDEO_AUDIO_MUTE)
t->muted=(va->flags & VIDEO_AUDIO_MUTE);
if (t->muted)
{
/* Mute & update balance*/
tda7432_write(client,TDA7432_LF, t->lf | TDA7432_MUTE);
tda7432_write(client,TDA7432_LR, t->lr | TDA7432_MUTE);
tda7432_write(client,TDA7432_RF, t->rf | TDA7432_MUTE);
tda7432_write(client,TDA7432_RR, t->rr | TDA7432_MUTE);
}
else
{
} else {
tda7432_write(client,TDA7432_LF, t->lf);
tda7432_write(client,TDA7432_LR, t->lr);
tda7432_write(client,TDA7432_RF, t->rf);
......@@ -498,35 +514,29 @@ static int tda7432_command(struct i2c_client *client,
return 0;
}
static struct i2c_driver driver = {
"i2c tda7432 driver",
I2C_DRIVERID_TDA7432,
I2C_DF_NOTIFY,
tda7432_probe,
tda7432_detach,
tda7432_command,
.owner = THIS_MODULE,
.name = "i2c tda7432 driver",
.id = I2C_DRIVERID_TDA7432,
.flags = I2C_DF_NOTIFY,
.attach_adapter = tda7432_probe,
.detach_client = tda7432_detach,
.command = tda7432_command,
};
static struct i2c_client client_template =
{
"(unset)", /* name */
-1,
0,
0,
NULL,
&driver
.name = "tda7432",
.id = -1,
.driver = &driver,
};
static int tda7432_init(void)
{
if ( (loudness < 0) || (loudness > 15) )
{
if ( (loudness < 0) || (loudness > 15) ) {
printk(KERN_ERR "tda7432: loudness parameter must be between 0 and 15\n");
return -EINVAL;
}
i2c_add_driver(&driver);
return 0;
}
......
......@@ -42,19 +42,10 @@ static int debug = 0; /* insmod parameter */
/* Addresses to scan */
static unsigned short normal_i2c[] = {
I2C_TDA9875 >> 1,
I2C_CLIENT_END};
static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short force[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
normal_i2c, normal_i2c_range,
probe, probe_range,
ignore, ignore_range,
force
I2C_CLIENT_END
};
static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
I2C_CLIENT_INSMOD;
/* This is a superset of the TDA9875 */
struct tda9875 {
......@@ -64,7 +55,6 @@ struct tda9875 {
struct i2c_client c;
};
static struct i2c_driver driver;
static struct i2c_client client_template;
......@@ -397,22 +387,20 @@ static int tda9875_command(struct i2c_client *client,
static struct i2c_driver driver = {
"i2c tda9875 driver",
I2C_DRIVERID_TDA9875, /* Get new one for TDA9875 */
I2C_DF_NOTIFY,
tda9875_probe,
tda9875_detach,
tda9875_command,
.owner = THIS_MODULE,
.name = "i2c tda9875 driver",
.id = I2C_DRIVERID_TDA9875,
.flags = I2C_DF_NOTIFY,
.attach_adapter = tda9875_probe,
.detach_client = tda9875_detach,
.command = tda9875_command,
};
static struct i2c_client client_template =
{
"(unset)", /* name */
-1,
0,
0,
NULL,
&driver
.name = "tda9875",
.id = -1,
.driver = &driver,
};
static int tda9875_init(void)
......
......@@ -26,17 +26,7 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = {I2C_CLIENT_END};
static unsigned short normal_i2c_range[] = {0x86>>1,0x86>>1,I2C_CLIENT_END};
static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short force[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
normal_i2c, normal_i2c_range,
probe, probe_range,
ignore, ignore_range,
force
};
I2C_CLIENT_INSMOD;
/* insmod options */
static int debug = 0;
......@@ -145,8 +135,8 @@ static int tda9887_miro(struct tda9887 *t)
u8 bOutPort2 = cOutputPort2Inactive;
#endif
u8 bVideoTrap = cVideoTrapBypassOFF;
#if 0
u8 bTopAdjust = mbAGC;
#if 1
u8 bTopAdjust = 0x0e /* -2dB */;
#else
u8 bTopAdjust = 0;
#endif
......@@ -456,18 +446,19 @@ tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg)
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
name: "i2c tda9887 driver",
id: -1, /* FIXME */
flags: I2C_DF_NOTIFY,
attach_adapter: tda9887_probe,
detach_client: tda9887_detach,
command: tda9887_command,
.owner = THIS_MODULE,
.name = "i2c tda9887 driver",
.id = -1, /* FIXME */
.flags = I2C_DF_NOTIFY,
.attach_adapter = tda9887_probe,
.detach_client = tda9887_detach,
.command = tda9887_command,
};
static struct i2c_client client_template =
{
name: "tda9887",
flags: I2C_CLIENT_ALLOW_USE,
driver: &driver,
.name = "tda9887",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
static int tda9887_init_module(void)
......
......@@ -146,17 +146,7 @@ static unsigned short normal_i2c[] = {
I2C_PIC16C54 >> 1,
I2C_CLIENT_END };
static unsigned short normal_i2c_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static unsigned short force[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
normal_i2c, normal_i2c_range,
probe, probe_range,
ignore, ignore_range,
force
};
I2C_CLIENT_INSMOD;
static struct i2c_driver driver;
static struct i2c_client client_template;
......@@ -1088,6 +1078,19 @@ static int tea6300_shift12(int val) { return val >> 12; }
static int tda8425_shift10(int val) { return (val >> 10) | 0xc0; }
static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; }
static int tda8425_initialize(struct CHIPSTATE *chip)
{
struct CHIPDESC *desc = chiplist + chip->type;
int inputmap[8] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1,
/* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF,
/* off */ TDA8425_S1_OFF, /* on */ TDA8425_S1_CH2};
if (chip->c.adapter->id == (I2C_ALGO_BIT | I2C_HW_B_RIVA)) {
memcpy (desc->inputmap, inputmap, sizeof (inputmap));
}
return 0;
}
static void tda8425_setmode(struct CHIPSTATE *chip, int mode)
{
int s1 = chip->shadow.bytes[TDA8425_S1+1] & 0xe1;
......@@ -1188,7 +1191,7 @@ static struct CHIPDESC chiplist[] = {
.inputreg = TDA9873_SW,
.inputmute = TDA9873_MUTE | TDA9873_AUTOMUTE,
.inputmap = {0xa0, 0xa2, 0xa0, 0xa0, 0xc0},
.inputmask = TDA9873_INP_MASK | TDA9873_MUTE | TDA9873_AUTOMUTE
.inputmask = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE,
},
{
......@@ -1285,8 +1288,8 @@ static struct CHIPDESC chiplist[] = {
.registers = 9,
.flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
.leftreg = TDA8425_VR,
.rightreg = TDA8425_VL,
.leftreg = TDA8425_VL,
.rightreg = TDA8425_VR,
.bassreg = TDA8425_BA,
.treblereg = TDA8425_TR,
.volfunc = tda8425_shift10,
......@@ -1298,6 +1301,7 @@ static struct CHIPDESC chiplist[] = {
.inputmute = TDA8425_S1_OFF,
.setmode = tda8425_setmode,
.initialize = tda8425_initialize,
},
{
.name = "pic16c54 (PV951)",
......@@ -1316,7 +1320,7 @@ static struct CHIPDESC chiplist[] = {
PIC16C54_MISC_SND_NOTMUTE},
.inputmute = PIC16C54_MISC_SND_MUTE,
},
{ .name = NULL } /* EOF */
{ name: NULL } /* EOF */
};
......@@ -1544,19 +1548,20 @@ static int chip_command(struct i2c_client *client,
static struct i2c_driver driver = {
.name = "generic i2c audio driver",
.id = I2C_DRIVERID_TVAUDIO,
.flags = I2C_DF_NOTIFY,
.attach_adapter = chip_probe,
.detach_client = chip_detach,
.command = chip_command,
.owner = THIS_MODULE,
.name = "generic i2c audio driver",
.id = I2C_DRIVERID_TVAUDIO,
.flags = I2C_DF_NOTIFY,
.attach_adapter = chip_probe,
.detach_client = chip_detach,
.command = chip_command,
};
static struct i2c_client client_template =
{
.name = "(unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
.name = "(unset)",
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
static int audiochip_init_module(void)
......
......@@ -195,9 +195,8 @@ static int tvmixer_open(struct inode *inode, struct file *file)
/* lock bttv in memory while the mixer is in use */
file->private_data = mix;
if (!try_module_get(client->adapter->owner))
return -ENODEV;
if (client->adapter->owner)
try_module_get(client->adapter->owner);
return 0;
}
......@@ -211,25 +210,26 @@ static int tvmixer_release(struct inode *inode, struct file *file)
return -ENODEV;
}
module_put(client->adapter->owner);
if (client->adapter->owner)
module_put(client->adapter->owner);
return 0;
}
static struct i2c_driver driver = {
.name = "tv card mixer driver",
.id = I2C_DRIVERID_TVMIXER,
.flags = I2C_DF_DUMMY,
.attach_adapter = tvmixer_adapters,
.detach_client = tvmixer_clients,
.owner = THIS_MODULE,
.name = "tv card mixer driver",
.id = I2C_DRIVERID_TVMIXER,
.flags = I2C_DF_DUMMY,
.attach_adapter = tvmixer_adapters,
.detach_client = tvmixer_clients,
};
static struct file_operations tvmixer_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = tvmixer_ioctl,
.open = tvmixer_open,
.release = tvmixer_release,
.llseek = no_llseek,
.ioctl = tvmixer_ioctl,
.open = tvmixer_open,
.release = tvmixer_release,
};
/* ----------------------------------------------------------------------- */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment