Merge branches 'at91/gpio', 'at91/ioremap', 'drivers/macb-gem-cleanup' and...

Merge branches 'at91/gpio', 'at91/ioremap', 'drivers/macb-gem-cleanup' and 'msm/misc' into next/cleanup

arch/arm/Kconfig.debug

@@ -255,6 +255,43 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
+	config DEBUG_MSM_UART1
+		bool "Kernel low-level debugging messages via MSM UART1"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the first serial port on MSM devices.
+
+	config DEBUG_MSM_UART2
+		bool "Kernel low-level debugging messages via MSM UART2"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the second serial port on MSM devices.
+
+	config DEBUG_MSM_UART3
+		bool "Kernel low-level debugging messages via MSM UART3"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on MSM devices.
+
+	config DEBUG_MSM8660_UART
+		bool "Kernel low-level debugging messages via MSM 8660 UART"
+		depends on ARCH_MSM8X60
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8660 devices.
+
+	config DEBUG_MSM8960_UART
+		bool "Kernel low-level debugging messages via MSM 8960 UART"
+		depends on ARCH_MSM8960
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8960 devices.
+
 endchoice
 
 config EARLY_PRINTK

arch/arm/mach-msm/Kconfig

@@ -13,7 +13,6 @@ config ARCH_MSM7X00A
 	select CPU_V6
 	select GPIO_MSM_V1
 	select MSM_PROC_COMM
-	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_MSM7X30
 	bool "MSM7x30"
@@ -25,7 +24,6 @@ config ARCH_MSM7X30
 	select MSM_GPIOMUX
 	select GPIO_MSM_V1
 	select MSM_PROC_COMM
-	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_QSD8X50
 	bool "QSD8X50"
@@ -37,7 +35,6 @@ config ARCH_QSD8X50
 	select MSM_GPIOMUX
 	select GPIO_MSM_V1
 	select MSM_PROC_COMM
-	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_MSM8X60
 	bool "MSM8X60"
@@ -63,6 +60,9 @@ config ARCH_MSM8960
 
 endchoice
 
+config MSM_HAS_DEBUG_UART_HS
+	bool
+
 config MSM_SOC_REV_A
 	bool
 config  ARCH_MSM_SCORPIONMP
@@ -73,9 +73,6 @@ config  ARCH_MSM_ARM11
 config  ARCH_MSM_SCORPION
 	bool
 
-config HAS_MSM_DEBUG_UART_PHYS
-	bool
-
 config  MSM_VIC
 	bool
 
@@ -152,32 +149,6 @@ config MACH_MSM8960_RUMI3
 
 endmenu
 
-config MSM_DEBUG_UART
-	int
-	default 1 if MSM_DEBUG_UART1
-	default 2 if MSM_DEBUG_UART2
-	default 3 if MSM_DEBUG_UART3
-
-if HAS_MSM_DEBUG_UART_PHYS
-choice
-	prompt "Debug UART"
-
-	default MSM_DEBUG_UART_NONE
-
-	config MSM_DEBUG_UART_NONE
-		bool "None"
-
-	config MSM_DEBUG_UART1
-		bool "UART1"
-
-	config MSM_DEBUG_UART2
-		bool "UART2"
-
-	config MSM_DEBUG_UART3
-		bool "UART3"
-endchoice
-endif
-
 config MSM_SMD_PKG3
 	bool
 

arch/arm/mach-msm/include/mach/debug-macro.S

-/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+/*
  *
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -14,40 +15,52 @@
  *
  */
 
-
-
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
-#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
 	.macro	addruart, rp, rv, tmp
+#ifdef MSM_DEBUG_UART_PHYS
 	ldr	\rp, =MSM_DEBUG_UART_PHYS
 	ldr	\rv, =MSM_DEBUG_UART_BASE
+#endif
 	.endm
 
-	.macro	senduart,rd,rx
+	.macro	senduart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+	@ Write the 1 character to UARTDM_TF
+	str	\rd, [\rx, #0x70]
+#else
 	teq	\rx, #0
 	strne	\rd, [\rx, #0x0C]
+#endif
 	.endm
 
-	.macro	waituart,rd,rx
+	.macro	waituart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+	@ check for TX_EMT in UARTDM_SR
+	ldr	\rd, [\rx, #0x08]
+	tst	\rd, #0x08
+	bne	1002f
+	@ wait for TXREADY in UARTDM_ISR
+1001:	ldr	\rd, [\rx, #0x14]
+	tst	\rd, #0x80
+	beq 	1001b
+1002:
+	@ Clear TX_READY by writing to the UARTDM_CR register
+	mov	\rd, #0x300
+	str	\rd, [\rx, #0x10]
+	@ Write 0x1 to NCF register
+	mov 	\rd, #0x1
+	str	\rd, [\rx, #0x40]
+	@ UARTDM reg. Read to induce delay
+	ldr	\rd, [\rx, #0x08]
+#else
 	@ wait for TX_READY
 1001:	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x04
 	beq	1001b
-	.endm
-#else
-	.macro  addruart, rp, rv, tmp
-	mov	\rv, #0xff000000
-	orr	\rv, \rv, #0x00f00000
-	.endm
-
-	.macro	senduart,rd,rx
-	.endm
-
-	.macro	waituart,rd,rx
-	.endm
 #endif
+	.endm
 
-	.macro	busyuart,rd,rx
+	.macro	busyuart, rd, rx
 	.endm

arch/arm/mach-msm/include/mach/msm_iomap-7x00.h

@@ -78,18 +78,6 @@
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
-#endif
-
 #define MSM_SDC1_PHYS         0xA0400000
 #define MSM_SDC1_SIZE         SZ_4K
 

arch/arm/mach-msm/include/mach/msm_iomap-7x30.h

@@ -89,18 +89,6 @@
 #define MSM_UART3_PHYS        0xACC00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
-#endif
-
 #define MSM_MDC_BASE	      IOMEM(0xE0200000)
 #define MSM_MDC_PHYS	      0xAA500000
 #define MSM_MDC_SIZE	      SZ_1M

arch/arm/mach-msm/include/mach/msm_iomap-8960.h

@@ -45,4 +45,9 @@
 #define MSM8960_TMR0_PHYS	0x0208A000
 #define MSM8960_TMR0_SIZE	SZ_4K
 
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_PHYS	0x16440000
+#endif
+
 #endif

arch/arm/mach-msm/include/mach/msm_iomap-8x50.h

@@ -83,18 +83,6 @@
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
-#endif
-
 #define MSM_MDC_BASE	      IOMEM(0xE0200000)
 #define MSM_MDC_PHYS	      0xAA500000
 #define MSM_MDC_SIZE	      SZ_1M

arch/arm/mach-msm/include/mach/msm_iomap-8x60.h

@@ -62,4 +62,9 @@
 #define MSM8X60_TMR0_PHYS	0x02040000
 #define MSM8X60_TMR0_SIZE	SZ_4K
 
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_PHYS	0x19C40000
+#endif
+
 #endif

arch/arm/mach-msm/include/mach/msm_iomap.h

@@ -55,6 +55,18 @@
 
 #include "msm_iomap-8960.h"
 
+#define MSM_DEBUG_UART_SIZE	SZ_4K
+#if defined(CONFIG_DEBUG_MSM_UART1)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART2)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART3)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
+#endif
+
 /* Virtual addresses shared across all MSM targets. */
 #define MSM_CSR_BASE		IOMEM(0xE0001000)
 #define MSM_QGIC_DIST_BASE	IOMEM(0xF0000000)

arch/arm/mach-msm/include/mach/uncompress.h

-/* arch/arm/mach-msm/include/mach/uncompress.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,17 +14,40 @@
  */
 
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+#define __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include <asm/processor.h>
+#include <mach/msm_iomap.h>
+
+#define UART_CSR      (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
+#define UART_TF       (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
 
-#include "hardware.h"
-#include "linux/io.h"
-#include "mach/msm_iomap.h"
+#define UART_DM_SR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
+#define UART_DM_CR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
+#define UART_DM_ISR   (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
+#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
+#define UART_DM_TF    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
 
 static void putc(int c)
 {
 #if defined(MSM_DEBUG_UART_PHYS)
-	unsigned base = MSM_DEBUG_UART_PHYS;
-	while (!(readl(base + 0x08) & 0x04)) ;
-	writel(c, base + 0x0c);
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+	/*
+	 * Wait for TX_READY to be set; but skip it if we have a
+	 * TX underrun.
+	 */
+	if (UART_DM_SR & 0x08)
+		while (!(UART_DM_ISR & 0x80))
+			cpu_relax();
+
+	UART_DM_CR = 0x300;
+	UART_DM_NCHAR = 0x1;
+	UART_DM_TF = c;
+#else
+	while (!(UART_CSR & 0x04))
+		cpu_relax();
+	UART_TF = c;
+#endif
 #endif
 }
 

arch/arm/mach-msm/io.c

@@ -47,7 +47,8 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE(GPIO1, MSM7X00),
 	MSM_CHIP_DEVICE(GPIO2, MSM7X00),
 	MSM_DEVICE(CLK_CTL),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+	defined(CONFIG_DEBUG_MSM_UART3)
 	MSM_DEVICE(DEBUG_UART),
 #endif
 #ifdef CONFIG_ARCH_MSM7X30
@@ -84,7 +85,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
 	MSM_DEVICE(SCPLL),
 	MSM_DEVICE(AD5),
 	MSM_DEVICE(MDC),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+	defined(CONFIG_DEBUG_MSM_UART3)
 	MSM_DEVICE(DEBUG_UART),
 #endif
 	{
@@ -109,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE(TMR0, MSM8X60),
 	MSM_DEVICE(ACC),
 	MSM_DEVICE(GCC),
+#ifdef CONFIG_DEBUG_MSM8660_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
 };
 
 void __init msm_map_msm8x60_io(void)
@@ -123,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
 	MSM_CHIP_DEVICE(TMR, MSM8960),
 	MSM_CHIP_DEVICE(TMR0, MSM8960),
+#ifdef CONFIG_DEBUG_MSM8960_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
 };
 
 void __init msm_map_msm8960_io(void)
@@ -146,7 +154,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(SAW),
 	MSM_DEVICE(GCC),
 	MSM_DEVICE(TCSR),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+	defined(CONFIG_DEBUG_MSM_UART3)
 	MSM_DEVICE(DEBUG_UART),
 #endif
 	{

arch/arm/mach-msm/platsmp.c

@@ -79,7 +79,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
 	ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
 				SCM_FLAG_COLDBOOT_CPU1);
 	if (ret == 0) {
-		void *sc1_base_ptr;
+		void __iomem *sc1_base_ptr;
 		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
 		if (sc1_base_ptr) {
 			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);