Commit 8c4f2bbd authored by Dave Airlie's avatar Dave Airlie Committed by Alex Deucher

drm/radeon: add support for SET_APPEND_CNT packet3 (v2)

This adds support to the command parser for the set append counter
packet3, this is required to support atomic counters on
evergreen/cayman GPUs.

v2: fixup some of the hardcoded numbers with real register names
(Christian)
Reviewed-by: default avatarChristian König <christian.koenig@amd.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 8b2cf4f5
......@@ -2608,6 +2608,51 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p,
}
}
break;
case PACKET3_SET_APPEND_CNT:
{
uint32_t areg;
uint32_t allowed_reg_base;
uint32_t source_sel;
if (pkt->count != 2) {
DRM_ERROR("bad SET_APPEND_CNT (invalid count)\n");
return -EINVAL;
}
allowed_reg_base = GDS_APPEND_COUNT_0;
allowed_reg_base -= PACKET3_SET_CONTEXT_REG_START;
allowed_reg_base >>= 2;
areg = idx_value >> 16;
if (areg < allowed_reg_base || areg > (allowed_reg_base + 11)) {
dev_warn(p->dev, "forbidden register for append cnt 0x%08x at %d\n",
areg, idx);
return -EINVAL;
}
source_sel = G_PACKET3_SET_APPEND_CNT_SRC_SELECT(idx_value);
if (source_sel == PACKET3_SAC_SRC_SEL_MEM) {
uint64_t offset;
uint32_t swap;
r = radeon_cs_packet_next_reloc(p, &reloc, 0);
if (r) {
DRM_ERROR("bad SET_APPEND_CNT (missing reloc)\n");
return -EINVAL;
}
offset = radeon_get_ib_value(p, idx + 1);
swap = offset & 0x3;
offset &= ~0x3;
offset += ((u64)(radeon_get_ib_value(p, idx + 2) & 0xff)) << 32;
offset += reloc->gpu_offset;
ib[idx+1] = (offset & 0xfffffffc) | swap;
ib[idx+2] = upper_32_bits(offset) & 0xff;
} else {
DRM_ERROR("bad SET_APPEND_CNT (unsupported operation)\n");
return -EINVAL;
}
break;
}
case PACKET3_NOP:
break;
default:
......
......@@ -1689,6 +1689,36 @@
#define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73
#define PACKET3_SET_RESOURCE_INDIRECT 0x74
#define PACKET3_SET_APPEND_CNT 0x75
/* SET_APPEND_CNT - documentation
* 1. header
* 2. COMMAND
* 1:0 - SOURCE SEL
* 15:2 - Reserved
* 31:16 - WR_REG_OFFSET - context register to write source data to.
* (one of R_02872C_GDS_APPEND_COUNT_0-11)
* 3. CONTROL
* (for source == mem)
* 31:2 SRC_ADDRESS_LO
* 0:1 SWAP
* (for source == GDS)
* 31:0 GDS offset
* (for source == DATA)
* 31:0 DATA
* (for source == REG)
* 31:0 REG
* 4. SRC_ADDRESS_HI[7:0]
* kernel driver 2.44 only supports SRC == MEM.
*/
#define PACKET3_SET_APPEND_CNT_SRC_SELECT(x) ((x) << 0)
#define G_PACKET3_SET_APPEND_CNT_SRC_SELECT(x) ((x & 0x3) >> 0)
/* source is from the data in CONTROL */
#define PACKET3_SAC_SRC_SEL_DATA 0x0
/* source is from register */
#define PACKET3_SAC_SRC_SEL_REG 0x1
/* source is from GDS offset in CONTROL */
#define PACKET3_SAC_SRC_SEL_GDS 0x2
/* source is from memory address */
#define PACKET3_SAC_SRC_SEL_MEM 0x3
#define SQ_RESOURCE_CONSTANT_WORD7_0 0x3001c
#define S__SQ_CONSTANT_TYPE(x) (((x) & 3) << 30)
......@@ -2005,6 +2035,19 @@
#define GDS_ADDR_BASE 0x28720
#define GDS_APPEND_COUNT_0 0x2872C
#define GDS_APPEND_COUNT_1 0x28730
#define GDS_APPEND_COUNT_2 0x28734
#define GDS_APPEND_COUNT_3 0x28738
#define GDS_APPEND_COUNT_4 0x2873C
#define GDS_APPEND_COUNT_5 0x28740
#define GDS_APPEND_COUNT_6 0x28744
#define GDS_APPEND_COUNT_7 0x28748
#define GDS_APPEND_COUNT_8 0x2874c
#define GDS_APPEND_COUNT_9 0x28750
#define GDS_APPEND_COUNT_10 0x28754
#define GDS_APPEND_COUNT_11 0x28758
#define CB_IMMED0_BASE 0x28b9c
#define CB_IMMED1_BASE 0x28ba0
#define CB_IMMED2_BASE 0x28ba4
......
......@@ -93,9 +93,10 @@
* 2.41.0 - evergreen/cayman: Add SET_BASE/DRAW_INDIRECT command parsing support
* 2.42.0 - Add VCE/VUI (Video Usability Information) support
* 2.43.0 - RADEON_INFO_GPU_RESET_COUNTER
* 2.44.0 - SET_APPEND_CNT packet3 support
*/
#define KMS_DRIVER_MAJOR 2
#define KMS_DRIVER_MINOR 43
#define KMS_DRIVER_MINOR 44
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment