Commit 8be8576f authored by Tony Lindgren's avatar Tony Lindgren

ARM: dts: Add missing hsi node for omap4

On omap4 we're missing the hsi node with it's related "ti,hwmods"
property that the SoC interconnect code needs.

Note that this will only show up as a bug with "doesn't have
mpu register target base" boot errors when the legacy platform
data is removed.

Let's also update the binding accrodingly while at it.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: default avatarSebastian Reichel <sre@kernel.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent d6e1a238
OMAP SSI controller bindings OMAP SSI controller bindings
OMAP Synchronous Serial Interface (SSI) controller implements a legacy OMAP3's Synchronous Serial Interface (SSI) controller implements a
variant of MIPI's High Speed Synchronous Serial Interface (HSI). legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
while the controller found inside OMAP4 is supposed to be fully compliant
with the HSI standard.
Required properties: Required properties:
- compatible: Should include "ti,omap3-ssi". - compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi"
- reg-names: Contains the values "sys" and "gdd" (in this order). - reg-names: Contains the values "sys" and "gdd" (in this order).
- reg: Contains a matching register specifier for each entry - reg: Contains a matching register specifier for each entry
in reg-names. in reg-names.
...@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device. ...@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
Required Port sub-node properties: Required Port sub-node properties:
- compatible: Should be set to the following value - compatible: Should be set to the following value
ti,omap3-ssi-port (applicable to OMAP34xx devices) ti,omap3-ssi-port (applicable to OMAP34xx devices)
ti,omap4-hsi-port (applicable to OMAP44xx devices)
- reg-names: Contains the values "tx" and "rx" (in this order). - reg-names: Contains the values "tx" and "rx" (in this order).
- reg: Contains a matching register specifier for each entry - reg: Contains a matching register specifier for each entry
in reg-names. in reg-names.
...@@ -38,6 +41,10 @@ Required Port sub-node properties: ...@@ -38,6 +41,10 @@ Required Port sub-node properties:
property. If it's missing the port will not be property. If it's missing the port will not be
enabled. enabled.
Optional properties:
- ti,hwmods: Shall contain TI interconnect module name if needed
by the SoC
Example for Nokia N900: Example for Nokia N900:
ssi-controller@48058000 { ssi-controller@48058000 {
......
...@@ -624,6 +624,40 @@ mmc5: mmc@480d5000 { ...@@ -624,6 +624,40 @@ mmc5: mmc@480d5000 {
dma-names = "tx", "rx"; dma-names = "tx", "rx";
}; };
hsi: hsi@4a058000 {
compatible = "ti,omap4-hsi";
reg = <0x4a058000 0x4000>,
<0x4a05c000 0x1000>;
reg-names = "sys", "gdd";
ti,hwmods = "hsi";
clocks = <&hsi_fck>;
clock-names = "hsi_fck";
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gdd_mpu";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a058000 0x4000>;
hsi_port1: hsi-port@2000 {
compatible = "ti,omap4-hsi-port";
reg = <0x2000 0x800>,
<0x2800 0x800>;
reg-names = "tx", "rx";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
hsi_port2: hsi-port@3000 {
compatible = "ti,omap4-hsi-port";
reg = <0x3000 0x800>,
<0x3800 0x800>;
reg-names = "tx", "rx";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
};
};
mmu_dsp: mmu@4a066000 { mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu"; compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>; reg = <0x4a066000 0x100>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment