Commit 8c869eda authored by Andrew Lunn's avatar Andrew Lunn Committed by Mike Turquette

ARM: Orion: EHCI: Add support for enabling clocks

Not all platforms support gating the clock, so it is not an error if
the clock does not exist. However, if it does exist, we should
enable/disable it as appropriate.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarJamie Lentin <jm@lentin.co.uk>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent eee98990
...@@ -96,7 +96,7 @@ void __init kirkwood_clk_init(void) ...@@ -96,7 +96,7 @@ void __init kirkwood_clk_init(void)
ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1); ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
sata0 = kirkwood_register_gate("sata0", CGC_BIT_SATA0); sata0 = kirkwood_register_gate("sata0", CGC_BIT_SATA0);
sata1 = kirkwood_register_gate("sata1", CGC_BIT_SATA1); sata1 = kirkwood_register_gate("sata1", CGC_BIT_SATA1);
kirkwood_register_gate("usb0", CGC_BIT_USB0); usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
kirkwood_register_gate("sdio", CGC_BIT_SDIO); kirkwood_register_gate("sdio", CGC_BIT_SDIO);
kirkwood_register_gate("crypto", CGC_BIT_CRYPTO); kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
kirkwood_register_gate("xor0", CGC_BIT_XOR0); kirkwood_register_gate("xor0", CGC_BIT_XOR0);
...@@ -115,6 +115,7 @@ void __init kirkwood_clk_init(void) ...@@ -115,6 +115,7 @@ void __init kirkwood_clk_init(void)
orion_clkdev_add(NULL, "orion_wdt", tclk); orion_clkdev_add(NULL, "orion_wdt", tclk);
orion_clkdev_add("0", "sata_mv.0", sata0); orion_clkdev_add("0", "sata_mv.0", sata0);
orion_clkdev_add("1", "sata_mv.0", sata1); orion_clkdev_add("1", "sata_mv.0", sata1);
orion_clkdev_add(NULL, "orion-ehci.0", usb0);
} }
/***************************************************************************** /*****************************************************************************
......
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/mbus.h> #include <linux/mbus.h>
#include <linux/clk.h>
#include <plat/ehci-orion.h> #include <plat/ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off)) #define rdl(off) __raw_readl(hcd->regs + (off))
...@@ -198,6 +199,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) ...@@ -198,6 +199,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
struct resource *res; struct resource *res;
struct usb_hcd *hcd; struct usb_hcd *hcd;
struct ehci_hcd *ehci; struct ehci_hcd *ehci;
struct clk *clk;
void __iomem *regs; void __iomem *regs;
int irq, err; int irq, err;
...@@ -238,6 +240,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) ...@@ -238,6 +240,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
goto err2; goto err2;
} }
/* Not all platforms can gate the clock, so it is not
an error if the clock does not exists. */
clk = clk_get(&pdev->dev, NULL);
if (!IS_ERR(clk)) {
clk_prepare_enable(clk);
clk_put(clk);
}
hcd = usb_create_hcd(&ehci_orion_hc_driver, hcd = usb_create_hcd(&ehci_orion_hc_driver,
&pdev->dev, dev_name(&pdev->dev)); &pdev->dev, dev_name(&pdev->dev));
if (!hcd) { if (!hcd) {
...@@ -301,12 +311,18 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) ...@@ -301,12 +311,18 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
static int __exit ehci_orion_drv_remove(struct platform_device *pdev) static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
{ {
struct usb_hcd *hcd = platform_get_drvdata(pdev); struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct clk *clk;
usb_remove_hcd(hcd); usb_remove_hcd(hcd);
iounmap(hcd->regs); iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len); release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd); usb_put_hcd(hcd);
clk = clk_get(&pdev->dev, NULL);
if (!IS_ERR(clk)) {
clk_disable_unprepare(clk);
clk_put(clk);
}
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment