Commit 8d545f32 authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Nicolas Ferre

ARM: at91/dt: sama5d4 xplained: add regulators for v(q)mmc1 supplies

Add vcc_mmc1 fixed regulator to remove the 'no vmmc regulator found' warning
when probing the mmc1 device.
Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 1b53e341
...@@ -106,6 +106,8 @@ phy0: ethernet-phy@1 { ...@@ -106,6 +106,8 @@ phy0: ethernet-phy@1 {
mmc1: mmc@fc000000 { mmc1: mmc@fc000000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
vmmc-supply = <&vcc_mmc1_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "okay"; status = "okay";
slot@0 { slot@0 {
reg = <0>; reg = <0>;
...@@ -243,4 +245,22 @@ d10 { ...@@ -243,4 +245,22 @@ d10 {
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
vcc_3v3_reg: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "VCC 3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vcc_mmc1_reg: fixedregulator@1 {
compatible = "regulator-fixed";
gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
};
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment