Commit 8b4cd8a0 authored by David S. Miller's avatar David S. Miller

Merge branch 'intel'

Jeff Kirsher says:

====================
This series contains updates to e1000e only.

All three patches come from Konstantin Khlebnikov to resolve power
management issues.  The first patch removes redundant and unbalanced
pci_disable_device() from the shutdown function.  The second patch
removes redundant actions from the driver and fixes the interaction
with actions in pci-bus runtime power management code.  The third
and last patch fixes some messages like 'Error reading PHY register'
and 'Hardware Erorr' and saves several seconds on reboot.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents f8af75f3 e60b22c5
......@@ -36,6 +36,7 @@
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/mdio.h>
#include <linux/pm_runtime.h>
#include "e1000.h"
......@@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev,
return 0;
}
static int e1000e_ethtool_begin(struct net_device *netdev)
{
return pm_runtime_get_sync(netdev->dev.parent);
}
static void e1000e_ethtool_complete(struct net_device *netdev)
{
pm_runtime_put_sync(netdev->dev.parent);
}
static const struct ethtool_ops e1000_ethtool_ops = {
.begin = e1000e_ethtool_begin,
.complete = e1000e_ethtool_complete,
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,
......
......@@ -4303,6 +4303,7 @@ static int e1000_open(struct net_device *netdev)
netif_start_queue(netdev);
adapter->idle_check = true;
hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
/* fire a link status change interrupt to start the watchdog */
......@@ -4662,6 +4663,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
int ret_val;
pm_runtime_get_sync(&adapter->pdev->dev);
ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
......@@ -4672,6 +4674,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
if (ret_val)
e_warn("Error reading PHY register\n");
pm_runtime_put_sync(&adapter->pdev->dev);
} else {
/* Do not read PHY registers if link is not up
* Set values to typical power-on defaults
......@@ -5887,8 +5890,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
return retval;
}
static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
bool runtime)
static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
......@@ -5912,10 +5914,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
}
e1000e_reset_interrupt_capability(adapter);
retval = pci_save_state(pdev);
if (retval)
return retval;
status = er32(STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
......@@ -5971,13 +5969,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
ew32(WUFC, 0);
}
*enable_wake = !!wufc;
/* make sure adapter isn't asleep if manageability is enabled */
if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
(hw->mac.ops.check_mng_mode(hw)))
*enable_wake = true;
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
......@@ -5986,27 +5977,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
*/
e1000e_release_hw_control(adapter);
pci_disable_device(pdev);
return 0;
}
static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
{
if (sleep && wake) {
pci_prepare_to_sleep(pdev);
return;
}
pci_wake_from_d3(pdev, wake);
pci_set_power_state(pdev, PCI_D3hot);
}
static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
bool wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
pci_clear_master(pdev);
/* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
......@@ -6021,12 +5992,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
(devctl & ~PCI_EXP_DEVCTL_CERE));
e1000_power_off(pdev, sleep, wake);
pci_save_state(pdev);
pci_prepare_to_sleep(pdev);
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
} else {
e1000_power_off(pdev, sleep, wake);
}
return 0;
}
#ifdef CONFIG_PCIEASPM
......@@ -6084,9 +6056,7 @@ static int __e1000_resume(struct pci_dev *pdev)
if (aspm_disable_flag)
e1000e_disable_aspm(pdev, aspm_disable_flag);
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_save_state(pdev);
pci_set_master(pdev);
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
......@@ -6152,14 +6122,8 @@ static int __e1000_resume(struct pci_dev *pdev)
static int e1000_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int retval;
bool wake;
retval = __e1000_shutdown(pdev, &wake, false);
if (!retval)
e1000_complete_shutdown(pdev, true, wake);
return retval;
return __e1000_shutdown(pdev, false);
}
static int e1000_resume(struct device *dev)
......@@ -6182,13 +6146,10 @@ static int e1000_runtime_suspend(struct device *dev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
if (e1000e_pm_ready(adapter)) {
bool wake;
__e1000_shutdown(pdev, &wake, true);
}
if (!e1000e_pm_ready(adapter))
return 0;
return 0;
return __e1000_shutdown(pdev, true);
}
static int e1000_idle(struct device *dev)
......@@ -6226,12 +6187,7 @@ static int e1000_runtime_resume(struct device *dev)
static void e1000_shutdown(struct pci_dev *pdev)
{
bool wake = false;
__e1000_shutdown(pdev, &wake, false);
if (system_state == SYSTEM_POWER_OFF)
e1000_complete_shutdown(pdev, false, wake);
__e1000_shutdown(pdev, false);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
......@@ -6352,9 +6308,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
pci_set_master(pdev);
pdev->state_saved = true;
pci_restore_state(pdev);
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
......@@ -6783,7 +6739,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
(hw->mac.ops.check_mng_mode(hw)))
device_wakeup_enable(&pdev->dev);
/* save off EEPROM version number */
e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment