selftests: forwarding: Add layer 2 miss test cases

Add test cases to verify that the bridge driver correctly marks layer 2
misses only when it should and that the flower classifier can match on
this metadata.

Example output:

 # ./tc_flower_l2_miss.sh
 TEST: L2 miss - Unicast                                             [ OK ]
 TEST: L2 miss - Multicast (IPv4)                                    [ OK ]
 TEST: L2 miss - Multicast (IPv6)                                    [ OK ]
 TEST: L2 miss - Link-local multicast (IPv4)                         [ OK ]
 TEST: L2 miss - Link-local multicast (IPv6)                         [ OK ]
 TEST: L2 miss - Broadcast                                           [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/testing/selftests/net/forwarding/Makefile

@@ -83,6 +83,7 @@ TEST_PROGS = bridge_igmp.sh \
 	tc_chains.sh \
 	tc_flower_router.sh \
 	tc_flower.sh \
+	tc_flower_l2_miss.sh \
 	tc_mpls_l2vpn.sh \
 	tc_police.sh \
 	tc_shblocks.sh \

tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                             +----------------------+
+# | H1 (vrf)              |                             | H2 (vrf)             |
+# |    + $h1              |                             |              $h2 +   |
+# |    | 192.0.2.1/28     |                             |     192.0.2.2/28 |   |
+# |    | 2001:db8:1::1/64 |                             | 2001:db8:1::2/64 |   |
+# +----|------------------+                             +------------------|---+
+#      |                                                                   |
+# +----|-------------------------------------------------------------------|---+
+# | SW |                                                                   |   |
+# |  +-|-------------------------------------------------------------------|-+ |
+# |  | + $swp1                       BR                              $swp2 + | |
+# |  +-----------------------------------------------------------------------+ |
+# +----------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_l2_miss_unicast
+	test_l2_miss_multicast
+	test_l2_miss_ll_multicast
+	test_l2_miss_broadcast
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+test_l2_miss_unicast()
+{
+	local dmac=00:01:02:03:04:05
+	local dip=192.0.2.2
+	local sip=192.0.2.1
+
+	RET=0
+
+	# Unknown unicast.
+	tc filter add dev $swp2 egress protocol ipv4 handle 101 pref 1 \
+	   flower indev $swp1 l2_miss true dst_mac $dmac src_ip $sip \
+	   dst_ip $dip action pass
+	# Known unicast.
+	tc filter add dev $swp2 egress protocol ipv4 handle 102 pref 1 \
+	   flower indev $swp1 l2_miss false dst_mac $dmac src_ip $sip \
+	   dst_ip $dip action pass
+
+	# Before adding FDB entry.
+	$MZ $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unknown unicast filter was not hit before adding FDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 0
+	check_err $? "Known unicast filter was hit before adding FDB entry"
+
+	# Adding FDB entry.
+	bridge fdb replace $dmac dev $swp2 master static
+
+	$MZ $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unknown unicast filter was hit after adding FDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Known unicast filter was not hit after adding FDB entry"
+
+	# Deleting FDB entry.
+	bridge fdb del $dmac dev $swp2 master static
+
+	$MZ $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 2
+	check_err $? "Unknown unicast filter was not hit after deleting FDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Known unicast filter was hit after deleting FDB entry"
+
+	tc filter del dev $swp2 egress protocol ipv4 pref 1 handle 102 flower
+	tc filter del dev $swp2 egress protocol ipv4 pref 1 handle 101 flower
+
+	log_test "L2 miss - Unicast"
+}
+
+test_l2_miss_multicast_common()
+{
+	local proto=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local mode=$1; shift
+	local name=$1; shift
+
+	RET=0
+
+	# Unregistered multicast.
+	tc filter add dev $swp2 egress protocol $proto handle 101 pref 1 \
+	   flower indev $swp1 l2_miss true src_ip $sip dst_ip $dip \
+	   action pass
+	# Registered multicast.
+	tc filter add dev $swp2 egress protocol $proto handle 102 pref 1 \
+	   flower indev $swp1 l2_miss false src_ip $sip dst_ip $dip \
+	   action pass
+
+	# Before adding MDB entry.
+	$MZ $mode $h1 -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unregistered multicast filter was not hit before adding MDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 0
+	check_err $? "Registered multicast filter was hit before adding MDB entry"
+
+	# Adding MDB entry.
+	bridge mdb replace dev br1 port $swp2 grp $dip permanent
+
+	$MZ $mode $h1 -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unregistered multicast filter was hit after adding MDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Registered multicast filter was not hit after adding MDB entry"
+
+	# Deleting MDB entry.
+	bridge mdb del dev br1 port $swp2 grp $dip
+
+	$MZ $mode $h1 -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 2
+	check_err $? "Unregistered multicast filter was not hit after deleting MDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Registered multicast filter was hit after deleting MDB entry"
+
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 102 flower
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 101 flower
+
+	log_test "L2 miss - Multicast ($name)"
+}
+
+test_l2_miss_multicast_ipv4()
+{
+	local proto="ipv4"
+	local sip=192.0.2.1
+	local dip=239.1.1.1
+	local mode="-4"
+	local name="IPv4"
+
+	test_l2_miss_multicast_common $proto $sip $dip $mode $name
+}
+
+test_l2_miss_multicast_ipv6()
+{
+	local proto="ipv6"
+	local sip=2001:db8:1::1
+	local dip=ff0e::1
+	local mode="-6"
+	local name="IPv6"
+
+	test_l2_miss_multicast_common $proto $sip $dip $mode $name
+}
+
+test_l2_miss_multicast()
+{
+	# Configure $swp2 as a multicast router port so that it will forward
+	# both registered and unregistered multicast traffic.
+	bridge link set dev $swp2 mcast_router 2
+
+	# Forwarding according to MDB entries only takes place when the bridge
+	# detects that there is a valid querier in the network. Set the bridge
+	# as the querier and assign it a valid IPv6 link-local address to be
+	# used as the source address for MLD queries.
+	ip link set dev br1 type bridge mcast_querier 1
+	ip -6 address add fe80::1/64 nodad dev br1
+	# Wait the default Query Response Interval (10 seconds) for the bridge
+	# to determine that there are no other queriers in the network.
+	sleep 10
+
+	test_l2_miss_multicast_ipv4
+	test_l2_miss_multicast_ipv6
+
+	ip -6 address del fe80::1/64 dev br1
+	ip link set dev br1 type bridge mcast_querier 0
+	bridge link set dev $swp2 mcast_router 1
+}
+
+test_l2_miss_multicast_common2()
+{
+	local name=$1; shift
+	local dmac=$1; shift
+	local dip=224.0.0.1
+	local sip=192.0.2.1
+
+}
+
+test_l2_miss_ll_multicast_common()
+{
+	local proto=$1; shift
+	local dmac=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local mode=$1; shift
+	local name=$1; shift
+
+	RET=0
+
+	tc filter add dev $swp2 egress protocol $proto handle 101 pref 1 \
+	   flower indev $swp1 l2_miss true dst_mac $dmac src_ip $sip \
+	   dst_ip $dip action pass
+
+	$MZ $mode $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Filter was not hit"
+
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 101 flower
+
+	log_test "L2 miss - Link-local multicast ($name)"
+}
+
+test_l2_miss_ll_multicast_ipv4()
+{
+	local proto=ipv4
+	local dmac=01:00:5e:00:00:01
+	local sip=192.0.2.1
+	local dip=224.0.0.1
+	local mode="-4"
+	local name="IPv4"
+
+	test_l2_miss_ll_multicast_common $proto $dmac $sip $dip $mode $name
+}
+
+test_l2_miss_ll_multicast_ipv6()
+{
+	local proto=ipv6
+	local dmac=33:33:00:00:00:01
+	local sip=2001:db8:1::1
+	local dip=ff02::1
+	local mode="-6"
+	local name="IPv6"
+
+	test_l2_miss_ll_multicast_common $proto $dmac $sip $dip $mode $name
+}
+
+test_l2_miss_ll_multicast()
+{
+	test_l2_miss_ll_multicast_ipv4
+	test_l2_miss_ll_multicast_ipv6
+}
+
+test_l2_miss_broadcast()
+{
+	local dmac=ff:ff:ff:ff:ff:ff
+	local smac=00:01:02:03:04:05
+
+	RET=0
+
+	tc filter add dev $swp2 egress protocol all handle 101 pref 1 \
+	   flower l2_miss true dst_mac $dmac src_mac $smac \
+	   action pass
+	tc filter add dev $swp2 egress protocol all handle 102 pref 1 \
+	   flower l2_miss false dst_mac $dmac src_mac $smac \
+	   action pass
+
+	$MZ $h1 -a $smac -b $dmac -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 0
+	check_err $? "L2 miss filter was hit when should not"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "L2 no miss filter was not hit when should"
+
+	tc filter del dev $swp2 egress protocol all pref 1 handle 102 flower
+	tc filter del dev $swp2 egress protocol all pref 1 handle 101 flower
+
+	log_test "L2 miss - Broadcast"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS