Commit 8bbb1cf6 authored by Calvin Owens's avatar Calvin Owens Committed by Martin K. Petersen

mpt3sas: Fix warnings exposed by W=1

Trivial non-functional changes for a couple annoying things:

  1) Functions local to files are not declared static, which is
  frustrating when reading the code because it's non-obvious at first
  glance what's actually called from other files.

  2) Set-but-unused variables abound, presumably to mask -Wunused-result
  errors in the past. None of these are flagged today though (with one
  exception noted below), so remove them.

Fixing (2) exposed the fact that we improperly ignore the return value
of scsi_device_reprobe() in _scsih_reprobe_lun(). Fixing the calling
code to deal with the potential error is non-trivial, so for now just
WARN().
Signed-off-by: default avatarCalvin Owens <calvinowens@fb.com>
Acked-by: default avatarChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 98c56ad3
......@@ -2039,7 +2039,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
* mpt3sas_base_unmap_resources - free controller resources
* @ioc: per adapter object
*/
void
static void
mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
{
struct pci_dev *pdev = ioc->pdev;
......@@ -3884,7 +3884,6 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
int i;
u8 failed;
u16 dummy;
__le32 *mfp;
/* make sure doorbell is not in use */
......@@ -3964,7 +3963,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
return -EFAULT;
}
if (i >= reply_bytes/2) /* overflow case */
dummy = readl(&ioc->chip->Doorbell);
readl(&ioc->chip->Doorbell);
else
reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
& MPI2_DOORBELL_DATA_MASK);
......@@ -4009,7 +4008,6 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
{
u16 smid;
u32 ioc_state;
unsigned long timeleft;
bool issue_reset = false;
int rc;
void *request;
......@@ -4062,7 +4060,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
ioc->ioc_link_reset_in_progress = 1;
init_completion(&ioc->base_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
......@@ -4112,7 +4110,6 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
{
u16 smid;
u32 ioc_state;
unsigned long timeleft;
bool issue_reset = false;
int rc;
void *request;
......@@ -4163,7 +4160,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
init_completion(&ioc->base_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
......@@ -4548,7 +4545,6 @@ _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
{
Mpi2PortEnableRequest_t *mpi_request;
Mpi2PortEnableReply_t *mpi_reply;
unsigned long timeleft;
int r = 0;
u16 smid;
u16 ioc_status;
......@@ -4576,8 +4572,7 @@ _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
init_completion(&ioc->port_enable_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
300*HZ);
wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ);
if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
ioc->name, __func__);
......@@ -4728,7 +4723,6 @@ static int
_base_event_notification(struct MPT3SAS_ADAPTER *ioc)
{
Mpi2EventNotificationRequest_t *mpi_request;
unsigned long timeleft;
u16 smid;
int r = 0;
int i;
......@@ -4760,7 +4754,7 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc)
cpu_to_le32(ioc->event_masks[i]);
init_completion(&ioc->base_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
ioc->name, __func__);
......
......@@ -285,7 +285,6 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
{
u16 smid;
u32 ioc_state;
unsigned long timeleft;
Mpi2ConfigRequest_t *config_request;
int r;
u8 retry_count, issue_host_reset = 0;
......@@ -386,8 +385,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
_config_display_some_debug(ioc, smid, "config_request", NULL);
init_completion(&ioc->config_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
timeout*HZ);
wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
ioc->name, __func__);
......
......@@ -518,7 +518,7 @@ mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
*
* Called when application request fasyn callback handler.
*/
int
static int
_ctl_fasync(int fd, struct file *filep, int mode)
{
return fasync_helper(fd, filep, mode, &async_queue);
......@@ -530,7 +530,7 @@ _ctl_fasync(int fd, struct file *filep, int mode)
* @wait -
*
*/
unsigned int
static unsigned int
_ctl_poll(struct file *filep, poll_table *wait)
{
struct MPT3SAS_ADAPTER *ioc;
......@@ -641,9 +641,8 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
MPI2RequestHeader_t *mpi_request = NULL, *request;
MPI2DefaultReply_t *mpi_reply;
u32 ioc_state;
u16 ioc_status;
u16 smid;
unsigned long timeout, timeleft;
unsigned long timeout;
u8 issue_reset;
u32 sz;
void *psge;
......@@ -914,8 +913,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
else
timeout = karg.timeout;
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
timeout*HZ);
wait_for_completion_timeout(&ioc->ctl_cmds.done, timeout*HZ);
if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
Mpi2SCSITaskManagementRequest_t *tm_request =
(Mpi2SCSITaskManagementRequest_t *)mpi_request;
......@@ -938,7 +936,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
(ioc->logging_level & MPT_DEBUG_TM)) {
......@@ -1378,7 +1375,6 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
Mpi2DiagBufferPostRequest_t *mpi_request;
Mpi2DiagBufferPostReply_t *mpi_reply;
u8 buffer_type;
unsigned long timeleft;
u16 smid;
u16 ioc_status;
u32 ioc_state;
......@@ -1496,7 +1492,7 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
init_completion(&ioc->ctl_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
......@@ -1796,7 +1792,6 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
u16 ioc_status;
u32 ioc_state;
int rc;
unsigned long timeleft;
dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
......@@ -1844,7 +1839,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
init_completion(&ioc->ctl_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
......@@ -1990,7 +1985,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
Mpi2DiagBufferPostReply_t *mpi_reply;
int rc, i;
u8 buffer_type;
unsigned long timeleft, request_size, copy_size;
unsigned long request_size, copy_size;
u16 smid;
u16 ioc_status;
u8 issue_reset = 0;
......@@ -2111,7 +2106,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
init_completion(&ioc->ctl_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
......@@ -2346,7 +2341,7 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
* @cmd - ioctl opcode
* @arg -
*/
long
static long
_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
......@@ -2366,7 +2361,7 @@ _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
* @cmd - ioctl opcode
* @arg -
*/
long
static long
_ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
......@@ -2386,7 +2381,7 @@ _ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
*
* This routine handles 32 bit applications in 64bit os.
*/
long
static long
_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
......@@ -2404,7 +2399,7 @@ _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
*
* This routine handles 32 bit applications in 64bit os.
*/
long
static long
_ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
......
......@@ -1195,7 +1195,7 @@ _scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id,
*
* Returns queue depth.
*/
int
static int
scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct Scsi_Host *shost = sdev->host;
......@@ -1244,7 +1244,7 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
int
static int
scsih_target_alloc(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
......@@ -1311,7 +1311,7 @@ scsih_target_alloc(struct scsi_target *starget)
*
* Returns nothing.
*/
void
static void
scsih_target_destroy(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
......@@ -1320,7 +1320,6 @@ scsih_target_destroy(struct scsi_target *starget)
struct _sas_device *sas_device;
struct _raid_device *raid_device;
unsigned long flags;
struct sas_rphy *rphy;
sas_target_priv_data = starget->hostdata;
if (!sas_target_priv_data)
......@@ -1339,7 +1338,6 @@ scsih_target_destroy(struct scsi_target *starget)
}
spin_lock_irqsave(&ioc->sas_device_lock, flags);
rphy = dev_to_rphy(starget->dev.parent);
sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
if (sas_device && (sas_device->starget == starget) &&
(sas_device->id == starget->id) &&
......@@ -1369,7 +1367,7 @@ scsih_target_destroy(struct scsi_target *starget)
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
int
static int
scsih_slave_alloc(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
......@@ -1434,7 +1432,7 @@ scsih_slave_alloc(struct scsi_device *sdev)
*
* Returns nothing.
*/
void
static void
scsih_slave_destroy(struct scsi_device *sdev)
{
struct MPT3SAS_TARGET *sas_target_priv_data;
......@@ -1527,7 +1525,7 @@ _scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
* scsih_is_raid - return boolean indicating device is raid volume
* @dev the device struct object
*/
int
static int
scsih_is_raid(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
......@@ -1542,7 +1540,7 @@ scsih_is_raid(struct device *dev)
* scsih_get_resync - get raid volume resync percent complete
* @dev the device struct object
*/
void
static void
scsih_get_resync(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
......@@ -1603,7 +1601,7 @@ scsih_get_resync(struct device *dev)
* scsih_get_state - get raid volume level
* @dev the device struct object
*/
void
static void
scsih_get_state(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
......@@ -1805,7 +1803,7 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
int
static int
scsih_slave_configure(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
......@@ -2021,7 +2019,7 @@ scsih_slave_configure(struct scsi_device *sdev)
*
* Return nothing.
*/
int
static int
scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int params[])
{
......@@ -2217,7 +2215,6 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
Mpi2SCSITaskManagementReply_t *mpi_reply;
u16 smid = 0;
u32 ioc_state;
unsigned long timeleft;
struct scsiio_tracker *scsi_lookup = NULL;
int rc;
u16 msix_task = 0;
......@@ -2283,7 +2280,7 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
else
msix_task = 0;
mpt3sas_base_put_smid_hi_priority(ioc, smid, msix_task);
timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
ioc->name, __func__);
......@@ -2434,7 +2431,7 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
*
* Returns SUCCESS if command aborted else FAILED
*/
int
static int
scsih_abort(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
......@@ -2493,7 +2490,7 @@ scsih_abort(struct scsi_cmnd *scmd)
*
* Returns SUCCESS if command aborted else FAILED
*/
int
static int
scsih_dev_reset(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
......@@ -2556,7 +2553,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
*
* Returns SUCCESS if command aborted else FAILED
*/
int
static int
scsih_target_reset(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
......@@ -2619,7 +2616,7 @@ scsih_target_reset(struct scsi_cmnd *scmd)
*
* Returns SUCCESS if command aborted else FAILED
*/
int
static int
scsih_host_reset(struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
......@@ -3449,7 +3446,7 @@ _scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
*
* Context - processed in interrupt context.
*/
void
static void
_scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 event,
u32 event_context)
{
......@@ -3488,7 +3485,7 @@ _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 event,
*
* Context - processed in interrupt context.
*/
void
static void
_scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
u16 smid, u16 handle)
{
......@@ -4026,7 +4023,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
* SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
* SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
*/
int
static int
scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
......@@ -6305,11 +6302,10 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
static void
_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
{
int rc;
sdev->no_uld_attach = no_uld_attach ? 1 : 0;
sdev_printk(KERN_INFO, sdev, "%s raid component\n",
sdev->no_uld_attach ? "hidding" : "exposing");
rc = scsi_device_reprobe(sdev);
WARN_ON(scsi_device_reprobe(sdev));
}
/**
......@@ -8131,7 +8127,7 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
* Routine called when unloading the driver.
* Return nothing.
*/
void scsih_remove(struct pci_dev *pdev)
static void scsih_remove(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
......@@ -8204,7 +8200,7 @@ void scsih_remove(struct pci_dev *pdev)
*
* Return nothing.
*/
void
static void
scsih_shutdown(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -8445,7 +8441,7 @@ _scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
* of scanning the entire bus. In our implemention, we will kick off
* firmware discovery.
*/
void
static void
scsih_scan_start(struct Scsi_Host *shost)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
......@@ -8472,7 +8468,7 @@ scsih_scan_start(struct Scsi_Host *shost)
* scsi_host and the elapsed time of the scan in jiffies. In our implemention,
* we wait for firmware discovery to complete, then return 1.
*/
int
static int
scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
......@@ -8602,7 +8598,7 @@ static struct raid_function_template mpt3sas_raid_functions = {
* MPI25_VERSION for SAS 3.0 HBA devices, and
* MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
*/
u16
static u16
_scsih_determine_hba_mpi_version(struct pci_dev *pdev)
{
......@@ -8654,7 +8650,7 @@ _scsih_determine_hba_mpi_version(struct pci_dev *pdev)
*
* Returns 0 success, anything else error.
*/
int
static int
_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct MPT3SAS_ADAPTER *ioc;
......@@ -8863,7 +8859,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
*
* Returns 0 success, anything else error.
*/
int
static int
scsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -8890,7 +8886,7 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state)
*
* Returns 0 success, anything else error.
*/
int
static int
scsih_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -8927,7 +8923,7 @@ scsih_resume(struct pci_dev *pdev)
* Return value:
* PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
*/
pci_ers_result_t
static pci_ers_result_t
scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -8964,7 +8960,7 @@ scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
* code after the PCI slot has been reset, just before we
* should resume normal operations.
*/
pci_ers_result_t
static pci_ers_result_t
scsih_pci_slot_reset(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -9000,7 +8996,7 @@ scsih_pci_slot_reset(struct pci_dev *pdev)
* OK to resume normal operation. Use completion to allow
* halted scsi ops to resume.
*/
void
static void
scsih_pci_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -9017,7 +9013,7 @@ scsih_pci_resume(struct pci_dev *pdev)
* scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
* @pdev: pointer to PCI device
*/
pci_ers_result_t
static pci_ers_result_t
scsih_pci_mmio_enabled(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
......@@ -9145,7 +9141,7 @@ static struct pci_driver mpt3sas_driver = {
*
* Returns 0 success, anything else error.
*/
int
static int
scsih_init(void)
{
mpt2_ids = 0;
......@@ -9195,7 +9191,7 @@ scsih_init(void)
*
* Returns 0 success, anything else error.
*/
void
static void
scsih_exit(void)
{
......
......@@ -300,7 +300,6 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
int rc;
u16 smid;
u32 ioc_state;
unsigned long timeleft;
void *psge;
u8 issue_reset = 0;
void *data_out = NULL;
......@@ -394,8 +393,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
ioc->name, (unsigned long long)sas_address));
init_completion(&ioc->transport_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
......@@ -1106,7 +1104,6 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
int rc;
u16 smid;
u32 ioc_state;
unsigned long timeleft;
void *psge;
u8 issue_reset = 0;
void *data_out = NULL;
......@@ -1202,8 +1199,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
phy->number));
init_completion(&ioc->transport_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
......@@ -1419,7 +1415,6 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
int rc;
u16 smid;
u32 ioc_state;
unsigned long timeleft;
void *psge;
u8 issue_reset = 0;
void *data_out = NULL;
......@@ -1520,8 +1515,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
phy->number, phy_operation));
init_completion(&ioc->transport_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
......@@ -1896,7 +1890,6 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
int rc;
u16 smid;
u32 ioc_state;
unsigned long timeleft;
void *psge;
u8 issue_reset = 0;
dma_addr_t dma_addr_in = 0;
......@@ -2040,8 +2033,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
init_completion(&ioc->transport_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s : timeout\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment