arm64: dts: qcom: msm8953: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-6-dmitry.baryshkov@linaro.org

arch/arm64/boot/dts/qcom/msm8953.dtsi

@@ -764,10 +764,10 @@ gcc: clock-controller@1800000 {
 			#power-domain-cells = <1>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&dsi0_phy 1>,
-				 <&dsi0_phy 0>,
-				 <&dsi1_phy 1>,
-				 <&dsi1_phy 0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
 			clock-names = "xo",
 				      "sleep",
 				      "dsi0pll",
@@ -849,20 +849,20 @@ ports {
 					port@0 {
 						reg = <0>;
 						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
 						mdp5_intf2_out: endpoint {
-							remote-endpoint = <&dsi1_in>;
+							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
 				};
 			};
 
-			dsi0: dsi@1a94000 {
+			mdss_dsi0: dsi@1a94000 {
 				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0x01a94000 0x400>;
 				reg-names = "dsi_ctrl";
@@ -872,8 +872,8 @@ dsi0: dsi@1a94000 {
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>,
-							 <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -888,7 +888,7 @@ dsi0: dsi@1a94000 {
 					      "pixel",
 					      "core";
 
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -901,20 +901,20 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&mdp5_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi0_phy: phy@1a94400 {
+			mdss_dsi0_phy: phy@1a94400 {
 				compatible = "qcom,dsi-phy-14nm-8953";
 				reg = <0x01a94400 0x100>,
 				      <0x01a94500 0x300>,
@@ -932,7 +932,7 @@ dsi0_phy: phy@1a94400 {
 				status = "disabled";
 			};
 
-			dsi1: dsi@1a96000 {
+			mdss_dsi1: dsi@1a96000 {
 				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0x01a96000 0x400>;
 				reg-names = "dsi_ctrl";
@@ -942,8 +942,8 @@ dsi1: dsi@1a96000 {
 
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&dsi1_phy 0>,
-							 <&dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -958,7 +958,7 @@ dsi1: dsi@1a96000 {
 					      "pixel",
 					      "core";
 
-				phys = <&dsi1_phy>;
+				phys = <&mdss_dsi1_phy>;
 
 				status = "disabled";
 
@@ -968,20 +968,20 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 							remote-endpoint = <&mdp5_intf2_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi1_phy: phy@1a96400 {
+			mdss_dsi1_phy: phy@1a96400 {
 				compatible = "qcom,dsi-phy-14nm-8953";
 				reg = <0x01a96400 0x100>,
 				      <0x01a96500 0x300>,