Merge tag 'linux-can-fixes-for-6.1-20221124' of...

Merge tag 'linux-can-fixes-for-6.1-20221124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
linux-can-fixes-for-6.1-20221124

this is a pull request of 8 patches for net/master.

Ziyang Xuan contributes a patch for the can327, fixing a potential SKB
leak when the netdev is down.

Heiko Schocher's patch for the sja1000 driver fixes the width of the
definition of the OCR_MODE_MASK.

Zhang Changzhong contributes 4 patches. In the sja1000_isa, cc770, and
m_can_pci drivers the error path in the probe() function and in case
of the etas_es58x a function that is called by probe() are fixed.

Jiasheng Jiang add a missing check for the return value of the
devm_clk_get() in the m_can driver.

Yasushi SHOJI's patch for the mcba_usb fixes setting of the external
termination resistor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/can327.c

@@ -263,8 +263,10 @@ static void can327_feed_frame_to_netdev(struct can327 *elm, struct sk_buff *skb)
 {
 	lockdep_assert_held(&elm->lock);
 
-	if (!netif_running(elm->dev))
+	if (!netif_running(elm->dev)) {
+		kfree_skb(skb);
 		return;
+	}
 
 	/* Queue for NAPI pickup.
 	 * rx-offload will update stats and LEDs for us.

drivers/net/can/cc770/cc770_isa.c

@@ -264,22 +264,24 @@ static int cc770_isa_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev,
 			"couldn't register device (err=%d)\n", err);
-		goto exit_unmap;
+		goto exit_free;
 	}
 
 	dev_info(&pdev->dev, "device registered (reg_base=0x%p, irq=%d)\n",
 		 priv->reg_base, dev->irq);
 	return 0;
 
- exit_unmap:
+exit_free:
+	free_cc770dev(dev);
+exit_unmap:
 	if (mem[idx])
 		iounmap(base);
- exit_release:
+exit_release:
 	if (mem[idx])
 		release_mem_region(mem[idx], iosize);
 	else
 		release_region(port[idx], iosize);
- exit:
+exit:
 	return err;
 }
 

drivers/net/can/m_can/m_can.c

@@ -1909,7 +1909,7 @@ int m_can_class_get_clocks(struct m_can_classdev *cdev)
 	cdev->hclk = devm_clk_get(cdev->dev, "hclk");
 	cdev->cclk = devm_clk_get(cdev->dev, "cclk");
 
-	if (IS_ERR(cdev->cclk)) {
+	if (IS_ERR(cdev->hclk) || IS_ERR(cdev->cclk)) {
 		dev_err(cdev->dev, "no clock found\n");
 		ret = -ENODEV;
 	}

drivers/net/can/m_can/m_can_pci.c

@@ -120,7 +120,7 @@ static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
 
 	ret = pci_alloc_irq_vectors(pci, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
-		return ret;
+		goto err_free_dev;
 
 	mcan_class->dev = &pci->dev;
 	mcan_class->net->irq = pci_irq_vector(pci, 0);
@@ -132,7 +132,7 @@ static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
 
 	ret = m_can_class_register(mcan_class);
 	if (ret)
-		goto err;
+		goto err_free_irq;
 
 	/* Enable interrupt control at CAN wrapper IP */
 	writel(0x1, base + CTL_CSR_INT_CTL_OFFSET);
@@ -144,8 +144,10 @@ static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
 
 	return 0;
 
-err:
+err_free_irq:
 	pci_free_irq_vectors(pci);
+err_free_dev:
+	m_can_class_free_dev(mcan_class->net);
 	return ret;
 }
 
@@ -161,6 +163,7 @@ static void m_can_pci_remove(struct pci_dev *pci)
 	writel(0x0, priv->base + CTL_CSR_INT_CTL_OFFSET);
 
 	m_can_class_unregister(mcan_class);
+	m_can_class_free_dev(mcan_class->net);
 	pci_free_irq_vectors(pci);
 }
 

drivers/net/can/sja1000/sja1000_isa.c

@@ -202,22 +202,24 @@ static int sja1000_isa_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
-		goto exit_unmap;
+		goto exit_free;
 	}
 
 	dev_info(&pdev->dev, "%s device registered (reg_base=0x%p, irq=%d)\n",
 		 DRV_NAME, priv->reg_base, dev->irq);
 	return 0;
 
- exit_unmap:
+exit_free:
+	free_sja1000dev(dev);
+exit_unmap:
 	if (mem[idx])
 		iounmap(base);
- exit_release:
+exit_release:
 	if (mem[idx])
 		release_mem_region(mem[idx], iosize);
 	else
 		release_region(port[idx], iosize);
- exit:
+exit:
 	return err;
 }
 

drivers/net/can/usb/etas_es58x/es58x_core.c

@@ -2091,8 +2091,11 @@ static int es58x_init_netdev(struct es58x_device *es58x_dev, int channel_idx)
 	netdev->dev_port = channel_idx;
 
 	ret = register_candev(netdev);
-	if (ret)
+	if (ret) {
+		es58x_dev->netdev[channel_idx] = NULL;
+		free_candev(netdev);
 		return ret;
+	}
 
 	netdev_queue_set_dql_min_limit(netdev_get_tx_queue(netdev, 0),
 				       es58x_dev->param->dql_min_limit);

drivers/net/can/usb/mcba_usb.c

@@ -47,6 +47,10 @@
 #define MCBA_VER_REQ_USB 1
 #define MCBA_VER_REQ_CAN 2
 
+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */
+#define MCBA_VER_TERMINATION_ON 0
+#define MCBA_VER_TERMINATION_OFF 1
+
 #define MCBA_SIDL_EXID_MASK 0x8
 #define MCBA_DLC_MASK 0xf
 #define MCBA_DLC_RTR_MASK 0x40
@@ -463,7 +467,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
 		priv->usb_ka_first_pass = false;
 	}
 
-	if (msg->termination_state)
+	if (msg->termination_state == MCBA_VER_TERMINATION_ON)
 		priv->can.termination = MCBA_TERMINATION_ENABLED;
 	else
 		priv->can.termination = MCBA_TERMINATION_DISABLED;
@@ -785,9 +789,9 @@ static int mcba_set_termination(struct net_device *netdev, u16 term)
 	};
 
 	if (term == MCBA_TERMINATION_ENABLED)
-		usb_msg.termination = 1;
+		usb_msg.termination = MCBA_VER_TERMINATION_ON;
 	else
-		usb_msg.termination = 0;
+		usb_msg.termination = MCBA_VER_TERMINATION_OFF;
 
 	mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
 

include/linux/can/platform/sja1000.h

@@ -14,7 +14,7 @@
 #define OCR_MODE_TEST     0x01
 #define OCR_MODE_NORMAL   0x02
 #define OCR_MODE_CLOCK    0x03
-#define OCR_MODE_MASK     0x07
+#define OCR_MODE_MASK     0x03
 #define OCR_TX0_INVERT    0x04
 #define OCR_TX0_PULLDOWN  0x08
 #define OCR_TX0_PULLUP    0x10