Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Most of the commits are for defconfig changes, to enable newly added
  drivers or features that people have started using. For the changed
  lines lines, we have mostly cleanups, the affected platforms are OMAP,
  Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.

  The largest single change is the introduction of the TI "sysc" bus
  driver, with the intention of cleaning up more legacy code.

  Two new SoC platforms get added this time:

   - Allwinner R40 is a modernized version of the A20 chip, now with a
     Quad-Core ARM Cortex-A7. According to the manufacturer, it is
     intended for "Smart Hardware"

   - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
     chips meant for managed gigabit ethernet switches, based around a
     Cortex-A9 CPU.

  Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
  Amlogic Meson8/8b, which were previously added but only supported
  uniprocessor operation"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
  ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
  arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: defconfig: select the right SX150X driver
  arm64: defconfig: Enable QCOM_IOMMU
  arm64: Add ThunderX drivers to defconfig
  arm64: defconfig: Enable Tegra PCI controller
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  arm64: defconfig: re-enable Qualcomm DB410c USB
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ...

Documentation/arm/sunxi/README

@@ -33,6 +33,11 @@ SunXi family
 
       - Next Thing Co GR8 (sun5i)
 
+    * Single ARM Cortex-A7 based SoCs
+      - Allwinner V3s (sun8i)
+        + Datasheet
+          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+
     * Dual ARM Cortex-A7 based SoCs
       - Allwinner A20 (sun7i)
         + User Manual
@@ -71,9 +76,11 @@ SunXi family
         + Datasheet
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
 
-      - Allwinner V3s (sun8i)
+      - Allwinner R40 (sun8i)
         + Datasheet
-          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+          https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf
+        + User Manual
+          https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
 
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80

Documentation/devicetree/bindings/arm/amlogic/pmu.txt

+Amlogic Meson8 and Meson8b power-management-unit:
+-------------------------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : depending on the SoC this should be one of:
+			"amlogic,meson8-pmu"
+			"amlogic,meson8b-pmu"
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	pmu@c81000e4 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xc81000e0 0x18>;
+	};

Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt

+Amlogic Meson8 and Meson8b SRAM for smp bringup:
+------------------------------------------------
+
+Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores.
+Once the core gets powered up it executes the code that is residing at a
+specific location.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : depending on the SoC this should be one of:
+		"amlogic,meson8-smp-sram"
+		"amlogic,meson8b-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+	sram: sram@d9000000 {
+		compatible = "mmio-sram";
+		reg = <0xd9000000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd9000000 0x20000>;
+
+		smp-sram@1ff80 {
+			compatible = "amlogic,meson8b-smp-sram";
+			reg = <0x1ff80 0x8>;
+		};
+	};

Documentation/devicetree/bindings/arm/cpus.txt

@@ -197,6 +197,8 @@ described below.
 			    "actions,s500-smp"
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
+			    "amlogic,meson8-smp"
+			    "amlogic,meson8b-smp"
 			    "arm,realview-smp"
 			    "brcm,bcm11351-cpu-method"
 			    "brcm,bcm23550"

Documentation/devicetree/bindings/arm/omap/ctrl.txt

@@ -21,6 +21,8 @@ Required properties:
 		"ti,omap3-scm"
 		"ti,omap4-scm-core"
 		"ti,omap4-scm-padconf-core"
+		"ti,omap4-scm-wkup"
+		"ti,omap4-scm-padconf-wkup"
 		"ti,omap5-scm-core"
 		"ti,omap5-scm-padconf-core"
 		"ti,dra7-scm-core"

Documentation/devicetree/bindings/arm/sunxi.txt

@@ -14,6 +14,8 @@ using one of the following compatible strings:
   allwinner,sun8i-a83t
   allwinner,sun8i-h2-plus
   allwinner,sun8i-h3
+  allwinner-sun8i-r40
+  allwinner,sun8i-v3s
   allwinner,sun9i-a80
   allwinner,sun50i-a64
   nextthing,gr8

Documentation/devicetree/bindings/bus/ti-sysc.txt

+Texas Instruments sysc interconnect target module wrapper binding
+
+Texas Instruments SoCs can have a generic interconnect target module
+hardware for devices connected to various interconnects such as L3
+interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
+is mostly used for interaction between module and PRCM. It participates
+in the OCP Disconnect Protocol but other than that is mostly independent
+of the interconnect.
+
+Each interconnect target module can have one or more devices connected to
+it. There is a set of control registers for managing interconnect target
+module clocks, idle modes and interconnect level resets for the module.
+
+These control registers are sprinkled into the unused register address
+space of the first child device IP block managed by the interconnect
+target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
+
+Required standard properties:
+
+- compatible	shall be one of the following generic types:
+
+		"ti,sysc-omap2"
+		"ti,sysc-omap4"
+		"ti,sysc-omap4-simple"
+
+		or one of the following derivative types for hardware
+		needing special workarounds:
+
+		"ti,sysc-omap3430-sr"
+		"ti,sysc-omap3630-sr"
+		"ti,sysc-omap4-sr"
+		"ti,sysc-omap3-sham"
+		"ti,sysc-omap-aes"
+		"ti,sysc-mcasp"
+		"ti,sysc-usb-host-fs"
+
+- reg		shall have register areas implemented for the interconnect
+		target module in question such as revision, sysc and syss
+
+- reg-names	shall contain the register names implemented for the
+		interconnect target module in question such as
+		"rev, "sysc", and "syss"
+
+- ranges	shall contain the interconnect target module IO range
+		available for one or more child device IP blocks managed
+		by the interconnect target module, the ranges may include
+		multiple ranges such as device L4 range for control and
+		parent L3 range for DMA access
+
+Optional properties:
+
+- clocks	clock specifier for each name in the clock-names as
+		specified in the binding documentation for ti-clkctrl,
+		typically available for all interconnect targets on TI SoCs
+		based on omap4 except if it's read-only register in hwauto
+		mode as for example omap4 L4_CFG_CLKCTRL
+
+- clock-names	should contain at least "fck", and optionally also "ick"
+		depending on the SoC and the interconnect target module
+
+- ti,hwmods	optional TI interconnect module name to use legacy
+		hwmod platform data
+
+
+Example: Single instance of MUSB controller on omap4 using interconnect ranges
+using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
+
+	target-module@2b000 {		/* 0x4a0ab000, ap 84 12.0 */
+		compatible = "ti,sysc-omap2";
+		ti,hwmods = "usb_otg_hs";
+		reg = <0x2b400 0x4>,
+		      <0x2b404 0x4>,
+		      <0x2b408 0x4>;
+		reg-names = "rev", "sysc", "syss";
+		clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x2b000 0x1000>;
+
+		usb_otg_hs: otg@0 {
+			compatible = "ti,omap4-musb";
+			reg = <0x0 0x7ff>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			usb-phy = <&usb2_phy>;
+			...
+		};
+	};
+
+Note that other SoCs, such as am335x can have multipe child devices. On am335x
+there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
+instance as children of a single interconnet target module.

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it.
 
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
-  is the IP revision of the specific EMIF instance.
-		  For am437x should be ti,emif-am4372.
+  is the IP revision of the specific EMIF instance. For newer controllers,
+  compatible should be one of the following:
+  	     "ti,emif-am3352"
+	     "ti,emif-am4372"
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the
   allowed values

Documentation/devicetree/bindings/power/ti-smartreflex.txt

+Texas Instruments SmartReflex binding
+
+SmartReflex is used to set and adjust the SoC operating points.
+
+
+Required properties:
+
+compatible: Shall be one of the following:
+	    "ti,omap3-smartreflex-core"
+	    "ti,omap3-smartreflex-iva"
+	    "ti,omap4-smartreflex-core"
+	    "ti,omap4-smartreflex-mpu"
+	    "ti,omap4-smartreflex-iva"
+
+reg: Shall contain the device instance IO range
+
+interrupts: Shall contain the device instance interrupt
+
+
+Optional properties:
+
+ti,hwmods: Shall contain the TI interconnect module name if needed
+	   by the SoC
+
+
+Example:
+
+	smartreflex_iva: smartreflex@4a0db000 {
+		compatible = "ti,omap4-smartreflex-iva";
+		reg = <0x4a0db000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_iva";
+	};
+
+	smartreflex_core: smartreflex@4a0dd000 {
+		compatible = "ti,omap4-smartreflex-core";
+		reg = <0x4a0dd000 0x80>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_core";
+	};
+
+	smartreflex_mpu: smartreflex@4a0d9000 {
+		compatible = "ti,omap4-smartreflex-mpu";
+		reg = <0x4a0d9000 0x80>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_mpu";
+	};

MAINTAINERS

@@ -2162,7 +2162,6 @@ F:	sound/soc/zte/
 
 ARM/ZYNQ ARCHITECTURE
 M:	Michal Simek <michal.simek@xilinx.com>
-R:	Sören Brinkmann <soren.brinkmann@xilinx.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://wiki.xilinx.com
 T:	git https://github.com/Xilinx/linux-xlnx.git
@@ -2937,6 +2936,7 @@ N:	bcm583*
 N:	bcm585*
 N:	bcm586*
 N:	bcm88312
+N:	hr2
 F:	arch/arm64/boot/dts/broadcom/ns2*
 F:	drivers/clk/bcm/clk-ns*
 F:	drivers/pinctrl/bcm/pinctrl-ns*

arch/arm/Kconfig

@@ -371,7 +371,7 @@ config ARCH_EBSA110
 
 config ARCH_EP93XX
 	bool "EP93xx-based"
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_SPARSEMEM_ENABLE
 	select ARM_AMBA
 	imply ARM_PATCH_PHYS_VIRT
 	select ARM_VIC

arch/arm/Kconfig.debug

@@ -170,6 +170,11 @@ choice
 		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
+	config DEBUG_BCM_HR2
+		bool "Kernel low-level debugging on Hurricane 2 UART2"
+		depends on ARCH_BCM_HR2
+		select DEBUG_UART_8250
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
 		depends on ARCH_BCM_MOBILE
@@ -912,6 +917,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF2 on Renesas R-Car E2 (R8A7794).
 
+	config DEBUG_RCAR_GEN2_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+		depends on ARCH_R8A7745
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/G1E (R8A7745).
+
 	config DEBUG_RMOBILE_SCIFA0
 		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
 		depends on ARCH_R8A73A4
@@ -1452,6 +1464,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
@@ -1509,6 +1522,7 @@ config DEBUG_UART_PHYS
 	default 0x11009000 if DEBUG_MT8135_UART3
 	default 0x16000000 if DEBUG_INTEGRATOR
 	default 0x18000300 if DEBUG_BCM_5301X
+	default 0x18000400 if DEBUG_BCM_HR2
 	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
 	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1571,6 +1585,7 @@ config DEBUG_UART_PHYS
 	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
 	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
@@ -1605,6 +1620,7 @@ config DEBUG_UART_PHYS
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
+		DEBUG_RCAR_GEN2_SCIF4 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
@@ -1624,6 +1640,7 @@ config DEBUG_UART_VIRT
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
 	default 0xf1000300 if DEBUG_BCM_5301X
+	default 0xf1000400 if DEBUG_BCM_HR2
 	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
 	default 0xf1009000 if DEBUG_MT8135_UART3
@@ -1729,7 +1746,8 @@ config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
+		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
+		DEBUG_OMAP7XXUART3
 	default 2
 
 config DEBUG_UART_8250_WORD

arch/arm/Makefile

@@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000
 endif
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically

arch/arm/boot/dts/am33xx.dtsi

@@ -130,9 +130,11 @@ oppnitro-1000000000 {
 		};
 	};
 
-	pmu {
+	pmu@4b000000 {
 		compatible = "arm,cortex-a8-pmu";
 		interrupts = <3>;
+		reg = <0x4b000000 0x1000000>;
+		ti,hwmods = "debugss";
 	};
 
 	/*
@@ -929,6 +931,12 @@ am335x_adc: adc {
 			};
 		};
 
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am3352";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";

arch/arm/boot/dts/dra7.dtsi

@@ -457,6 +457,7 @@ sdma: dma-controller@4a056000 {
 			#dma-cells = <1>;
 			dma-channels = <32>;
 			dma-requests = <127>;
+			ti,hwmods = "dma_system";
 		};
 
 		edma: edma@43300000 {
@@ -1069,6 +1070,13 @@ mmc1: mmc@4809c000 {
 			max-frequency = <192000000>;
 		};
 
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "hdq1w";
+		};
+
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480b4000 0x400>;
@@ -1489,6 +1497,32 @@ usb3_phy1: phy@4a084400 {
 			};
 		};
 
+		target-module@4a0dd000 {
+			compatible = "ti,sysc-omap4-sr";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x4a0dd000 0x4>,
+			      <0x4a0dd008 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a0dd000 0x001000>;
+
+			/* SmartReflex child device marked reserved in TRM */
+		};
+
+		target-module@4a0d9000 {
+			compatible = "ti,sysc-omap4-sr";
+			ti,hwmods = "smartreflex_mpu";
+			reg = <0x4a0d9000 0x4>,
+			      <0x4a0d9008 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a0d9000 0x001000>;
+
+			/* SmartReflex child device marked reserved in TRM */
+		};
+
 		omap_dwc3_1: omap_dwc3_1@48880000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss1";

arch/arm/boot/dts/omap3.dtsi

@@ -215,6 +215,7 @@ sdma: dma-controller@48056000 {
 			#dma-cells = <1>;
 			dma-channels = <32>;
 			dma-requests = <96>;
+			ti,hwmods = "dma";
 		};
 
 		gpio1: gpio@48310000 {

arch/arm/boot/dts/omap4.dtsi

@@ -51,6 +51,17 @@ cpu@1 {
 		};
 	};
 
+	/*
+	 * Note that 4430 needs cross trigger interface (CTI) supported
+	 * before we can configure the interrupts. This means sampling
+	 * events are not supported for pmu. Note that 4460 does not use
+	 * CTI, see also 4460.dtsi.
+	 */
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		ti,hwmods = "debugss";
+	};
+
 	gic: interrupt-controller@48241000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
@@ -163,6 +174,7 @@ omap4_scm_core: scm@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x2000 0x1000>;
+				ti,hwmods = "ctrl_module_core";
 
 				scm_conf: scm_conf@0 {
 					compatible = "syscon";
@@ -175,9 +187,11 @@ scm_conf: scm_conf@0 {
 			omap4_padconf_core: scm@100000 {
 				compatible = "ti,omap4-scm-padconf-core",
 					     "simple-bus";
+				reg = <0x100000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x100000 0x1000>;
+				ti,hwmods = "ctrl_module_pad_core";
 
 				omap4_pmx_core: pinmux@40 {
 					compatible = "ti,omap4-padconf",
@@ -252,17 +266,33 @@ scrm_clockdomains: clockdomains {
 					};
 				};
 
-				omap4_pmx_wkup: pinmux@1e040 {
-					compatible = "ti,omap4-padconf",
-						     "pinctrl-single";
-					reg = <0x1e040 0x0038>;
+				omap4_scm_wkup: scm@c000 {
+					compatible = "ti,omap4-scm-wkup";
+					reg = <0xc000 0x1000>;
+					ti,hwmods = "ctrl_module_wkup";
+				};
+
+				omap4_padconf_wkup: padconf@1e000 {
+					compatible = "ti,omap4-scm-padconf-wkup",
+						     "simple-bus";
+					reg = <0x1e000 0x1000>;
 					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <16>;
-					pinctrl-single,function-mask = <0x7fff>;
+					#size-cells = <1>;
+					ranges = <0 0x1e000 0x1000>;
+					ti,hwmods = "ctrl_module_pad_wkup";
+
+					omap4_pmx_wkup: pinmux@40 {
+						compatible = "ti,omap4-padconf",
+							     "pinctrl-single";
+						reg = <0x40 0x0038>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#pinctrl-cells = <1>;
+						#interrupt-cells = <1>;
+						interrupt-controller;
+						pinctrl-single,register-width = <16>;
+						pinctrl-single,function-mask = <0x7fff>;
+					};
 				};
 			};
 		};
@@ -282,6 +312,7 @@ sdma: dma-controller@4a056000 {
 			#dma-cells = <1>;
 			dma-channels = <32>;
 			dma-requests = <127>;
+			ti,hwmods = "dma_system";
 		};
 
 		gpio1: gpio@4a310000 {
@@ -351,6 +382,19 @@ gpio6: gpio@4805d000 {
 			#interrupt-cells = <2>;
 		};
 
+		target-module@48076000 {
+			compatible = "ti,sysc-omap4";
+			ti,hwmods = "slimbus2";
+			reg = <0x48076000 0x4>,
+			      <0x48076010 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48076000 0x001000>;
+
+			/* No child device binding or driver in mainline */
+		};
+
 		elm: elm@48078000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48078000 0x2000>;
@@ -411,6 +455,57 @@ uart4: serial@4806e000 {
 			clock-frequency = <48000000>;
 		};
 
+		target-module@4a0db000 {
+			compatible = "ti,sysc-sr";
+			ti,hwmods = "smartreflex_iva";
+			reg = <0x4a0db000 0x4>,
+			      <0x4a0db008 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a0db000 0x001000>;
+
+			smartreflex_iva: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-iva";
+				reg = <0 0x80>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@4a0dd000 {
+			compatible = "ti,sysc-sr";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x4a0dd000 0x4>,
+			      <0x4a0dd008 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a0dd000 0x001000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-core";
+				reg = <0 0x80>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@4a0d9000 {
+			compatible = "ti,sysc-sr";
+			ti,hwmods = "smartreflex_mpu";
+			reg = <0x4a0d9000 0x4>,
+			      <0x4a0d9008 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a0d9000 0x001000>;
+
+			smartreflex_mpu: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-mpu";
+				reg = <0 0x80>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		hwspinlock: spinlock@4a0f6000 {
 			compatible = "ti,omap4-hwspinlock";
 			reg = <0x4a0f6000 0x1000>;
@@ -489,6 +584,13 @@ mcspi2: spi@4809a000 {
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 		};
 
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "hdq1w";
+		};
+
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480b8000 0x200>;
@@ -565,6 +667,40 @@ mmc5: mmc@480d5000 {
 			dma-names = "tx", "rx";
 		};
 
+		hsi: hsi@4a058000 {
+			compatible = "ti,omap4-hsi";
+			reg = <0x4a058000 0x4000>,
+			      <0x4a05c000 0x1000>;
+			reg-names = "sys", "gdd";
+			ti,hwmods = "hsi";
+
+			clocks = <&hsi_fck>;
+			clock-names = "hsi_fck";
+
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a058000 0x4000>;
+
+			hsi_port1: hsi-port@2000 {
+				compatible = "ti,omap4-hsi-port";
+				reg = <0x2000 0x800>,
+				      <0x2800 0x800>;
+				reg-names = "tx", "rx";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			hsi_port2: hsi-port@3000 {
+				compatible = "ti,omap4-hsi-port";
+				reg = <0x3000 0x800>,
+				      <0x3800 0x800>;
+				reg-names = "tx", "rx";
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		mmu_dsp: mmu@4a066000 {
 			compatible = "ti,omap4-iommu";
 			reg = <0x4a066000 0x100>;
@@ -573,6 +709,19 @@ mmu_dsp: mmu@4a066000 {
 			#iommu-cells = <0>;
 		};
 
+		target-module@52000000 {
+			compatible = "ti,sysc-omap4";
+			ti,hwmods = "iss";
+			reg = <0x52000000 0x4>,
+			      <0x52000010 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x52000000 0x1000000>;
+
+			/* No child device binding, driver in staging */
+		};
+
 		mmu_ipu: mmu@55082000 {
 			compatible = "ti,omap4-iommu";
 			reg = <0x55082000 0x100>;
@@ -589,6 +738,14 @@ wdt2: wdt@4a314000 {
 			ti,hwmods = "wd_timer2";
 		};
 
+		wdt3: wdt@40130000 {
+			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+			reg = <0x40130000 0x80>, /* MPU private access */
+			      <0x49030000 0x80>; /* L3 Interconnect */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer3";
+		};
+
 		mcpdm: mcpdm@40132000 {
 			compatible = "ti,omap4-mcpdm";
 			reg = <0x40132000 0x7f>, /* MPU private access */
@@ -659,6 +816,56 @@ mcbsp3: mcbsp@40126000 {
 			status = "disabled";
 		};
 
+		target-module@40128000 {
+			compatible = "ti,sysc-mcasp";
+			ti,hwmods = "mcasp";
+			reg = <0x40128004 0x4>;
+			reg-names = "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
+				 <0x49028000 0x49028000 0x1000>; /* L3 */
+
+			/*
+			 * Child device unsupported by davinci-mcasp. At least
+			 * TX path is disabled for omap4, and only DIT mode
+			 * works with no I2S. See also old Android kernel
+			 * omap-mcasp driver for more information.
+			 */
+		};
+
+		target-module@4012c000 {
+			compatible = "ti,sysc-omap4";
+			ti,hwmods = "slimbus1";
+			reg = <0x4012c000 0x4>,
+			      <0x4012c010 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
+				 <0x4902c000 0x4902c000 0x1000>; /* L3 */
+
+			/* No child device binding or driver in mainline */
+		};
+
+		target-module@401f1000 {
+			compatible = "ti,sysc-omap4";
+			ti,hwmods = "aess";
+			reg = <0x401f1000 0x4>,
+			      <0x401f1010 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
+				 <0x490f1000 0x490f1000 0x1000>; /* L3 */
+
+			/*
+			 * No child device binding or driver in mainline.
+			 * See Android tree and related upstreaming efforts
+			 * for the old driver.
+			 */
+		};
+
 		mcbsp4: mcbsp@48096000 {
 			compatible = "ti,omap4-mcbsp";
 			reg = <0x48096000 0xff>; /* L4 Interconnect */
@@ -747,6 +954,19 @@ mbox_dsp: mbox_dsp {
 			};
 		};
 
+		target-module@4a10a000 {
+			compatible = "ti,sysc-omap4";
+			ti,hwmods = "fdif";
+			reg = <0x4a10a000 0x4>,
+			      <0x4a10a010 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a10a000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+
 		timer1: timer@4a318000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x4a318000 0x80>;
@@ -962,6 +1182,22 @@ abb_iva: regulator-abb-iva {
 			status = "disabled";
 		};
 
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4";
+			ti,hwmods = "gpu";
+			reg = <0x5601fc00 0x4>,
+			      <0x5601fc10 0x4>;
+			reg-names = "rev", "sysc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+
 		dss: dss@58000000 {
 			compatible = "ti,omap4-dss";
 			reg = <0x58000000 0x80>;

arch/arm/boot/dts/omap5.dtsi

@@ -295,6 +295,7 @@ sdma: dma-controller@4a056000 {
 			#dma-cells = <1>;
 			dma-channels = <32>;
 			dma-requests = <127>;
+			ti,hwmods = "dma_system";
 		};
 
 		gpio1: gpio@4ae10000 {

arch/arm/configs/davinci_all_defconfig

@@ -34,6 +34,7 @@ CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
@@ -56,9 +57,11 @@ CONFIG_NETFILTER=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
+CONFIG_DMA_CMA=y
 CONFIG_DA8XX_MSTPRI=y
 CONFIG_MTD=m
 CONFIG_MTD_TESTS=m
+CONFIG_MTD_CMDLINE_PARTS=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_CFI=m
 CONFIG_MTD_CFI_INTELEXT=m
@@ -195,7 +198,6 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_DAVINCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m

arch/arm/configs/exynos_defconfig

@@ -244,7 +244,7 @@ CONFIG_USB_STORAGE_ONETOUCH=m
 CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_STORAGE_ENE_UB6250=m
-CONFIG_USB_UAS=m
+CONFIG_USB_UAS=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -250,6 +250,7 @@ CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+CONFIG_DRM_DW_HDMI_CEC=y
 CONFIG_DRM_IMX=y
 CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_TVE=y
@@ -365,6 +366,7 @@ CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
 CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_MUX_MMIO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/configs/keystone_defconfig

@@ -189,6 +189,8 @@ CONFIG_KEYSTONE_NAVIGATOR_DMA=y
 CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=y
+CONFIG_PWM=y
+CONFIG_PWM_TIECAP=m
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_RESET_TI_SCI=m
 CONFIG_RESET_TI_SYSCON=m

arch/arm/configs/lpc32xx_defconfig

@@ -108,11 +108,11 @@ CONFIG_GPIO_MAX7300=y
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SX150X=y
 CONFIG_GPIO_74X164=y
 CONFIG_GPIO_MAX7301=y
 CONFIG_GPIO_MC33880=y
 CONFIG_PINCTRL_MCP23S08=y
+CONFIG_PINCTRL_SX150X=y
 CONFIG_SENSORS_DS620=y
 CONFIG_SENSORS_MAX6639=y
 CONFIG_WATCHDOG=y

arch/arm/configs/multi_v7_defconfig

@@ -31,6 +31,7 @@ CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARCH_BCM_HR2=y
 CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_21664=y
 CONFIG_ARCH_BCM_281XX=y
@@ -420,6 +421,7 @@ CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_UNIPHIER=y
 CONFIG_GPIO_XILINX=y
 CONFIG_GPIO_ZYNQ=y
 CONFIG_GPIO_PCA953X=y
@@ -689,10 +691,12 @@ CONFIG_USB_OHCI_EXYNOS=m
 CONFIG_USB_R8A66597_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
+CONFIG_USB_UAS=m
 CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_SUNXI=m
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
+CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -727,6 +731,7 @@ CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SDHCI_MSM=y
+CONFIG_MMC_MESON_MX_SDIO=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
@@ -767,6 +772,7 @@ CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_ST_LPC=y
 CONFIG_RTC_DRV_TWL4030=y
@@ -849,6 +855,7 @@ CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_REMOTEPROC=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_VIRTIO=m
 CONFIG_PM_DEVFREQ=y
 CONFIG_ARM_TEGRA_DEVFREQ=m
 CONFIG_MEMORY=y

arch/arm/configs/qcom_defconfig

 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -28,9 +27,7 @@ CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_PREEMPT=y
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
@@ -57,14 +54,13 @@ CONFIG_CFG80211=y
 CONFIG_RFKILL=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_QCOM_EBI2=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
+CONFIG_QCOM_COINCELL=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
@@ -87,6 +83,7 @@ CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 # CONFIG_USB_NET_ZAURUS is not set
+CONFIG_BRCMFMAC=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
@@ -98,12 +95,15 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8XXX_VIBRATOR=y
 CONFIG_INPUT_PMIC8XXX_PWRKEY=y
 CONFIG_INPUT_UINPUT=y
+CONFIG_RMI4_CORE=m
+CONFIG_RMI4_I2C=m
+CONFIG_RMI4_F11=y
+CONFIG_RMI4_F12=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_QUP=y
@@ -121,11 +121,10 @@ CONFIG_PINCTRL_MSM8X74=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
+CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_THERMAL=y
 CONFIG_QCOM_TSENS=y
 CONFIG_MFD_PM8XXX=y
@@ -135,8 +134,14 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_QCOM_RPM=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_LP855X=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_DYNAMIC_MINORS=y
@@ -155,15 +160,21 @@ CONFIG_USB_ACM=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_ULPI=y
 CONFIG_USB_SERIAL=y
+CONFIG_USB_HSIC_USB4604=y
 CONFIG_USB_MSM_OTG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_ULPI_BUS=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_QCOM_DML=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_MSM=y
@@ -173,7 +184,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PM8058=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PM8XXX=y
 CONFIG_DMADEVICES=y
@@ -187,15 +197,17 @@ CONFIG_IPQ_GCC_4019=y
 CONFIG_IPQ_LCC_806X=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_LCC_8960=y
-CONFIG_MDM_GCC_9615=y
 CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_REMOTEPROC=y
 CONFIG_QCOM_ADSP_PIL=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
+CONFIG_RPMSG_CHAR=y
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMEM=y
@@ -203,6 +215,7 @@ CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_WCNSS_CTRL=y
+CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
 CONFIG_IIO_SW_TRIGGER=y
@@ -211,9 +224,11 @@ CONFIG_MPU3050_I2C=y
 CONFIG_AK8975=y
 CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_BMP280=y
+CONFIG_PWM=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_NVMEM=y
+CONFIG_PHY_QCOM_USB_HS=y
+CONFIG_PHY_QCOM_USB_HSIC=y
 CONFIG_QCOM_QFPROM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -234,7 +249,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y

arch/arm/configs/stm32_defconfig

@@ -18,7 +18,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
-CONFIG_ARM_SINGLE_ARMV7M=y
 CONFIG_ARCH_STM32=y
 CONFIG_CPU_V7M_NUM_IRQ=240
 CONFIG_SET_MEM_PARAM=y
@@ -44,18 +43,18 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_STM32F4=y
+CONFIG_I2C_STM32F7=y
+CONFIG_GPIO_STMPE=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_GPIO_STMPE=y
 CONFIG_MFD_STMPE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
@@ -67,6 +66,8 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_STM32=y
 CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
@@ -81,8 +82,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_DEV_STM32=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y

arch/arm/include/asm/smp_scu.h

@@ -28,6 +28,8 @@ static inline unsigned long scu_a9_get_base(void)
 #ifdef CONFIG_HAVE_ARM_SCU
 unsigned int scu_get_core_count(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
+int scu_cpu_power_enable(void __iomem *, unsigned int);
+int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu);
 #else
 static inline unsigned int scu_get_core_count(void __iomem *scu_base)
 {
@@ -37,6 +39,16 @@ static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
 	return -EINVAL;
 }
+static inline int scu_cpu_power_enable(void __iomem *scu_base,
+				       unsigned int mode)
+{
+	return -EINVAL;
+}
+static inline int scu_get_cpu_power_mode(void __iomem *scu_base,
+					 unsigned int logical_cpu)
+{
+	return -EINVAL;
+}
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU)

arch/arm/include/debug/brcmstb.S

@@ -58,6 +58,7 @@
 		/* Check SUN_TOP_CTRL base */
 		ldr	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
 		ldr	\rv, [\rp, #0]		@ get register contents
+ARM_BE8(	rev	\rv, \rv )
 		and	\rv, \rv, #0xffffff00	@ strip revision bits [7:0]
 
 		/* Chip specific detection starts here */
@@ -98,11 +99,13 @@
 		.endm
 
 		.macro	store, rd, rx:vararg
+ARM_BE8(	rev	\rd, \rd )
 		str	\rd, \rx
 		.endm
 
 		.macro	load, rd, rx:vararg
 		ldr	\rd, \rx
+ARM_BE8(	rev	\rd, \rd )
 		.endm
 
 		.macro	senduart,rd,rx

arch/arm/include/uapi/asm/ptrace.h

@@ -58,6 +58,7 @@
 #endif
 #define FIQ_MODE	0x00000011
 #define IRQ_MODE	0x00000012
+#define MON_MODE	0x00000016
 #define ABT_MODE	0x00000017
 #define HYP_MODE	0x0000001a
 #define UND_MODE	0x0000001b

arch/arm/kernel/smp_scu.c

@@ -21,6 +21,7 @@
 #define SCU_STANDBY_ENABLE	(1 << 5)
 #define SCU_CONFIG		0x04
 #define SCU_CPU_STATUS		0x08
+#define SCU_CPU_STATUS_MASK	GENMASK(1, 0)
 #define SCU_INVALIDATE		0x0c
 #define SCU_FPGA_REVISION	0x10
 
@@ -72,6 +73,24 @@ void scu_enable(void __iomem *scu_base)
 }
 #endif
 
+static int scu_set_power_mode_internal(void __iomem *scu_base,
+				       unsigned int logical_cpu,
+				       unsigned int mode)
+{
+	unsigned int val;
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
+
+	if (mode > 3 || mode == 1 || cpu > 3)
+		return -EINVAL;
+
+	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
+	val &= ~SCU_CPU_STATUS_MASK;
+	val |= mode;
+	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
+
+	return 0;
+}
+
 /*
  * Set the executing CPUs power mode as defined.  This will be in
  * preparation for it executing a WFI instruction.
@@ -81,16 +100,28 @@ void scu_enable(void __iomem *scu_base)
  * flushed.  Interrupts must also have been disabled.
  */
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
+{
+	return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode);
+}
+
+/*
+ * Set the given (logical) CPU's power mode to SCU_PM_NORMAL.
+ */
+int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu)
+{
+	return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL);
+}
+
+int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu)
 {
 	unsigned int val;
-	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
 
-	if (mode > 3 || mode == 1 || cpu > 3)
+	if (cpu > 3)
 		return -EINVAL;
 
-	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
-	val |= mode;
-	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
+	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
+	val &= SCU_CPU_STATUS_MASK;
 
-	return 0;
+	return val;
 }

arch/arm/mach-actions/Makefile

-obj-${CONFIG_SMP} += platsmp.o headsmp.o
-
-AFLAGS_headsmp.o := -Wa,-march=armv7-a
+obj-${CONFIG_SMP} += platsmp.o

arch/arm/mach-actions/headsmp.S

-/*
- * Copyright 2012 Actions Semi Inc.
- * Author: Actions Semi, Inc.
- *
- * Copyright (c) 2017 Andreas Färber
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-ENTRY(owl_v7_invalidate_l1)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 2, r0, c0, c0, 0
-	mrc	p15, 1, r0, c0, c0, 0
-
-	ldr	r1, =0x7fff
-	and	r2, r1, r0, lsr #13
-
-	ldr	r1, =0x3ff
-
-	and	r3, r1, r0, lsr #3	@ NumWays - 1
-	add	r2, r2, #1		@ NumSets
-
-	and	r0, r0, #0x7
-	add	r0, r0, #4	@ SetShift
-
-	clz	r1, r3		@ WayShift
-	add	r4, r3, #1	@ NumWays
-1:	sub	r2, r2, #1	@ NumSets--
-	mov	r3, r4		@ Temp = NumWays
-2:	subs	r3, r3, #1	@ Temp--
-	mov	r5, r3, lsl r1
-	mov	r6, r2, lsl r0
-	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-	mcr	p15, 0, r5, c7, c6, 2
-	bgt	2b
-	cmp	r2, #0
-	bgt	1b
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(owl_v7_invalidate_l1)
-
-ENTRY(owl_secondary_startup)
-	bl	owl_v7_invalidate_l1
-	b	secondary_startup

arch/arm/mach-actions/platsmp.c

@@ -71,7 +71,7 @@ static int s500_wakeup_secondary(unsigned int cpu)
 	/* wait for CPUx to run to WFE instruction */
 	udelay(200);
 
-	writel(virt_to_phys(owl_secondary_startup),
+	writel(__pa_symbol(secondary_startup),
 	       timer_base_addr + OWL_CPU1_ADDR + (cpu - 1) * 4);
 	writel(OWL_CPUx_FLAG_BOOT,
 	       timer_base_addr + OWL_CPU1_FLAG + (cpu - 1) * 4);

arch/arm/mach-bcm/Kconfig

@@ -37,6 +37,15 @@ config ARCH_BCM_CYGNUS
 	  BCM11300, BCM11320, BCM11350, BCM11360,
 	  BCM58300, BCM58302, BCM58303, BCM58305.
 
+config ARCH_BCM_HR2
+	bool "Broadcom Hurricane 2 SoC support"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	help
+	  Enable support for the Hurricane 2 family,
+	  which includes the following variants:
+	  BCM53342, BCM53343, BCM53344, BCM53346.
+
 config ARCH_BCM_NSP
 	bool "Broadcom Northstar Plus SoC Support"
 	depends on ARCH_MULTI_V7

arch/arm/mach-bcm/Makefile

@@ -13,6 +13,9 @@
 # Cygnus
 obj-$(CONFIG_ARCH_BCM_CYGNUS) +=  bcm_cygnus.o
 
+# Hurricane 2
+obj-$(CONFIG_ARCH_BCM_HR2)	+= bcm_hr2.o
+
 # Northstar Plus
 obj-$(CONFIG_ARCH_BCM_NSP)	+= bcm_nsp.o
 
@@ -43,6 +46,11 @@ endif
 
 # BCM2835
 obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
+ifeq ($(CONFIG_ARCH_BCM2835),y)
+ifeq ($(CONFIG_ARM),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
+endif
 
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o

arch/arm/mach-bcm/bcm_hr2.c

+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char * const bcm_hr2_dt_compat[] __initconst = {
+	"brcm,hr2",
+	NULL,
+};
+
+DT_MACHINE_START(BCM_HR2_DT, "Broadcom Hurricane 2 SoC")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.dt_compat = bcm_hr2_dt_compat,
+MACHINE_END

arch/arm/mach-bcm/board_bcm2835.c

@@ -15,15 +15,11 @@
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
-#include <linux/clk/bcm2835.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-static void __init bcm2835_init(void)
-{
-	bcm2835_init_clocks();
-}
+#include "platsmp.h"
 
 static const char * const bcm2835_compat[] = {
 #ifdef CONFIG_ARCH_MULTI_V6
@@ -31,11 +27,12 @@ static const char * const bcm2835_compat[] = {
 #endif
 #ifdef CONFIG_ARCH_MULTI_V7
 	"brcm,bcm2836",
+	"brcm,bcm2837",
 #endif
 	NULL
 };
 
 DT_MACHINE_START(BCM2835, "BCM2835")
-	.init_machine = bcm2835_init,
-	.dt_compat = bcm2835_compat
+	.dt_compat = bcm2835_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
 MACHINE_END

arch/arm/mach-bcm/platsmp.c

@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip/irq-bcm2836.h>
 #include <linux/jiffies.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -287,6 +288,38 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return ret;
 }
 
+static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *intc_base;
+	struct device_node *dn;
+	char *name;
+
+	name = "brcm,bcm2836-l1-intc";
+	dn = of_find_compatible_node(NULL, NULL, name);
+	if (!dn) {
+		pr_err("unable to find intc node\n");
+		return -ENODEV;
+	}
+
+	intc_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!intc_base) {
+		pr_err("unable to remap intc base register\n");
+		return -ENOMEM;
+	}
+
+	writel(virt_to_phys(secondary_startup),
+	       intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
+
+	dsb(sy);
+	sev();
+
+	iounmap(intc_base);
+
+	return 0;
+}
+
 static const struct smp_operations kona_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
 	.smp_boot_secondary	= kona_boot_secondary,
@@ -305,3 +338,8 @@ static const struct smp_operations nsp_smp_ops __initconst = {
 	.smp_boot_secondary	= nsp_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
+
+const struct smp_operations bcm2836_smp_ops __initconst = {
+	.smp_boot_secondary	= bcm2836_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops);

arch/arm/mach-bcm/platsmp.h

+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ */
+
+extern const struct smp_operations bcm2836_smp_ops;

arch/arm/mach-ep93xx/simone.c

@@ -42,60 +42,12 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 };
 
-/*
- * GPIO lines used for MMC card detection.
- */
-#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
-
-/*
- * MMC card detection GPIO setup.
- */
-
-static int simone_mmc_spi_init(struct device *dev,
-	irqreturn_t (*irq_handler)(int, void *), void *mmc)
-{
-	unsigned int gpio = MMC_CARD_DETECT_GPIO;
-	int irq, err;
-
-	err = gpio_request(gpio, dev_name(dev));
-	if (err)
-		return err;
-
-	err = gpio_direction_input(gpio);
-	if (err)
-		goto fail;
-
-	irq = gpio_to_irq(gpio);
-	if (irq < 0)
-		goto fail;
-
-	err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
-			  "MMC card detect", mmc);
-	if (err)
-		goto fail;
-
-	printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
-	       dev_name(dev), irq);
-
-	return 0;
-fail:
-	gpio_free(gpio);
-	return err;
-}
-
-static void simone_mmc_spi_exit(struct device *dev, void *mmc)
-{
-	unsigned int gpio = MMC_CARD_DETECT_GPIO;
-
-	free_irq(gpio_to_irq(gpio), mmc);
-	gpio_free(gpio);
-}
-
 static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.init		= simone_mmc_spi_init,
-	.exit		= simone_mmc_spi_exit,
 	.detect_delay	= 500,
 	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.flags		= MMC_SPI_USE_CD_GPIO,
+	.cd_gpio	= EP93XX_GPIO_LINE_EGPIO0,
+	.cd_debounce	= 1,
 };
 
 static struct spi_board_info simone_spi_devices[] __initdata = {

arch/arm/mach-ep93xx/ts72xx.c

@@ -18,7 +18,10 @@
 #include <linux/io.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/spi-ep93xx.h>
 
+#include <mach/gpio-ep93xx.h>
 #include <mach/hardware.h>
 
 #include <asm/mach-types.h>
@@ -186,24 +189,22 @@ static struct platform_device ts72xx_rtc_device = {
 	.num_resources 	= ARRAY_SIZE(ts72xx_rtc_resources),
 };
 
+/*************************************************************************
+ * Watchdog (in CPLD)
+ *************************************************************************/
+#define TS72XX_WDT_CONTROL_PHYS_BASE	(EP93XX_CS2_PHYS_BASE + 0x03800000)
+#define TS72XX_WDT_FEED_PHYS_BASE	(EP93XX_CS2_PHYS_BASE + 0x03c00000)
+
 static struct resource ts72xx_wdt_resources[] = {
-	{
-		.start	= TS72XX_WDT_CONTROL_PHYS_BASE,
-		.end	= TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= TS72XX_WDT_FEED_PHYS_BASE,
-		.end	= TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
+	DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
 };
 
 static struct platform_device ts72xx_wdt_device = {
 	.name		= "ts72xx-wdt",
 	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(ts72xx_wdt_resources),
 	.resource	= ts72xx_wdt_resources,
+	.num_resources	= ARRAY_SIZE(ts72xx_wdt_resources),
 };
 
 static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
@@ -232,6 +233,27 @@ static struct platform_device ts73xx_fpga_device = {
 
 #endif
 
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info ts72xx_spi_devices[] __initdata = {
+	{
+		.modalias		= "tmp122",
+		.max_speed_hz		= 2 * 1000 * 1000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+	},
+};
+
+static int ts72xx_spi_chipselects[] __initdata = {
+	EP93XX_GPIO_LINE_F(2),		/* DIO_17 */
+};
+
+static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
+	.chipselect	= ts72xx_spi_chipselects,
+	.num_chipselect	= ARRAY_SIZE(ts72xx_spi_chipselects),
+};
+
 static void __init ts72xx_init_machine(void)
 {
 	ep93xx_init_devices();
@@ -244,6 +266,8 @@ static void __init ts72xx_init_machine(void)
 	if (board_is_ts7300())
 		platform_device_register(&ts73xx_fpga_device);
 #endif
+	ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
+			    ARRAY_SIZE(ts72xx_spi_devices));
 }
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")

arch/arm/mach-ep93xx/ts72xx.h

@@ -39,9 +39,6 @@
 #define TS72XX_OPTIONS2_TS9420		0x04
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
-#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
-#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
-
 #ifndef __ASSEMBLY__
 
 static inline int ts72xx_model(void)

arch/arm/mach-exynos/Kconfig

@@ -85,11 +85,6 @@ config CPU_EXYNOS4210
 	default y
 	depends on ARCH_EXYNOS4
 
-config SOC_EXYNOS4212
-	bool "SAMSUNG EXYNOS4212"
-	default y
-	depends on ARCH_EXYNOS4
-
 config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y

arch/arm/mach-exynos/common.h

@@ -18,7 +18,6 @@
 #define EXYNOS3_SOC_MASK	0xFFFFF000
 
 #define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
 #define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
@@ -39,7 +38,6 @@ static inline int is_samsung_##name(void)	\
 
 IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@@ -59,12 +57,6 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
 #if defined(CONFIG_SOC_EXYNOS4412)
 # define soc_is_exynos4412()	is_samsung_exynos4412()
 #else
@@ -105,8 +97,7 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos5800()	0
 #endif
 
-#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
-			  soc_is_exynos4412())
+#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4412())
 #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
 			  soc_is_exynos5420() || soc_is_exynos5800())
 

arch/arm/mach-exynos/exynos.c

@@ -195,7 +195,6 @@ static void __init exynos_dt_machine_init(void)
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
-	    of_machine_is_compatible("samsung,exynos4212") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&
 	     of_machine_is_compatible("samsung,trats2")) ||
 	    of_machine_is_compatible("samsung,exynos3250") ||
@@ -208,7 +207,6 @@ static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos3250",
 	"samsung,exynos4",
 	"samsung,exynos4210",
-	"samsung,exynos4212",
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",

arch/arm/mach-exynos/firmware.c

@@ -70,12 +70,7 @@ static int exynos_cpu_boot(int cpu)
 
 	/*
 	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
-	 * But, Exynos4212 has only one secondary CPU so second parameter
-	 * isn't used for informing secure firmware about CPU id.
 	 */
-	if (soc_is_exynos4212())
-		cpu = 0;
-
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }

arch/arm/mach-exynos/pm.c

@@ -167,8 +167,7 @@ void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
-	if (of_machine_is_compatible("samsung,exynos4212") ||
-	    of_machine_is_compatible("samsung,exynos4412")) {
+	if (of_machine_is_compatible("samsung,exynos4412")) {
 		/* Setting SEQ_OPTION register */
 		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
 			       S5P_CENTRAL_SEQ_OPTION);

arch/arm/mach-exynos/suspend.c

@@ -225,7 +225,6 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
-EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@@ -616,9 +615,6 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = &exynos4_pm_data,
-	}, {
-		.compatible = "samsung,exynos4212-pmu",
-		.data = &exynos4_pm_data,
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = &exynos4_pm_data,

arch/arm/mach-imx/3ds_debugboard.c

@@ -20,7 +20,7 @@
 #include <linux/smsc911x.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
-
+#include "3ds_debugboard.h"
 #include "hardware.h"
 
 /* LAN9217 ethernet base address */

arch/arm/mach-imx/cpuidle-imx5.c

@@ -9,6 +9,7 @@
 #include <linux/cpuidle.h>
 #include <linux/module.h>
 #include <asm/system_misc.h>
+#include "cpuidle.h"
 
 static int imx5_cpuidle_enter(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv, int index)

arch/arm/mach-imx/mach-imx6q.c

@@ -289,10 +289,13 @@ static void __init imx6q_init_machine(void)
 static void __init imx6q_init_late(void)
 {
 	/*
-	 * WAIT mode is broken on TO 1.0 and 1.1, so there is no point
-	 * to run cpuidle on them.
+	 * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
+	 * there is no point to run cpuidle on them.
+	 *
+	 * It does work on imx6 Solo/DualLite starting from 1.1
 	 */
-	if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
+	if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) ||
+	    (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
 		imx6q_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))

arch/arm/mach-imx/mach-mx31lite.c

@@ -245,7 +245,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
 /*
  * Set up static virtual mappings.
  */
-void __init mx31lite_map_io(void)
+static void __init mx31lite_map_io(void)
 {
 	mx31_map_io();
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));

arch/arm/mach-imx/mx31moboard-devboard.c

@@ -22,6 +22,7 @@
 
 #include <linux/usb/otg.h>
 
+#include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
 #include "ehci.h"

arch/arm/mach-imx/mx31moboard-marxbot.c

@@ -24,6 +24,7 @@
 
 #include <linux/usb/otg.h>
 
+#include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
 #include "ehci.h"

arch/arm/mach-integrator/Makefile

@@ -8,6 +8,4 @@
 obj-y					:= core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
-
-obj-$(CONFIG_PCI)			+= pci_v3.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o

arch/arm/mach-integrator/integrator_ap.c

@@ -36,7 +36,6 @@
 #include "hardware.h"
 #include "cm.h"
 #include "common.h"
-#include "pci_v3.h"
 #include "lm.h"
 
 /* Regmap to the AP system controller */
@@ -74,7 +73,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
-	pci_v3_early_init();
 }
 
 #ifdef CONFIG_PM

arch/arm/mach-integrator/pci_v3.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/* Simple oneliner include to the PCIv3 early init */
-#ifdef CONFIG_PCI
-extern int pci_v3_early_init(void);
-#else
-static inline int pci_v3_early_init(void)
-{
-	return 0;
-}
-#endif

arch/arm/mach-meson/Kconfig

@@ -9,6 +9,7 @@ menuconfig ARCH_MESON
 	select PINCTRL_MESON
 	select COMMON_CLK
 	select COMMON_CLK_AMLOGIC
+	select HAVE_ARM_SCU if SMP
 
 if ARCH_MESON
 
@@ -28,5 +29,6 @@ config MACH_MESON8B
 	default ARCH_MESON
 	select MESON6_TIMER
 	select COMMON_CLK_MESON8B
+	select MESON_IRQ_GPIO
 
 endif

arch/arm/mach-meson/Makefile

 obj-$(CONFIG_ARCH_MESON) += meson.o
+obj-$(CONFIG_SMP) += platsmp.o

arch/arm/mach-mxs/pm.c

@@ -30,7 +30,7 @@ static int mxs_suspend_enter(suspend_state_t state)
 	return 0;
 }
 
-static struct platform_suspend_ops mxs_suspend_ops = {
+static const struct platform_suspend_ops mxs_suspend_ops = {
 	.enter = mxs_suspend_enter,
 	.valid = suspend_valid_only_mem,
 };

arch/arm/mach-omap1/board-ams-delta.c

@@ -156,7 +156,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
 	}
 };
 
-static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+static const struct omap_lcd_config ams_delta_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-fsample.c

@@ -266,7 +266,7 @@ static struct platform_device *devices[] __initdata = {
 	&kp_device,
 };
 
-static struct omap_lcd_config fsample_lcd_config = {
+static const struct omap_lcd_config fsample_lcd_config = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-h2.c

@@ -357,7 +357,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_lcd_config h2_lcd_config __initdata = {
+static const struct omap_lcd_config h2_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-h3.c

@@ -376,7 +376,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_lcd_config h3_lcd_config __initdata = {
+static const struct omap_lcd_config h3_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-htcherald.c

@@ -391,7 +391,7 @@ static struct omap_usb_config htcherald_usb_config __initdata = {
 };
 
 /* LCD Device resources */
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
+static const struct omap_lcd_config htcherald_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-innovator.c

@@ -302,7 +302,7 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 #endif
@@ -323,7 +323,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+static const struct omap_lcd_config innovator1610_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 #endif

arch/arm/mach-omap1/board-nokia770.c

@@ -103,7 +103,7 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
 	.shutdown = mipid_shutdown,
 };
 
-static struct omap_lcd_config nokia770_lcd_config __initdata = {
+static const struct omap_lcd_config nokia770_lcd_config __initconst = {
 	.ctrl_name	= "hwa742",
 };
 

arch/arm/mach-omap1/board-osk.c

@@ -295,7 +295,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
 };
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
-static struct omap_lcd_config osk_lcd_config __initdata = {
+static const struct omap_lcd_config osk_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 #endif

arch/arm/mach-omap1/board-palmte.c

@@ -178,7 +178,7 @@ static struct omap_usb_config palmte_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_lcd_config palmte_lcd_config __initdata = {
+static const struct omap_lcd_config palmte_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-palmtt.c

@@ -241,7 +241,7 @@ static struct omap_usb_config palmtt_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_lcd_config palmtt_lcd_config __initdata = {
+static const struct omap_lcd_config palmtt_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-palmz71.c

@@ -206,7 +206,7 @@ static struct omap_usb_config palmz71_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_lcd_config palmz71_lcd_config __initdata = {
+static const struct omap_lcd_config palmz71_lcd_config __initconst = {
 	.ctrl_name = "internal",
 };
 

arch/arm/mach-omap1/board-perseus2.c

@@ -225,7 +225,7 @@ static struct platform_device *devices[] __initdata = {
 	&kp_device,
 };
 
-static struct omap_lcd_config perseus2_lcd_config __initdata = {
+static const struct omap_lcd_config perseus2_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap1/board-sx1.c

@@ -297,7 +297,7 @@ static struct omap_usb_config sx1_usb_config __initdata = {
 
 /*----------- LCD -------------------------*/
 
-static struct omap_lcd_config sx1_lcd_config __initdata = {
+static const struct omap_lcd_config sx1_lcd_config __initconst = {
 	.ctrl_name	= "internal",
 };
 

arch/arm/mach-omap2/Kconfig

@@ -104,6 +104,7 @@ config ARCH_OMAP2PLUS
 	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
+	select TI_SYSC
 	select OMAP_IRQCHIP
 	select CLKSRC_TI_32K
 	help

arch/arm/mach-omap2/Makefile

@@ -199,15 +199,12 @@ obj-y					+= omap_hwmod_common_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_interconnect_data.o
-obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_interconnect_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o

arch/arm/mach-omap2/common.h

@@ -225,7 +225,6 @@ extern struct device *omap2_get_iva_device(void);
 extern struct device *omap2_get_l3_device(void);
 extern struct device *omap4_get_dsp_device(void);
 
-unsigned int omap4_xlate_irq(unsigned int hwirq);
 void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0

arch/arm/mach-omap2/dma.c

@@ -223,7 +223,7 @@ static struct omap_system_dma_plat_info dma_plat_info __initdata = {
 	.dma_read	= dma_read,
 };
 
-static struct platform_device_info omap_dma_dev_info = {
+static struct platform_device_info omap_dma_dev_info __initdata = {
 	.name = "omap-dma-engine",
 	.id = -1,
 	.dma_mask = DMA_BIT_MASK(32),

arch/arm/mach-omap2/hdq1w.c

@@ -75,25 +75,3 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
-
-#ifndef CONFIG_OF
-static int __init omap_init_hdq(void)
-{
-	int id = -1;
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	char *oh_name = "hdq1w";
-	char *devname = "omap_hdq";
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh)
-		return 0;
-
-	pdev = omap_device_build(devname, id, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
-	     devname, oh->name);
-
-	return 0;
-}
-omap_arch_initcall(omap_init_hdq);
-#endif

arch/arm/mach-omap2/id.c

@@ -693,9 +693,12 @@ void __init dra7xxx_check_revision(void)
 			omap_revision = DRA722_REV_ES1_0;
 			break;
 		case 1:
-		default:
 			omap_revision = DRA722_REV_ES2_0;
 			break;
+		case 2:
+		default:
+			omap_revision = DRA722_REV_ES2_1;
+			break;
 		}
 		break;
 

arch/arm/mach-omap2/omap4-common.c

@@ -299,30 +299,6 @@ static const struct of_device_id intc_match[] = {
 
 static struct device_node *intc_node;
 
-unsigned int omap4_xlate_irq(unsigned int hwirq)
-{
-	struct of_phandle_args irq_data;
-	unsigned int irq;
-
-	if (!intc_node)
-		intc_node = of_find_matching_node(NULL, intc_match);
-
-	if (WARN_ON(!intc_node))
-		return hwirq;
-
-	irq_data.np = intc_node;
-	irq_data.args_count = 3;
-	irq_data.args[0] = 0;
-	irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
-	irq_data.args[2] = IRQ_TYPE_LEVEL_HIGH;
-
-	irq = irq_create_of_mapping(&irq_data);
-	if (WARN_ON(!irq))
-		irq = hwirq;
-
-	return irq;
-}
-
 void __init omap_gic_of_init(void)
 {
 	struct device_node *np;

arch/arm/mach-omap2/omap_device.h

@@ -75,10 +75,6 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
 					  struct omap_hwmod *oh, void *pdata,
 					  int pdata_len);
 
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **oh, int oh_cnt,
-					 void *pdata, int pdata_len);
-
 struct omap_device *omap_device_alloc(struct platform_device *pdev,
 				      struct omap_hwmod **ohs, int oh_cnt);
 void omap_device_delete(struct omap_device *od);

arch/arm/mach-omap2/omap_hwmod.h

@@ -21,7 +21,6 @@
  *
  * To do:
  * - add interconnect error log structures
- * - add pinmuxing
  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  * - implement default hwmod SMS/SDRC flags?
  * - move Linux-specific data ("non-ROM data") out
@@ -150,50 +149,6 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 #define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
 #endif
 
-/**
- * struct omap_hwmod_mux_info - hwmod specific mux configuration
- * @pads:              array of omap_device_pad entries
- * @nr_pads:           number of omap_device_pad entries
- *
- * Note that this is currently built during init as needed.
- */
-struct omap_hwmod_mux_info {
-	int				nr_pads;
-	struct omap_device_pad		*pads;
-	int				nr_pads_dynamic;
-	struct omap_device_pad		**pads_dynamic;
-	int				*irqs;
-	bool				enabled;
-};
-
-/**
- * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
- * @name: name of the IRQ channel (module local name)
- * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_irq_info {
-	const char	*name;
-	s16		irq;
-};
-
-/**
- * struct omap_hwmod_dma_info - DMA channels used by the hwmod
- * @name: name of the DMA channel (module local name)
- * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_dma_info {
-	const char	*name;
-	s16		dma_req;
-};
-
 /**
  * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
  * @name: name of the reset line (module local name)
@@ -243,34 +198,6 @@ struct omap_hwmod_omap2_firewall {
 	u8 flags;
 };
 
-
-/*
- * omap_hwmod_addr_space.flags bits
- *
- * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
- * ADDR_TYPE_RT: Address space contains module register target data.
- */
-#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
-#define ADDR_TYPE_RT		(1 << 1)
-
-/**
- * struct omap_hwmod_addr_space - address space handled by the hwmod
- * @name: name of the address space
- * @pa_start: starting physical address
- * @pa_end: ending physical address
- * @flags: (see omap_hwmod_addr_space.flags macros above)
- *
- * Address space doesn't necessarily follow physical interconnect
- * structure.  GPMC is one example.
- */
-struct omap_hwmod_addr_space {
-	const char *name;
-	u32 pa_start;
-	u32 pa_end;
-	u8 flags;
-};
-
-
 /*
  * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
  * interface to interact with the hwmod.  Used to add sleep dependencies
@@ -446,9 +373,12 @@ struct omap_hwmod_omap2_prcm {
  * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
  *	offset of zero; this flag bit should be set in those cases to
  *	distinguish from hwmods that have no clkctrl offset.
+ * HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK: Module clockctrl clock is managed
+ *	by the common clock framework and not hwmod.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
 #define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
+#define HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK		(1 << 2)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
@@ -626,8 +556,6 @@ struct omap_hwmod_class {
  * @name: name of the hwmod
  * @class: struct omap_hwmod_class * to the class of this hwmod
  * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs
- * @sdma_reqs: ptr to an array of System DMA request IDs
  * @prcm: PRCM data pertaining to this hwmod
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
@@ -670,9 +598,6 @@ struct omap_hwmod {
 	const char			*name;
 	struct omap_hwmod_class		*class;
 	struct omap_device		*od;
-	struct omap_hwmod_mux_info	*mux;
-	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_reqs;
 	struct omap_hwmod_rst_info	*rst_lines;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
@@ -691,7 +616,6 @@ struct omap_hwmod {
 	struct lock_class_key		hwmod_key; /* unique lock class */
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
-	unsigned int			(*xlate_irq)(unsigned int);
 	u32				flags;
 	u8				mpu_rt_idx;
 	u8				response_lat;
@@ -705,11 +629,16 @@ struct omap_hwmod {
 	struct omap_hwmod		*parent_hwmod;
 };
 
+struct device_node;
+
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
 
 int __init omap_hwmod_setup_one(const char *name);
+int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
+				  struct device_node *np,
+				  struct resource *res);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
 int omap_hwmod_idle(struct omap_hwmod *oh);
@@ -724,7 +653,6 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
 
 int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
 int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
 				   const char *name, struct resource *res);
 

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -155,7 +155,6 @@ static struct omap_dma_dev_attr dma_dev_attr = {
 static struct omap_hwmod omap2420_dma_system_hwmod = {
 	.name		= "dma",
 	.class		= &omap2xxx_dma_hwmod_class,
-	.mpu_irqs	= omap2_dma_system_irqs,
 	.main_clk	= "core_l3_ck",
 	.dev_attr	= &dma_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
@@ -371,7 +370,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
 	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2420_dma_system_hwmod,
 	.clk		= "sdma_ick",
-	.addr		= omap2_dma_system_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -153,7 +153,6 @@ static struct omap_dma_dev_attr dma_dev_attr = {
 static struct omap_hwmod omap2430_dma_system_hwmod = {
 	.name		= "dma",
 	.class		= &omap2xxx_dma_hwmod_class,
-	.mpu_irqs	= omap2_dma_system_irqs,
 	.main_clk	= "core_l3_ck",
 	.dev_attr	= &dma_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
@@ -572,7 +571,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
 	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2430_dma_system_hwmod,
 	.clk		= "sdma_ick",
-	.addr		= omap2_dma_system_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c

-/*
- * omap_hwmod_2xxx_3xxx_interconnect_data.c - common interconnect data, OMAP2/3
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <asm/sizes.h>
-
-#include "omap_hwmod.h"
-
-#include "omap_hwmod_common_data.h"
-
-struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x48056000,
-		.pa_end		= 0x48056000 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ },
-};

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c

@@ -65,21 +65,6 @@ struct omap_hwmod_class iva_hwmod_class = {
 	.name = "iva",
 };
 
-/* Common MPU IRQ line data */
-
-struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
-	{ .irq = 25 + OMAP_INTC_START, },
-	{ .irq = -1, },
-};
-
-struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
-	{ .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */
-	{ .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
-	{ .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
-	{ .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
-	{ .irq = -1, },
-};
-
 struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x14,

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -20,11 +20,6 @@
 #include "prm-regbits-24xx.h"
 #include "wd_timer.h"
 
-static struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
-	{ .name = "dispc", .dma_req = 5 },
-	{ .dma_req = -1, },
-};
-
 /*
  * 'dispc' class
  * display controller
@@ -550,7 +545,6 @@ struct omap_hwmod omap2xxx_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap2_dss_hwmod_class,
 	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap2xxx_dss_sdma_chs,
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c

@@ -159,54 +159,24 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
-	{
-		.pa_start	= 0x48300000,
-		.pa_end		= 0x48300000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_epwmss0_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss0_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
-	{
-		.pa_start	= 0x48302000,
-		.pa_end		= 0x48302000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_epwmss1_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_epwmss2_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -250,92 +220,42 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
 };
 
 /* l4 ls -> mcasp0 */
-static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
-	{
-		.pa_start	= 0x48038000,
-		.pa_end		= 0x48038000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_mcasp0_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp0_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* l4 ls -> mcasp1 */
-static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
-	{
-		.pa_start	= 0x4803C000,
-		.pa_end		= 0x4803C000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_mcasp1_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* l4 ls -> mmc0 */
-static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
-	{
-		.pa_start	= 0x48060100,
-		.pa_end		= 0x48060100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_mmc0_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc0_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* l4 ls -> mmc1 */
-static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
-	{
-		.pa_start	= 0x481d8100,
-		.pa_end		= 0x481d8100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_mmc1_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* l3 s -> mmc2 */
-static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
-	{
-		.pa_start	= 0x47810100,
-		.pa_end		= 0x47810100 + SZ_64K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
 	.master		= &am33xx_l3_s_hwmod,
 	.slave		= &am33xx_mmc2_hwmod,
 	.clk		= "l3s_gclk",
-	.addr		= am33xx_mmc2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -412,56 +332,26 @@ struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
 };
 
 /* l3 main -> tpcc0 */
-static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
-	{
-		.pa_start	= 0x49800000,
-		.pa_end		= 0x49800000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_tptc0_hwmod,
 	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc0_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* l3 main -> tpcc1 */
-static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
-	{
-		.pa_start	= 0x49900000,
-		.pa_end		= 0x49900000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_tptc1_hwmod,
 	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* l3 main -> tpcc2 */
-static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
-	{
-		.pa_start	= 0x49a00000,
-		.pa_end		= 0x49a00000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_tptc2_hwmod,
 	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -513,38 +403,18 @@ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
 };
 
 /* l3 main -> sha0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
-	{
-		.pa_start	= 0x53100000,
-		.pa_end		= 0x53100000 + SZ_512 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_sha0_hwmod,
 	.clk		= "sha0_fck",
-	.addr		= am33xx_sha0_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l3 main -> AES0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
-	{
-		.pa_start	= 0x53500000,
-		.pa_end		= 0x53500000 + SZ_1M - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_aes0_hwmod,
 	.clk		= "aes0_fck",
-	.addr		= am33xx_aes0_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -778,9 +778,9 @@ struct omap_hwmod am33xx_mcasp1_hwmod = {
 
 /* 'mmc' class */
 static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
-	.rev_offs	= 0x1fc,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
+	.rev_offs	= 0x2fc,
+	.sysc_offs	= 0x110,
+	.syss_offs	= 0x114,
 	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
 			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
 			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -320,20 +320,11 @@ static struct omap_hwmod am33xx_usbss_hwmod = {
  * Interfaces
  */
 
-static struct omap_hwmod_addr_space am33xx_emif_addrs[] = {
-	{
-		.pa_start	= 0x4c000000,
-		.pa_end		= 0x4c000fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 /* l3 main -> emif */
 static struct omap_hwmod_ocp_if am33xx_l3_main__emif = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_emif_hwmod,
 	.clk		= "dpll_core_m4_ck",
-	.addr		= am33xx_emif_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -370,20 +361,10 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
 };
 
 /* l3_main -> debugss */
-static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = {
-	{
-		.pa_start	= 0x4b000000,
-		.pa_end		= 0x4b000000 + SZ_16M - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_debugss_hwmod,
 	.clk		= "dpll_core_m4_ck",
-	.addr		= am33xx_debugss_addrs,
 	.user		= OCP_USER_MPU,
 };
 
@@ -428,20 +409,10 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = {
 };
 
 /* L4 WKUP -> ADC_TSC */
-static struct omap_hwmod_addr_space am33xx_adc_tsc_addrs[] = {
-	{
-		.pa_start	= 0x44E0D000,
-		.pa_end		= 0x44E0D000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
 	.master		= &am33xx_l4_wkup_hwmod,
 	.slave		= &am33xx_adc_tsc_hwmod,
 	.clk		= "dpll_core_m4_div2_ck",
-	.addr		= am33xx_adc_tsc_addrs,
 	.user		= OCP_USER_MPU,
 };
 
@@ -452,20 +423,10 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
-	{
-		.pa_start	= 0x4830E000,
-		.pa_end		= 0x4830E000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_lcdc_hwmod,
 	.clk		= "dpll_core_m4_ck",
-	.addr		= am33xx_lcdc_addr_space,
 	.user		= OCP_USER_MPU,
 };
 

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -275,20 +275,10 @@ static struct omap_dma_dev_attr dma_dev_attr = {
 };
 
 /* dma_system */
-static struct omap_hwmod_irq_info omap54xx_dma_system_irqs[] = {
-	{ .name = "0", .irq = 12 + OMAP54XX_IRQ_GIC_START },
-	{ .name = "1", .irq = 13 + OMAP54XX_IRQ_GIC_START },
-	{ .name = "2", .irq = 14 + OMAP54XX_IRQ_GIC_START },
-	{ .name = "3", .irq = 15 + OMAP54XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
 static struct omap_hwmod omap54xx_dma_system_hwmod = {
 	.name		= "dma_system",
 	.class		= &omap54xx_dma_hwmod_class,
 	.clkdm_name	= "dma_clkdm",
-	.mpu_irqs	= omap54xx_dma_system_irqs,
-	.xlate_irq	= omap4_xlate_irq,
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {
@@ -2255,21 +2245,11 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap54xx_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a056fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> dma_system */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__dma_system = {
 	.master		= &omap54xx_l4_cfg_hwmod,
 	.slave		= &omap54xx_dma_system_hwmod,
 	.clk		= "l4_root_clk_div",
-	.addr		= omap54xx_dma_system_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };