Commit 8d602cf5 authored by Ivan Djelic's avatar Ivan Djelic Committed by David Woodhouse

ARM: OMAP3: gpmc: add BCH ecc api and modes

This patch adds a simple BCH ecc computation api, similar to the
existing Hamming ecc api. It is intended to be used by the MTD layer.
It implements the following features:

- support 4-bit and 8-bit ecc computation
- do not protect user bytes in spare area, only data area is protected
- ecc for an erased NAND page (0xFFs) is also a sequence of 0xFFs

This last feature is obtained by adding a constant polynomial to
the hardware computed ecc. It allows to correct bitflips in blank pages
and is extremely useful to support filesystems such as UBIFS, which expect
erased pages to contain only 0xFFs.

This api has been tested on an OMAP3630 board.

Artem: The OMAP maintainer Tony Lindgren gave us his blessing for merging
this patch via the MTD tree.
Signed-off-by: default avatarIvan Djelic <ivan.djelic@parrot.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 1951f2f7
...@@ -49,6 +49,7 @@ ...@@ -49,6 +49,7 @@
#define GPMC_ECC_CONTROL 0x1f8 #define GPMC_ECC_CONTROL 0x1f8
#define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200 #define GPMC_ECC1_RESULT 0x200
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
#define GPMC_CS0_OFFSET 0x60 #define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30 #define GPMC_CS_SIZE 0x30
...@@ -920,3 +921,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) ...@@ -920,3 +921,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
#ifdef CONFIG_ARCH_OMAP3
/**
* gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
* @cs: chip select number
* @nsectors: how many 512-byte sectors to process
* @nerrors: how many errors to correct per sector (4 or 8)
*
* This function must be executed before any call to gpmc_enable_hwecc_bch.
*/
int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
{
/* check if ecc module is in use */
if (gpmc_ecc_used != -EINVAL)
return -EINVAL;
/* support only OMAP3 class */
if (!cpu_is_omap34xx()) {
printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
return -EINVAL;
}
/*
* For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
* Other chips may be added if confirmed to work.
*/
if ((nerrors == 4) &&
(!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
return -EINVAL;
}
/* sanity check */
if (nsectors > 8) {
printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
nsectors);
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
/**
* gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
* @cs: chip select number
* @mode: read/write mode
* @dev_width: device bus width(1 for x16, 0 for x8)
* @nsectors: how many 512-byte sectors to process
* @nerrors: how many errors to correct per sector (4 or 8)
*/
int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
int nerrors)
{
unsigned int val;
/* check if ecc module is in use */
if (gpmc_ecc_used != -EINVAL)
return -EINVAL;
gpmc_ecc_used = cs;
/* clear ecc and enable bits */
gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
/*
* When using BCH, sector size is hardcoded to 512 bytes.
* Here we are using wrapping mode 6 both for reading and writing, with:
* size0 = 0 (no additional protected byte in spare area)
* size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
/* BCH configuration */
val = ((1 << 16) | /* enable BCH */
(((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
(0x06 << 8) | /* wrap mode = 6 */
(dev_width << 7) | /* bus width */
(((nsectors-1) & 0x7) << 4) | /* number of sectors */
(cs << 1) | /* ECC CS */
(0x1)); /* enable ECC */
gpmc_write_reg(GPMC_ECC_CONFIG, val);
gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
return 0;
}
EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
/**
* gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
* @cs: chip select number
* @dat: The pointer to data on which ecc is computed
* @ecc: The ecc output buffer
*/
int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
{
int i;
unsigned long nsectors, reg, val1, val2;
if (gpmc_ecc_used != cs)
return -EINVAL;
nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
for (i = 0; i < nsectors; i++) {
reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
/* Read hw-computed remainder */
val1 = gpmc_read_reg(reg + 0);
val2 = gpmc_read_reg(reg + 4);
/*
* Add constant polynomial to remainder, in order to get an ecc
* sequence of 0xFFs for a buffer filled with 0xFFs; and
* left-justify the resulting polynomial.
*/
*ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
*ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
*ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
*ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
*ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
*ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
*ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
}
gpmc_ecc_used = -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
/**
* gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
* @cs: chip select number
* @dat: The pointer to data on which ecc is computed
* @ecc: The ecc output buffer
*/
int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
{
int i;
unsigned long nsectors, reg, val1, val2, val3, val4;
if (gpmc_ecc_used != cs)
return -EINVAL;
nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
for (i = 0; i < nsectors; i++) {
reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
/* Read hw-computed remainder */
val1 = gpmc_read_reg(reg + 0);
val2 = gpmc_read_reg(reg + 4);
val3 = gpmc_read_reg(reg + 8);
val4 = gpmc_read_reg(reg + 12);
/*
* Add constant polynomial to remainder, in order to get an ecc
* sequence of 0xFFs for a buffer filled with 0xFFs.
*/
*ecc++ = 0xef ^ (val4 & 0xFF);
*ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
*ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
*ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
*ecc++ = 0xed ^ (val3 & 0xFF);
*ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
*ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
*ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
*ecc++ = 0x97 ^ (val2 & 0xFF);
*ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
*ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
*ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
*ecc++ = 0xb5 ^ (val1 & 0xFF);
}
gpmc_ecc_used = -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
#endif /* CONFIG_ARCH_OMAP3 */
...@@ -92,6 +92,8 @@ enum omap_ecc { ...@@ -92,6 +92,8 @@ enum omap_ecc {
OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
/* 1-bit ecc: stored at beginning of spare area as romcode */ /* 1-bit ecc: stored at beginning of spare area as romcode */
OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
}; };
/* /*
...@@ -157,4 +159,13 @@ extern int gpmc_nand_write(int cs, int cmd, int wval); ...@@ -157,4 +159,13 @@ extern int gpmc_nand_write(int cs, int cmd, int wval);
int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
#ifdef CONFIG_ARCH_OMAP3
int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
int nerrors);
int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
#endif /* CONFIG_ARCH_OMAP3 */
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment