drm/i915: Don't enable IPS when pixel rate exceeds 95%

Bspec says we shouldn't enable IPS on BDW when the pipe pixel rate
exceeds 95% of the core display clock. Apparently this can cause
underruns.

There's no similar restriction listed for HSW, so leave that one alone
for now.

v2: Add pipe_config_supports_ips() (Chris)
v3: Compare against the max cdclk insted of the current cdclk
v4: Rebased to the latest
v5: Rebased to the latest
v6: Fix for patch style problems

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83497Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/intel_display.c

@@ -6610,12 +6610,38 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
 	return ret;
 }
 
+static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
+				     struct intel_crtc_state *pipe_config)
+{
+	if (pipe_config->pipe_bpp > 24)
+		return false;
+
+	/* HSW can handle pixel rate up to cdclk? */
+	if (IS_HASWELL(dev_priv->dev))
+		return true;
+
+	/*
+	 * FIXME if we compare against max we should then
+	 * increase the cdclk frequency when the current
+	 * value is too low. The other option is to compare
+	 * against the cdclk frequency we're going have post
+	 * modeset (ie. one we computed using other constraints).
+	 * Need to measure whether using a lower cdclk w/o IPS
+	 * is better or worse than a higher cdclk w/ IPS.
+	 */
+	return ilk_pipe_pixel_rate(pipe_config) <=
+		dev_priv->max_cdclk_freq * 95 / 100;
+}
+
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
 				   struct intel_crtc_state *pipe_config)
 {
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
 	pipe_config->ips_enabled = i915.enable_ips &&
-				   hsw_crtc_supports_ips(crtc) &&
-				   pipe_config->pipe_bpp <= 24;
+		hsw_crtc_supports_ips(crtc) &&
+		pipe_config_supports_ips(dev_priv, pipe_config);
 }
 
 static int intel_crtc_compute_config(struct intel_crtc *crtc,

drivers/gpu/drm/i915/intel_drv.h

@@ -1375,7 +1375,7 @@ void ilk_wm_get_hw_state(struct drm_device *dev);
 void skl_wm_get_hw_state(struct drm_device *dev);
 void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
 			  struct skl_ddb_allocation *ddb /* out */);
-
+uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config);
 
 /* intel_sdvo.c */
 bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);

drivers/gpu/drm/i915/intel_pm.c

@@ -1434,23 +1434,22 @@ static void i845_update_wm(struct drm_crtc *unused_crtc)
 	I915_WRITE(FW_BLC, fwater_lo);
 }
 
-static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev,
-				    struct drm_crtc *crtc)
+uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	uint32_t pixel_rate;
 
-	pixel_rate = intel_crtc->config->base.adjusted_mode.crtc_clock;
+	pixel_rate = pipe_config->base.adjusted_mode.crtc_clock;
 
 	/* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
 	 * adjust the pixel_rate here. */
 
-	if (intel_crtc->config->pch_pfit.enabled) {
+	if (pipe_config->pch_pfit.enabled) {
 		uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
-		uint32_t pfit_size = intel_crtc->config->pch_pfit.size;
+		uint32_t pfit_size = pipe_config->pch_pfit.size;
+
+		pipe_w = pipe_config->pipe_src_w;
+		pipe_h = pipe_config->pipe_src_h;
 
-		pipe_w = intel_crtc->config->pipe_src_w;
-		pipe_h = intel_crtc->config->pipe_src_h;
 		pfit_w = (pfit_size >> 16) & 0xFFFF;
 		pfit_h = pfit_size & 0xFFFF;
 		if (pipe_w < pfit_w)
@@ -2066,7 +2065,7 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
-	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
+	p->pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
 
 	if (crtc->primary->state->fb)
 		p->pri.bytes_per_pixel =