arm64: zynqmp: Add phy description for usb3.0

usb3.0 requires serdes setting that's why also wire it up.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cd856e5f87bc967373691d04e79de3d0022ef424.1623684253.git.michal.simek@xilinx.com

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts

@@ -538,6 +538,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "peripheral";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+	maximum-speed = "super-speed";
 };
 
 /* ULPI SMSC USB3320 */
@@ -546,6 +549,9 @@ &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts

@@ -979,6 +979,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts

@@ -469,6 +469,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts

@@ -491,6 +491,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

@@ -985,6 +985,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

@@ -811,6 +811,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &zynqmp_dpdma {