Commit 8c41b3d7 authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Geert Uytterhoeven

arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board support

Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on
r8a774a1 SoC.
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarMarian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent faf1ce7f
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \
r8a774a1-hihope-rzg2m-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
......
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a774a1.dtsi"
#include "hihope-rev4.dtsi"
/ {
model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x78000000>;
};
memory@600000000 {
device_type = "memory";
reg = <0x6 0x00000000 0x0 0x80000000>;
};
};
&du {
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&versaclock5 1>,
<&x302_clk>,
<&versaclock5 2>;
clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
......@@ -10,6 +10,8 @@
#include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
#include <dt-bindings/power/r8a774a1-sysc.h>
#define CPG_AUDIO_CLK_I R8A774A1_CLK_S0D4
/ {
compatible = "renesas,r8a774a1";
#address-cells = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment