Skip to content

L
linux
Commit 8bd8822c authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt 

i.MX device tree changes for 5.16:

- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
  Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
  various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
  properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
  device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
  partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.

* tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits)
  ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
  ARM: dts: ls1021a: move thermal-zones node out of soc/
  ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
  ARM: dts: ls1021a-qds: change fpga to simple-mfd device
  ARM: dts: ls1021a: add #power-domain-cells for power-controller node
  ARM: dts: ls1021a: add #dma-cells to qdma node
  ARM: dts: ls1021a: fix memory node for schema check
  ARM: dts: ls1021a: remove regulators simple-bus
  ARM: dts: ls1021a: disable ifc node by default
  ARM: dts: ls1021a: breakup long values in thermal node
  ARM: dts: ls1021a: fix board compatible to follow binding schema
  ARM: dts: ls1021a: update pcie nodes for dt-schema check
  ARM: dts: ls1021a-qds: Add node for QSPI flash
  ARM: dts: ls1021a: change to use SPDX identifiers
  ARM: dts: ls1021a: change dma channels order to match schema
  ARM: dts: ls1021a: remove clock-names property for i2c nodes
  ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
  ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery
  ARM: dts: imx6: skov: provide panel support for lt2 variants
  ARM: dts: imx6qdl-apalis: Fix typo in ADC comment
  ...

Link: https://lore.kernel.org/r/20211016140138.1603-3-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 353bbb3d 05e63b48
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1653 additions and 326 deletions
arch/arm/boot/dts/Makefile
View file @ 8bd8822c
......@@ -645,10 +645,12 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-tolino-shine2hd.dtb \
imx6sl-tolino-shine3.dtb \
imx6sl-tolino-vision5.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
imx6sll-evk.dtb \
imx6sll-kobo-clarahd.dtb
imx6sll-kobo-clarahd.dtb \
imx6sll-kobo-librah2o.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
......@@ -681,6 +683,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-emmc-eval-v3.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
imx6ull-myir-mys-6ulx-eval.dtb \
......
arch/arm/boot/dts/e60k02.dtsi
View file @ 8bd8822c
......@@ -41,7 +41,7 @@ cover {
leds: leds {
compatible = "gpio-leds";
on {
led {
label = "e60k02:white:on";
gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
......
arch/arm/boot/dts/e70k02.dtsi 0 → 100644
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2021 Andreas Kemnade
* based on works
* Copyright 2016 Freescale Semiconductor, Inc.
* and
* Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
*
* Netronix E70K02 board common.
* This board is equipped with different SoCs and
* found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
* the Tolino Shine 3 (with i.MX6SL)
*/
#include <dt-bindings/input/input.h>
/ {
aliases {
mmc0 = &usdhc1;
mmc1 = &usdhc3;
};
chosen {
stdout-path = &uart1;
};
gpio_keys: gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
cover {
label = "Cover";
gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
linux,input-type = <EV_SW>;
wakeup-source;
};
pageup {
label = "PageUp";
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PAGEUP>;
};
pagedown {
label = "PageDown";
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PAGEDOWN>;
};
};
leds: leds {
compatible = "gpio-leds";
led {
label = "e70k02:white:on";
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
reg_wifi: regulator-wifi {
compatible = "regulator-fixed";
regulator-name = "SD3_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
post-power-on-delay-ms = <20>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
};
};
&i2c1 {
clock-frequency = <100000>;
status = "okay";
lm3630a: backlight@36 {
reg = <0x36>;
compatible = "ti,lm3630a";
enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
led-sources = <0>;
label = "backlight_warm";
default-brightness = <0>;
max-brightness = <255>;
};
led@1 {
reg = <1>;
led-sources = <1>;
label = "backlight_cold";
default-brightness = <0>;
max-brightness = <255>;
};
};
/* TODO: KX122 acceleration sensor a 0x1e */
};
&i2c2 {
clock-frequency = <100000>;
status = "okay";
/* TODO: CYTTSP5 touch controller at 0x24 */
/* TODO: SY7636 PMIC for E Ink at 0x62 */
};
&i2c3 {
clock-frequency = <100000>;
status = "okay";
ricoh619: pmic@32 {
compatible = "ricoh,rc5t619";
reg = <0x32>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
system-power-controller;
regulators {
dcdc1_reg: DCDC1 {
regulator-name = "DCDC1";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-max-microvolt = <900000>;
regulator-suspend-min-microvolt = <900000>;
};
};
/* Core3_3V3 */
dcdc2_reg: DCDC2 {
regulator-name = "DCDC2";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-max-microvolt = <3300000>;
regulator-suspend-min-microvolt = <3300000>;
};
};
dcdc3_reg: DCDC3 {
regulator-name = "DCDC3";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-max-microvolt = <1140000>;
regulator-suspend-min-microvolt = <1140000>;
};
};
/* Core4_1V2 */
dcdc4_reg: DCDC4 {
regulator-name = "DCDC4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-max-microvolt = <1140000>;
regulator-suspend-min-microvolt = <1140000>;
};
};
/* Core4_1V8 */
dcdc5_reg: DCDC5 {
regulator-name = "DCDC5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-max-microvolt = <1700000>;
regulator-suspend-min-microvolt = <1700000>;
};
};
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-boot-on;
};
/* Core1_3V3 */
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-max-microvolt = <3000000>;
regulator-suspend-min-microvolt = <3000000>;
};
};
/* Core5_1V2 */
ldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: LDO4 {
regulator-name = "LDO4";
regulator-boot-on;
};
/* SPD_3V3 */
ldo5_reg: LDO5 {
regulator-name = "LDO5";
regulator-always-on;
regulator-boot-on;
};
/* DDR_0V6 */
ldo6_reg: LDO6 {
regulator-name = "LDO6";
regulator-always-on;
regulator-boot-on;
};
/* VDD_PWM */
ldo7_reg: LDO7 {
regulator-name = "LDO7";
regulator-boot-on;
};
/* ldo_1v8 */
ldo8_reg: LDO8 {
regulator-name = "LDO8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
ldo9_reg: LDO9 {
regulator-name = "LDO9";
regulator-boot-on;
};
ldo10_reg: LDO10 {
regulator-name = "LDO10";
regulator-boot-on;
};
ldortc1_reg: LDORTC1 {
regulator-name = "LDORTC1";
regulator-boot-on;
};
};
};
};
&snvs_rtc {
/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
status = "disabled";
};
&uart1 {
status = "okay";
};
&usdhc1 {
non-removable;
no-1-8-v;
status = "okay";
};
&usdhc3 {
vmmc-supply = <&reg_wifi>;
mmc-pwrseq = <&wifi_pwrseq>;
cap-power-off-card;
non-removable;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
disable-over-current;
srp-disable;
hnp-disable;
adp-disable;
status = "okay";
};
arch/arm/boot/dts/imx6dl-alti6p.dts
View file @ 8bd8822c
......@@ -192,7 +192,7 @@ &can1 {
};
&ecspi1 {
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
......
arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
View file @ 8bd8822c
......@@ -47,7 +47,6 @@ &i2c5 {
mpl3115a2: pressure-sensor@60 {
compatible = "fsl,mpl3115";
reg = <0x60>;
vcc-supply = <&reg_3v3_acm>;
/*
* The MPL3115 interrupts are connected to pin 22 and 23
......
arch/arm/boot/dts/imx6dl-prtrvt.dts
View file @ 8bd8822c
......@@ -67,11 +67,9 @@ nfc@0 {
ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
<&gpio5 11 GPIO_ACTIVE_LOW>;
vin-supply = <&reg_3v3>;
vin-voltage-override = <3100000>;
autosuspend-delay = <30000>;
irq-status-read-quirk;
en2-rf-quirk;
t5t-rmb-extra-byte-quirk;
status = "okay";
};
};
......
arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
View file @ 8bd8822c
......@@ -6,6 +6,7 @@
#include "imx6dl.dtsi"
#include "imx6qdl-skov-cpu.dtsi"
#include "imx6qdl-skov-cpu-revc.dtsi"
#include "imx6qdl-skov-revc-lt2.dtsi"
/ {
model = "SKOV IMX6 CPU SoloCore";
......
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
View file @ 8bd8822c
......@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/ {
......@@ -277,6 +278,7 @@ chan@0 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
chan@1 {
......@@ -284,6 +286,7 @@ chan@1 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
};
chan@2 {
......@@ -291,13 +294,7 @@ chan@2 {
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <2>;
};
chan@3 {
chan-name = "W";
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
reg = <3>;
color = <LED_COLOR_ID_BLUE>;
};
};
......
arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
View file @ 8bd8822c
......@@ -6,6 +6,7 @@
#include "imx6q.dtsi"
#include "imx6qdl-skov-cpu.dtsi"
#include "imx6qdl-skov-cpu-revc.dtsi"
#include "imx6qdl-skov-revc-lt2.dtsi"
/ {
model = "SKOV IMX6 CPU QuadCore";
......
arch/arm/boot/dts/imx6qdl-apalis.dtsi
View file @ 8bd8822c
......@@ -310,10 +310,10 @@ stmpe811@41 {
st,mod-12b = <1>;
/* internal ADC reference */
st,ref-sel = <0>;
/* ADC converstion time: 80 clocks */
/* ADC conversion time: 80 clocks */
st,sample-time = <4>;
stmpe_touchscreen {
stmpe_touchscreen: stmpe-touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
......@@ -330,10 +330,11 @@ stmpe_touchscreen {
st,touch-det-delay = <5>;
};
stmpe_adc {
stmpe_adc: stmpe-adc {
compatible = "st,stmpe-adc";
/* forbid to use ADC channels 3-0 (touch) */
st,norequest-mask = <0x0F>;
#io-channel-cells = <1>;
};
};
};
......
arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
View file @ 8bd8822c
......@@ -145,8 +145,11 @@ &hdmi {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <400000>;
status = "disabled";
......@@ -185,8 +188,11 @@ i2c_rtc: rtc@68 {
};
&i2c2 {
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "disabled";
};
......@@ -256,6 +262,7 @@ &usdhc1 {
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
no-1-8-v;
disable-wp;
status = "disabled";
};
......@@ -299,6 +306,20 @@ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
......@@ -306,10 +327,10 @@ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
>;
};
pinctrl_i2c1: i2c1grp {
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
>;
};
......
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
View file @ 8bd8822c
......@@ -78,8 +78,11 @@ &gpmi {
};
&i2c3 {
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <400000>;
status = "okay";
......@@ -259,6 +262,13 @@ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
......
arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi 0 → 100644
View file @ 8bd8822c
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
/ {
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
pwms = <&pwm2 0 20000 0>;
brightness-levels = <0 255>;
num-interpolated-steps = <17>;
default-brightness-level = <8>;
power-supply = <&reg_24v0>;
};
display {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1>;
port@0 {
reg = <0>;
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
display0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
panel {
compatible = "logictechno,lttd800480070-l2rt";
backlight = <&backlight>;
power-supply = <&reg_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&display0_out>;
};
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&iomuxc {
pinctrl_backlight: backlightgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58
>;
};
pinctrl_ipu1: ipu1grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
>;
};
};
arch/arm/boot/dts/imx6qdl-tqma6.dtsi
View file @ 8bd8822c
......@@ -20,7 +20,7 @@ reg_3p3v: regulator-3p3v {
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
status = "okay";
m25p80: flash@0 {
......
arch/arm/boot/dts/imx6qdl.dtsi
View file @ 8bd8822c
......@@ -264,7 +264,7 @@ L2: cache-controller@a02000 {
};
pcie: pcie@1ffc000 {
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
compatible = "fsl,imx6q-pcie";
reg = <0x01ffc000 0x04000>,
<0x01f00000 0x80000>;
reg-names = "dbi", "config";
......@@ -272,10 +272,9 @@ pcie: pcie@1ffc000 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */
<0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
......
arch/arm/boot/dts/imx6qp-prtwd3.dts
View file @ 8bd8822c
......@@ -123,7 +123,7 @@ &can1 {
};
&ecspi2 {
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
......@@ -189,7 +189,7 @@ fixed-link {
};
&ecspi3 {
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
......
arch/arm/boot/dts/imx6qp.dtsi
View file @ 8bd8822c
......@@ -110,5 +110,5 @@ &mmdc0 {
};
&pcie {
compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
compatible = "fsl,imx6qp-pcie";
};
arch/arm/boot/dts/imx6sl-tolino-vision5.dts 0 → 100644
View file @ 8bd8822c
// SPDX-License-Identifier: (GPL-2.0)
/*
* Device tree for the Tolino Vision 5 ebook reader
*
* Name on mainboard is: 37NB-E70K0M+6A3
* Serials start with: E70K02 (a number also seen in
* vendor kernel sources)
*
* This mainboard seems to be equipped with different SoCs.
* In the Tolino Vision 5 ebook reader it is a i.MX6SL
*
* Copyright 2021 Andreas Kemnade
* based on works
* Copyright 2016 Freescale Semiconductor, Inc.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "imx6sl.dtsi"
#include "e70k02.dtsi"
/ {
model = "Tolino Vision 5";
compatible = "kobo,tolino-vision5", "fsl,imx6sl";
};
&gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
};
&i2c1 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_sleep>;
};
&i2c2 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_sleep>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */
MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x17059 /* HALL_EN */
MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x79
MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x79
MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
>;
};
pinctrl_i2c1_sleep: i2c1grp-sleep {
fsl,pins = <
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
>;
};
pinctrl_i2c2_sleep: i2c2grp-sleep {
fsl,pins = <
MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x10059
>;
};
pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
fsl,pins = <
MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
>;
};
pinctrl_ricoh_gpio: ricoh-gpiogrp {
fsl,pins = <
MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */
MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */
MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
MX6SL_PAD_SD1_CLK__SD1_CLK 0x17059
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
MX6SL_PAD_SD1_CLK__SD1_CLK 0x170b9
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
>;
};
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
MX6SL_PAD_SD1_CLK__SD1_CLK 0x170f9
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
>;
};
pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
fsl,pins = <
MX6SL_PAD_SD1_CMD__SD1_CMD 0x10059
MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x10059
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x10059
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x10059
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x10059
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x10059
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x10059
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x10059
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x10059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
>;
};
pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
fsl,pins = <
MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
>;
};
pinctrl_wifi_power: wifi-powergrp {
fsl,pins = <
MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
>;
};
pinctrl_wifi_reset: wifi-resetgrp {
fsl,pins = <
MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
>;
};
};
&leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
};
&lm3630a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
};
&reg_wifi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_power>;
};
&reg_vdd1p1 {
vin-supply = <&dcdc2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&dcdc2_reg>;
};
&reg_arm {
vin-supply = <&dcdc3_reg>;
};
&reg_soc {
vin-supply = <&dcdc1_reg>;
};
&reg_pu {
vin-supply = <&dcdc1_reg>;
};
&ricoh619 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ricoh_gpio>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
pinctrl-3 = <&pinctrl_usdhc1_sleep>;
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
pinctrl-3 = <&pinctrl_usdhc3_sleep>;
};
&wifi_pwrseq {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_reset>;
};
arch/arm/boot/dts/imx6sl.dtsi
View file @ 8bd8822c
......@@ -55,18 +55,16 @@ cpu@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
operating-points = <
operating-points =
/* kHz uV */
996000 1275000
792000 1175000
396000 975000
>;
fsl,soc-operating-points = <
<996000 1275000>,
<792000 1175000>,
<396000 975000>;
fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
996000 1225000
792000 1175000
396000 1175000
>;
<996000 1225000>,
<792000 1175000>,
<396000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
......
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts 0 → 100644
View file @ 8bd8822c
// SPDX-License-Identifier: (GPL-2.0)
/*
* Device tree for the Kobo Libra H2O ebook reader
*
* Name on mainboard is: 37NB-E70K0M+6A3
* Serials start with: E70K02 (a number also seen in
* vendor kernel sources)
*
* This mainboard seems to be equipped with different SoCs.
* In the Kobo Libra H2O ebook reader it is an i.MX6SLL
*
* Copyright 2021 Andreas Kemnade
* based on works
* Copyright 2016 Freescale Semiconductor, Inc.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "imx6sll.dtsi"
#include "e70k02.dtsi"
/ {
model = "Kobo Libra H2O";
compatible = "kobo,librah2o", "fsl,imx6sll";
};
&clks {
assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
assigned-clock-rates = <393216000>;
};
&cpu0 {
arm-supply = <&dcdc3_reg>;
soc-supply = <&dcdc1_reg>;
};
&gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
};
&i2c1 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_sleep>;
};
&i2c2 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_sleep>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */
MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x17059 /* HALL_EN */
MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */
MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79
MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79
MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79
MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79
MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79
MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79
MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79
MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79
MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79
MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79
MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79
MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79
MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79
MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79
MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79
MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79
MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79
MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79
MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79
MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79
MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79
MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79
MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79
MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x79
MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x79
MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79
MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79
MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
>;
};
pinctrl_i2c1_sleep: i2c1grp-sleep {
fsl,pins = <
MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
>;
};
pinctrl_i2c2_sleep: i2c2grp-sleep {
fsl,pins = <
MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059
>;
};
pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
fsl,pins = <
MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */
>;
};
pinctrl_ricoh_gpio: ricoh-gpiogrp {
fsl,pins = <
MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */
MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */
MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x17059
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x17059
MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x17059
MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x17059
MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x17059
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170b9
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9
MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9
MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9
MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9
>;
};
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170f9
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9
MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9
MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9
MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9
>;
};
pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
fsl,pins = <
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x10059
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x10059
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x10059
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x10059
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x10059
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x10059
MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x10059
MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x10059
MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x10059
MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x10059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059
MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059
MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059
MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059
MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059
MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9
MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9
MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
>;
};
pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
fsl,pins = <
MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1
MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1
MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1
MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1
>;
};
pinctrl_wifi_power: wifi-powergrp {
fsl,pins = <
MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
>;
};
pinctrl_wifi_reset: wifi-resetgrp {
fsl,pins = <
MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */
>;
};
};
&leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
};
&lm3630a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
};
&reg_wifi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_power>;
};
&ricoh619 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ricoh_gpio>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
pinctrl-3 = <&pinctrl_usdhc1_sleep>;
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
pinctrl-3 = <&pinctrl_usdhc3_sleep>;
};
&wifi_pwrseq {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_reset>;
};
arch/arm/boot/dts/imx6sll.dtsi
View file @ 8bd8822c
......@@ -51,20 +51,18 @@ cpu0: cpu@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
operating-points =
/* kHz uV */
996000 1275000
792000 1175000
396000 1075000
198000 975000
>;
fsl,soc-operating-points = <
<996000 1275000>,
<792000 1175000>,
<396000 1075000>,
<198000 975000>;
fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
996000 1175000
792000 1175000
396000 1175000
198000 1175000
>;
<996000 1175000>,
<792000 1175000>,
<396000 1175000>,
<198000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
......
arch/arm/boot/dts/imx6sx.dtsi
View file @ 8bd8822c
......@@ -1395,15 +1395,15 @@ pwm8: pwm@22b0000 {
};
pcie: pcie@8ffc000 {
compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
compatible = "fsl,imx6sx-pcie";
reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */
<0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
......
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
View file @ 8bd8822c
......@@ -68,8 +68,11 @@ &gpmi {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
......@@ -147,6 +150,13 @@ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
>;
};
pinctrl_i2c1_gpio: i2cgpiogrp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
......
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
View file @ 8bd8822c
......@@ -191,6 +191,7 @@ &usdhc1 {
no-1-8-v;
keep-power-in-suspend;
wakeup-source;
disable-wp;
status = "disabled";
};
......
arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts 0 → 100644
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Copyright 2021 Toradex
*/
/dts-v1/;
#include "imx6ull-colibri-emmc-nonwifi.dtsi"
#include "imx6ull-colibri-eval-v3.dtsi"
/ {
model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
compatible = "toradex,colibri-imx6ull-emmc-eval",
"toradex,colibri-imx6ull-emmc",
"toradex,colibri-imx6ull",
"fsl,imx6ull";
};
arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi 0 → 100644
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Copyright 2021 Toradex
*/
#include "imx6ull-colibri.dtsi"
/ {
aliases {
mmc0 = &usdhc2; /* eMMC */
mmc1 = &usdhc1; /* MMC 4bit slot */
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
};
&gpio1 {
gpio-line-names = "SODIMM_8",
"SODIMM_6",
"SODIMM_129",
"SODIMM_89",
"SODIMM_19",
"SODIMM_21",
"UNUSABLE_SODIMM_180",
"UNUSABLE_SODIMM_184",
"SODIMM_4",
"SODIMM_2",
"SODIMM_106",
"SODIMM_71",
"SODIMM_23",
"SODIMM_31",
"SODIMM_99",
"SODIMM_102",
"SODIMM_33",
"SODIMM_35",
"SODIMM_25",
"SODIMM_27",
"SODIMM_36",
"SODIMM_38",
"SODIMM_32",
"SODIMM_34",
"SODIMM_135",
"SODIMM_77",
"SODIMM_100",
"SODIMM_186",
"SODIMM_196",
"SODIMM_194";
};
&gpio2 {
gpio-line-names = "SODIMM_55",
"SODIMM_63",
"SODIMM_178",
"SODIMM_188",
"SODIMM_73",
"SODIMM_30",
"SODIMM_67",
"SODIMM_104",
"",
"",
"",
"",
"",
"",
"",
"",
"SODIMM_190",
"SODIMM_47",
"SODIMM_192",
"SODIMM_49",
"SODIMM_51",
"SODIMM_53";
};
&gpio3 {
gpio-line-names = "SODIMM_56",
"SODIMM_44",
"SODIMM_68",
"SODIMM_82",
"",
"SODIMM_76",
"SODIMM_70",
"SODIMM_60",
"SODIMM_58",
"SODIMM_78",
"SODIMM_72",
"SODIMM_80",
"SODIMM_46",
"SODIMM_62",
"SODIMM_48",
"SODIMM_74",
"SODIMM_50",
"SODIMM_52",
"SODIMM_54",
"SODIMM_66",
"SODIMM_64",
"SODIMM_57",
"SODIMM_61",
"SODIMM_29",
"SODIMM_37",
"SODIMM_88",
"SODIMM_86",
"SODIMM_92",
"SODIMM_90";
};
&gpio4 {
gpio-line-names = "",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"SODIMM_140",
"SODIMM_59",
"SODIMM_142",
"SODIMM_144",
"SODIMM_133",
"SODIMM_146",
"SODIMM_28",
"SODIMM_75",
"SODIMM_96",
"SODIMM_81",
"SODIMM_94",
"SODIMM_101",
"SODIMM_103",
"SODIMM_79",
"SODIMM_97",
"SODIMM_69",
"SODIMM_98",
"SODIMM_85",
"SODIMM_65";
};
&gpio5 {
gpio-line-names = "SODIMM_43",
"SODIMM_45",
"SODIMM_137",
"SODIMM_95",
"SODIMM_107",
"SODIMM_131",
"SODIMM_93",
"",
"SODIMM_138",
"",
"SODIMM_105",
"SODIMM_127";
};
&gpmi {
status = "disabled";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
&pinctrl_gpmi_gpio>;
};
&iomuxc_snvs {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2emmc>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
bus-width = <8>;
keep-power-in-suspend;
no-1-8-v;
non-removable;
vmmc-supply = <&reg_module_3v3>;
status = "okay";
};
arch/arm/boot/dts/imx6ull-colibri.dtsi
View file @ 8bd8822c
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Copyright 2018 Toradex AG
* Copyright 2018-2021 Toradex
*/
#include "imx6ull.dtsi"
......@@ -345,6 +345,19 @@ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */
>;
};
/*
* With an eMMC instead of a raw NAND device the following pins
* are available at SODIMM pins
*/
pinctrl_gpmi_gpio: gpmi-gpio-grp {
fsl,pins = <
MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */
MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */
MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */
MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */
>;
};
pinctrl_gpmi_nand: gpmi-nand-grp {
fsl,pins = <
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
......@@ -533,6 +546,21 @@ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10
>;
};
pinctrl_usdhc2emmc: usdhc2emmcgrp {
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
>;
};
pinctrl_wdog: wdog-grp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
......
arch/arm/boot/dts/imx7-mba7.dtsi
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Device Tree Include file for TQ Systems MBa7 carrier board.
* Device Tree Include file for TQ-Systems MBa7 carrier board.
*
* Copyright (C) 2016 TQ Systems GmbH
* Copyright (C) 2016 TQ-Systems GmbH
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
* Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
*
......@@ -236,6 +236,44 @@ ethphy1_0: ethernet-phy@0 {
};
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot@0 {
label = "U-Boot";
reg = <0x0 0xd0000>;
};
env1@d0000 {
label = "ENV1";
reg = <0xd0000 0x10000>;
};
env2@e0000 {
label = "ENV2";
reg = <0xe0000 0x10000>;
};
dtb@f0000 {
label = "DTB";
reg = <0xf0000 0x10000>;
};
linux@100000 {
label = "Linux";
reg = <0x100000 0x700000>;
};
rootfs@800000 {
label = "RootFS";
reg = <0x800000 0x3800000>;
};
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
......
arch/arm/boot/dts/imx7-tqma7.dtsi
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
* Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
*
* Copyright (C) 2016 TQ Systems GmbH
* Copyright (C) 2016 TQ-Systems GmbH
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
* Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
*/
......@@ -19,6 +19,16 @@ &cpu0 {
cpu-supply = <&sw1a_reg>;
};
&gpio2 {
/* Configured as pullup by QSPI pin group */
qspi-reset-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_LOW>;
input;
line-name = "qspi-reset";
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
......@@ -160,6 +170,25 @@ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x4000005C
>;
};
pinctrl_qspi: qspigrp {
fsl,pins = <
MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A
MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A
MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A
MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A
MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11
MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54
MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54
>;
};
pinctrl_qspi_reset: qspi_resetgrp {
fsl,pins = <
/* #QSPI_RESET */
MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
......@@ -217,6 +246,20 @@ MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30
};
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
};
};
&sdma {
status = "okay";
};
......
arch/arm/boot/dts/imx7d-mba7.dts
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
* Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
*
* Copyright (C) 2016 TQ Systems GmbH
* Copyright (C) 2016 TQ-Systems GmbH
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
* Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
*/
......@@ -13,7 +13,7 @@
#include "imx7-mba7.dtsi"
/ {
model = "TQ Systems TQMa7D board on MBa7 carrier board";
model = "TQ-Systems TQMa7D board on MBa7 carrier board";
compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
};
......
arch/arm/boot/dts/imx7d-sdb.dts
View file @ 8bd8822c
......@@ -45,7 +45,7 @@ spi4 {
pinctrl-0 = <&pinctrl_spi4>;
gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx7d-tqma7.dtsi
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
* Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
*
* Copyright (C) 2016 TQ Systems GmbH
* Copyright (C) 2016 TQ-Systems GmbH
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
* Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
*/
......
arch/arm/boot/dts/imx7d.dtsi
View file @ 8bd8822c
......@@ -164,7 +164,7 @@ fec2: ethernet@30bf0000 {
};
pcie: pcie@33800000 {
compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
compatible = "fsl,imx7d-pcie";
reg = <0x33800000 0x4000>,
<0x4ff00000 0x80000>;
reg-names = "dbi", "config";
......@@ -172,10 +172,9 @@ pcie: pcie@33800000 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */
<0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
......
arch/arm/boot/dts/imx7s-mba7.dts
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
* Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
*
* Copyright (C) 2016 TQ Systems GmbH
* Copyright (C) 2016 TQ-Systems GmbH
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
* Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
*/
......@@ -13,6 +13,6 @@
#include "imx7-mba7.dtsi"
/ {
model = "TQ Systems TQMa7S board on MBa7 carrier board";
model = "TQ-Systems TQMa7S board on MBa7 carrier board";
compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
};
arch/arm/boot/dts/imx7s-tqma7.dtsi
View file @ 8bd8822c
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
* Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
*
* Copyright (C) 2016 TQ Systems GmbH
* Copyright (C) 2016 TQ-Systems GmbH
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
* Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
*/
......
arch/arm/boot/dts/ls1021a-qds.dts
View file @ 8bd8822c
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
* Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -67,19 +25,12 @@ sys_mclk: clock-mclk {
clock-frequency = <24576000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sound {
......@@ -231,9 +182,9 @@ &ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
0x2 0x0 0x0 0x7e800000 0x00010000
0x3 0x0 0x0 0x7fb00000 0x00000100>;
ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
<0x2 0x0 0x0 0x7e800000 0x00010000>,
<0x3 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
......@@ -254,7 +205,7 @@ nand@2,0 {
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
compatible = "simple-mfd";
reg = <0x3 0x0 0x0000100>;
bank-width = <1>;
device-width = <1>;
......@@ -328,6 +279,20 @@ tbi0: tbi-phy@8 {
};
};
&qspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
};
};
&sai2 {
status = "okay";
};
......
arch/arm/boot/dts/ls1021a-tsn.dts
View file @ 8bd8822c
......@@ -8,6 +8,7 @@
/ {
model = "NXP LS1021A-TSN Board";
compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
sys_mclk: clock-mclk {
compatible = "fixed-clock";
......@@ -136,7 +137,6 @@ &i2c0 {
/* 3 axis accelerometer */
accelerometer@1e {
compatible = "fsl,fxls8471";
position = <0>;
reg = <0x1e>;
};
......@@ -251,7 +251,7 @@ &qspi {
flash@0 {
/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
#address-cells = <1>;
#size-cells = <1>;
......
arch/arm/boot/dts/ls1021a-twr.dts
View file @ 8bd8822c
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
* Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -65,19 +23,12 @@ sys_mclk: clock-mclk {
clock-frequency = <24576000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sound {
......
arch/arm/boot/dts/ls1021a.dtsi
View file @ 8bd8822c
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7