drm/amd/display: Fix DSC enable sequence

[Why]
DSC is enabled before reset link and potentially cause DSC enable fail problem.
[How]
Enable DSC after link is reseted
Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc_link.c

@@ -3296,7 +3296,8 @@ void core_link_enable_stream(
 
 		/* eDP lit up by bios already, no need to enable again. */
 		if (pipe_ctx->stream->signal == SIGNAL_TYPE_EDP &&
-					apply_edp_fast_boot_optimization) {
+					apply_edp_fast_boot_optimization &&
+					!pipe_ctx->stream->timing.flags.DSC) {
 			pipe_ctx->stream->dpms_off = false;
 #if defined(CONFIG_DRM_AMD_DC_HDCP)
 			update_psp_stream_config(pipe_ctx, false);
@@ -3358,8 +3359,10 @@ void core_link_enable_stream(
 		/* Set DPS PPS SDP (AKA "info frames") */
 		if (pipe_ctx->stream->timing.flags.DSC) {
 			if (dc_is_dp_signal(pipe_ctx->stream->signal) ||
-					dc_is_virtual_signal(pipe_ctx->stream->signal))
+					dc_is_virtual_signal(pipe_ctx->stream->signal)) {
+				dp_set_dsc_on_rx(pipe_ctx, true);
 				dp_set_dsc_pps_sdp(pipe_ctx, true);
+			}
 		}
 
 		if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
@@ -3754,7 +3757,8 @@ bool dc_link_should_enable_fec(const struct dc_link *link)
 	if ((link->connector_signal != SIGNAL_TYPE_DISPLAY_PORT_MST &&
 			link->local_sink &&
 			link->local_sink->edid_caps.panel_patch.disable_fec) ||
-			link->connector_signal == SIGNAL_TYPE_EDP) // Disable FEC for eDP
+			(link->connector_signal == SIGNAL_TYPE_EDP &&
+					link->dc->debug.force_enable_edp_fec == false)) // Disable FEC for eDP
 		is_fec_disable = true;
 
 	if (dc_link_is_fec_supported(link) && !link->dc->debug.disable_fec && !is_fec_disable)

drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c

@@ -431,7 +431,7 @@ static void dsc_optc_config_log(struct display_stream_compressor *dsc,
 	DC_LOG_DSC("\tslice_width %d", config->slice_width);
 }
 
-static bool dp_set_dsc_on_rx(struct pipe_ctx *pipe_ctx, bool enable)
+bool dp_set_dsc_on_rx(struct pipe_ctx *pipe_ctx, bool enable)
 {
 	struct dc *dc = pipe_ctx->stream->ctx->dc;
 	struct dc_stream_state *stream = pipe_ctx->stream;
@@ -541,7 +541,7 @@ bool dp_set_dsc_enable(struct pipe_ctx *pipe_ctx, bool enable)
 		goto out;
 
 	if (enable) {
-		if (dp_set_dsc_on_rx(pipe_ctx, true)) {
+		{
 			dp_set_dsc_on_stream(pipe_ctx, true);
 			result = true;
 		}

drivers/gpu/drm/amd/display/dc/dc.h

@@ -541,6 +541,10 @@ struct dc_debug_options {
 	/* Enable dmub aux for legacy ddc */
 	bool enable_dmub_aux_for_legacy_ddc;
 	bool optimize_edp_link_rate; /* eDP ILR */
+	/* force enable edp FEC */
+	bool force_enable_edp_fec;
+	/* FEC/PSR1 sequence enable delay in 100us */
+	uint8_t fec_enable_delay_in100us;
 };
 
 struct dc_debug_data {

drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c

@@ -284,6 +284,8 @@ static bool dmub_psr_copy_settings(struct dmub_psr *dmub,
 	copy_settings_data->debug.u32All = 0;
 	copy_settings_data->debug.bitfields.visual_confirm	= dc->dc->debug.visual_confirm == VISUAL_CONFIRM_PSR;
 	copy_settings_data->debug.bitfields.use_hw_lock_mgr		= 1;
+	copy_settings_data->fec_enable_status = (link->fec_state == dc_link_fec_enabled);
+	copy_settings_data->fec_enable_delay_in100us = link->dc->debug.fec_enable_delay_in100us;
 
 	dc_dmub_srv_cmd_queue(dc->dmub_srv, &cmd);
 	dc_dmub_srv_cmd_execute(dc->dmub_srv);

drivers/gpu/drm/amd/display/dc/inc/dc_link_dp.h

@@ -88,5 +88,7 @@ bool dp_set_dsc_enable(struct pipe_ctx *pipe_ctx, bool enable);
 bool dp_set_dsc_pps_sdp(struct pipe_ctx *pipe_ctx, bool enable);
 void dp_set_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable);
 bool dp_update_dsc_config(struct pipe_ctx *pipe_ctx);
+bool dp_set_dsc_on_rx(struct pipe_ctx *pipe_ctx, bool enable);
+
 
 #endif /* __DC_LINK_DP_H__ */