Commit 8b0dd112 authored by Lee Jones's avatar Lee Jones Committed by Linus Walleij

ARM: ux500: Purge SDI support for ATAG booting

It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent ceb519e9
......@@ -65,12 +65,6 @@ struct mmci_platform_data mop500_sdi0_data = {
#endif
};
static void sdi0_configure(struct device *parent)
{
/* Add the device, force v2 to subrevision 1 */
db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
}
/*
* SDI1 (SDIO WLAN)
*/
......@@ -172,36 +166,3 @@ struct mmci_platform_data mop500_sdi4_data = {
.dma_tx_param = &mop500_sdi4_dma_cfg_tx,
#endif
};
void __init mop500_sdi_init(struct device *parent)
{
/* PoP:ed eMMC */
db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
}
void __init snowball_sdi_init(struct device *parent)
{
/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
/* On-board eMMC */
db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/* External Micro SD slot */
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
mop500_sdi0_data.cd_invert = true;
sdi0_configure(parent);
}
void __init hrefv60_sdi_init(struct device *parent)
{
/* PoP:ed eMMC */
db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/* External Micro SD slot */
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
sdi0_configure(parent);
/* WLAN SDIO channel */
db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
}
......@@ -164,7 +164,6 @@ static void __init mop500_init_machine(void)
mop500_pinmaps_init();
parent = u8500_init_devices();
mop500_sdi_init(parent);
mop500_spi_init(parent);
mop500_uart_init(parent);
......@@ -182,7 +181,6 @@ static void __init snowball_init_machine(void)
snowball_pinmaps_init();
parent = u8500_init_devices();
snowball_sdi_init(parent);
mop500_spi_init(parent);
mop500_uart_init(parent);
......@@ -199,7 +197,6 @@ static void __init hrefv60_init_machine(void)
hrefv60_pinmaps_init();
parent = u8500_init_devices();
hrefv60_sdi_init(parent);
mop500_spi_init(parent);
mop500_uart_init(parent);
......
......@@ -94,9 +94,6 @@ extern struct amba_pl011_data uart2_plat;
extern struct pl022_ssp_controller ssp0_plat;
extern struct stedma40_platform_data dma40_plat_data;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
extern void hrefv60_sdi_init(struct device *parent);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pinmaps_init(void);
......
......@@ -24,16 +24,6 @@ dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
pdata, periphid);
}
struct mmci_platform_data;
static inline struct amba_device *
dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
int irq, struct mmci_platform_data *pdata, u32 periphid)
{
return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
pdata, periphid);
}
struct amba_pl011_data;
static inline struct amba_device *
......
......@@ -49,25 +49,6 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
ux500_add_usb(parent, U8500_USBOTG_BASE, \
IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
#define db8500_add_sdi0(parent, pdata, pid) \
dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
IRQ_DB8500_SDMMC0, pdata, pid)
#define db8500_add_sdi1(parent, pdata, pid) \
dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
IRQ_DB8500_SDMMC1, pdata, pid)
#define db8500_add_sdi2(parent, pdata, pid) \
dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
IRQ_DB8500_SDMMC2, pdata, pid)
#define db8500_add_sdi3(parent, pdata, pid) \
dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
IRQ_DB8500_SDMMC3, pdata, pid)
#define db8500_add_sdi4(parent, pdata, pid) \
dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
IRQ_DB8500_SDMMC4, pdata, pid)
#define db8500_add_sdi5(parent, pdata, pid) \
dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
IRQ_DB8500_SDMMC5, pdata, pid)
#define db8500_add_ssp0(parent, pdata) \
db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
IRQ_DB8500_SSP0, pdata)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment