Skip to content

L
linux
Commit 8c81b087 authored by Richard Purdie's avatar Richard Purdie Committed by Russell King
Browse files
Options

[ARM PATCH] 2371/1: PXA: Add machine support for the Sharp SL-C7xx series of PDAs 

Patch from Richard Purdie

Add base machine support for the Sharp SL-C7xx series of PDAs 
(Corgi - SL-C700, Shepherd - SL-C750 and Husky - SL-C760). See 
linux-arm-kernel for a support commitment for this code.

Depends on 2370/1 (SCOOP Driver).

Signed-off-by: Richard Purdie
Signed-off-by: Russell King
parent 530f8ae2
Hide whitespace changes
Inline Side-by-side
Showing with 318 additions and 0 deletions
MAINTAINERS
View file @ 8c81b087
......@@ -287,6 +287,11 @@ P: Dave Gilbert
M: linux@treblig.org
S: Maintained
ARM/CORGI MACHINE SUPPORT
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
......
arch/arm/mach-pxa/Kconfig
View file @ 8c81b087
......@@ -18,10 +18,30 @@ config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config PXA_SHARPSL
bool "SHARP SL-C7xx Models (Corgi, Shepherd and Husky)"
select PXA25x
help
Say Y here if you intend to run this kernel on a
Sharp SL-C700 (Corgi), SL-C750 (Shepherd) or a
Sharp SL-C760 (Husky) handheld computer.
endchoice
endmenu
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends PXA_SHARPSL
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends PXA_SHARPSL
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends PXA_SHARPSL
config PXA25x
bool
help
......
arch/arm/mach-pxa/Makefile
View file @ 8c81b087
......@@ -11,6 +11,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_PXA_SHARPSL) += corgi.o
# Support for blinky lights
led-y := leds.o
......
arch/arm/mach-pxa/corgi.c 0 → 100644
View file @ 8c81b087
/*
* Support for Sharp SL-C7xx PDAs
* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches/lubbock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/corgi.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
extern void corgi_ssp_lcdtg_send (u8 adrs, u8 data);
static void __init corgi_init_irq(void)
{
pxa_init_irq();
}
static struct resource corgi_scoop_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config corgi_scoop_setup = {
.io_dir = CORGI_SCOOP_IO_DIR,
.io_out = CORGI_SCOOP_IO_OUT,
};
static struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &corgi_scoop_setup,
},
.num_resources = ARRAY_SIZE(corgi_scoop_resources),
.resource = corgi_scoop_resources,
};
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
};
static struct sharpsl_flash_param_info sharpsl_flash_param;
void corgi_get_param(void)
{
sharpsl_flash_param.comadj_keyword = readl(FLASH_MEM_BASE + FLASH_COMADJ_MAGIC_ADR);
sharpsl_flash_param.comadj = readl(FLASH_MEM_BASE + FLASH_COMADJ_DATA_ADR);
sharpsl_flash_param.phad_keyword = readl(FLASH_MEM_BASE + FLASH_PHAD_MAGIC_ADR);
sharpsl_flash_param.phadadj = readl(FLASH_MEM_BASE + FLASH_PHAD_DATA_ADR);
}
static void __init corgi_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_corgi(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
corgi_get_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
if (machine_is_corgi())
mi->bank[0].size = (32*1024*1024);
else
mi->bank[0].size = (64*1024*1024);
}
static struct map_desc corgi_io_desc[] __initdata = {
/* virtual physical length */
/* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */
/* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */
{ 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
};
static void __init corgi_map_io(void)
{
pxa_map_io();
iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x0158C000;
PGSR1 = 0x00FF0080;
PGSR2 = 0x0001C004;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
}
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
FIXUP(fixup_corgi)
MAPIO(corgi_map_io)
INITIRQ(corgi_init_irq)
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
FIXUP(fixup_corgi)
MAPIO(corgi_map_io)
INITIRQ(corgi_init_irq)
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
FIXUP(fixup_corgi)
MAPIO(corgi_map_io)
INITIRQ(corgi_init_irq)
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
include/asm-arm/arch-pxa/corgi.h 0 → 100644
View file @ 8c81b087
/*
* Hardware specific definitions for SL-C7xx series of PDAs
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ASM_ARCH_CORGI_H
#define __ASM_ARCH_CORGI_H 1
/*
* Corgi GPIO definitions
*/
#define CORGI_GPIO_KEY_INT (0) /* key interrupt */
#define CORGI_GPIO_AC_IN (1)
#define CORGI_GPIO_WAKEUP (3)
#define CORGI_GPIO_AK_INT (4) // Remote Controller
#define CORGI_GPIO_TP_INT (5) /* Touch Panel interrupt */
#define CORGI_GPIO_nSD_CLK (6)
#define CORGI_GPIO_nSD_WP (7)
#define CORGI_GPIO_nSD_DETECT (9)
#define CORGI_GPIO_nSD_INT (10)
#define CORGI_GPIO_MAIN_BAT_LOW (11)
#define CORGI_GPIO_BAT_COVER (11)
#define CORGI_GPIO_LED_ORANGE (13)
#define CORGI_GPIO_CF_CD (14)
#define CORGI_GPIO_CHRG_FULL (16)
#define CORGI_GPIO_CF_IRQ (17)
#define CORGI_GPIO_ADC_TEMP_ON (21)
#define CORGI_GPIO_IR_ON (22)
#define CORGI_GPIO_SD_PWR (33)
#define CORGI_GPIO_CHRG_ON (38)
#define CORGI_GPIO_DISCHARGE_ON (42)
#define CORGI_GPIO_HSYNC (44)
#define CORGI_GPIO_USB_PULLUP (45)
/*
* Corgi Keyboard Definitions
*/
#define CORGI_KEY_STROBE_NUM (12)
#define CORGI_KEY_SENSE_NUM (8)
#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc)
#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000)
#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26)
#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003)
#define CORGI_GPIO_LOW_SENSE_LSHIFT (6)
#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a))
#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a))
#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0)
#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000)
#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f)
#define CORGI_GPIO_KEY_SENSE(a) (58+(a))
#define CORGI_GPIO_KEY_STROBE(a) (66+(a))
/*
* Corgi Interrupts
*/
#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0)
#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1)
#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3)
#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4)
#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5)
#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10)
#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11)
#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14)
#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */
#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */
/*
* Corgi SCOOP GPIOs and Config
*/
#define CORGI_SCP_LED_GREEN SCOOP_GPCR_PA11
#define CORGI_SCP_SWA SCOOP_GPCR_PA12 /* Hinge Switch A */
#define CORGI_SCP_SWB SCOOP_GPCR_PA13 /* Hinge Switch B */
#define CORGI_SCP_MUTE_L SCOOP_GPCR_PA14
#define CORGI_SCP_MUTE_R SCOOP_GPCR_PA15
#define CORGI_SCP_AKIN_PULLUP SCOOP_GPCR_PA16
#define CORGI_SCP_APM_ON SCOOP_GPCR_PA17
#define CORGI_SCP_BACKLIGHT_CONT SCOOP_GPCR_PA18
#define CORGI_SCP_MIC_BIAS SCOOP_GPCR_PA19
#define CORGI_SCOOP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
CORGI_SCP_MIC_BIAS )
#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
/*
* Corgi Parameter Area Definitions
*/
#define FLASH_MEM_BASE 0xa0000a00
#define FLASH_MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 ) | ( b << 8 ) | a )
#define FLASH_COMADJ_MAJIC FLASH_MAGIC_CHG('C','M','A','D')
#define FLASH_COMADJ_MAGIC_ADR 0x00
#define FLASH_COMADJ_DATA_ADR 0x04
#define FLASH_PHAD_MAJIC FLASH_MAGIC_CHG('P','H','A','D')
#define FLASH_PHAD_MAGIC_ADR 0x38
#define FLASH_PHAD_DATA_ADR 0x3C
struct sharpsl_flash_param_info {
unsigned int comadj_keyword;
unsigned int comadj;
unsigned int uuid_keyword;
unsigned char uuid[16];
unsigned int touch_keyword;
unsigned int touch1;
unsigned int touch2;
unsigned int touch3;
unsigned int touch4;
unsigned int adadj_keyword;
unsigned int adadj;
unsigned int phad_keyword;
unsigned int phadadj;
};
#endif /* __ASM_ARCH_CORGI_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7