Skip to content

L
linux
Commit 8d96286a authored by stephen hemminger's avatar stephen hemminger Committed by David S. Miller
Browse files
Options

bnx2x: make local function static and remove dead code 

Make many functions that are only used in one file static.
Remove dead code for override_led_value.
Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fa274cb7
Hide whitespace changes
Inline Side-by-side
Showing with 62 additions and 242 deletions
drivers/net/bnx2x/bnx2x.h
View file @ 8d96286a
......@@ -1288,15 +1288,11 @@ struct bnx2x_func_init_params {
#define WAIT_RAMROD_POLL 0x01
#define WAIT_RAMROD_COMMON 0x02
int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
int *state_p, int flags);
/* dmae */
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
u32 len32);
void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
u32 addr, u32 len);
void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx);
u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type);
u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode);
......@@ -1307,7 +1303,6 @@ int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param);
void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
void bnx2x_calc_fc_adv(struct bnx2x *bp);
int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
......
drivers/net/bnx2x/bnx2x_cmn.c
View file @ 8d96286a
......@@ -25,6 +25,7 @@
#include "bnx2x_init.h"
static int bnx2x_setup_irqs(struct bnx2x *bp);
/* free skb in the packet ring at pos idx
* return idx of last bd freed
......@@ -2187,7 +2188,7 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p)
}
int bnx2x_setup_irqs(struct bnx2x *bp)
static int bnx2x_setup_irqs(struct bnx2x *bp)
{
int rc = 0;
if (bp->flags & USING_MSIX_FLAG) {
......
drivers/net/bnx2x/bnx2x_cmn.h
View file @ 8d96286a
......@@ -116,13 +116,6 @@ void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
*/
void bnx2x_int_enable(struct bnx2x *bp);
/**
* Disable HW interrupts.
*
* @param bp
*/
void bnx2x_int_disable(struct bnx2x *bp);
/**
* Disable interrupts. This function ensures that there are no
* ISRs or SP DPCs (sp_task) are running after it returns.
......@@ -191,17 +184,6 @@ void bnx2x_free_mem(struct bnx2x *bp);
int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp,
int is_leading);
/**
* Bring down an eth client.
*
* @param bp
* @param p
*
* @return int
*/
int bnx2x_stop_fw_client(struct bnx2x *bp,
struct bnx2x_client_ramrod_params *p);
/**
* Set number of queues according to mode
*
......@@ -250,34 +232,6 @@ int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource);
*/
void bnx2x_set_eth_mac(struct bnx2x *bp, int set);
#ifdef BCM_CNIC
/**
* Set iSCSI MAC(s) at the next enties in the CAM after the ETH
* MAC(s). The function will wait until the ramrod completion
* returns.
*
* @param bp driver handle
* @param set set or clear the CAM entry
*
* @return 0 if cussess, -ENODEV if ramrod doesn't return.
*/
int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set);
#endif
/**
* Initialize status block in FW and HW
*
* @param bp driver handle
* @param dma_addr_t mapping
* @param int sb_id
* @param int vfid
* @param u8 vf_valid
* @param int fw_sb_id
* @param int igu_sb_id
*/
void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
u8 vf_valid, int fw_sb_id, int igu_sb_id);
/**
* Set MAC filtering configurations.
*
......@@ -326,7 +280,6 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe);
* @return int
*/
int bnx2x_func_start(struct bnx2x *bp);
int bnx2x_func_stop(struct bnx2x *bp);
/**
* Prepare ILT configurations according to current driver
......@@ -395,14 +348,6 @@ int bnx2x_enable_msix(struct bnx2x *bp);
*/
int bnx2x_enable_msi(struct bnx2x *bp);
/**
* Request IRQ vectors from OS.
*
* @param bp
*
* @return int
*/
int bnx2x_setup_irqs(struct bnx2x *bp);
/**
* NAPI callback
*
......
drivers/net/bnx2x/bnx2x_init_ops.h
View file @ 8d96286a
......@@ -16,7 +16,9 @@
#define BNX2X_INIT_OPS_H
static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
u32 addr, u32 len);
static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
u32 len)
......@@ -589,7 +591,7 @@ static int bnx2x_ilt_client_mem_op(struct bnx2x *bp, int cli_num, u8 memop)
return rc;
}
int bnx2x_ilt_mem_op(struct bnx2x *bp, u8 memop)
static int bnx2x_ilt_mem_op(struct bnx2x *bp, u8 memop)
{
int rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_CDU, memop);
if (!rc)
......@@ -635,7 +637,7 @@ static void bnx2x_ilt_line_init_op(struct bnx2x *bp, struct bnx2x_ilt *ilt,
}
}
void bnx2x_ilt_boundry_init_op(struct bnx2x *bp,
static void bnx2x_ilt_boundry_init_op(struct bnx2x *bp,
struct ilt_client_info *ilt_cli,
u32 ilt_start, u8 initop)
{
......@@ -688,8 +690,10 @@ void bnx2x_ilt_boundry_init_op(struct bnx2x *bp,
}
}
void bnx2x_ilt_client_init_op_ilt(struct bnx2x *bp, struct bnx2x_ilt *ilt,
struct ilt_client_info *ilt_cli, u8 initop)
static void bnx2x_ilt_client_init_op_ilt(struct bnx2x *bp,
struct bnx2x_ilt *ilt,
struct ilt_client_info *ilt_cli,
u8 initop)
{
int i;
......@@ -703,8 +707,8 @@ void bnx2x_ilt_client_init_op_ilt(struct bnx2x *bp, struct bnx2x_ilt *ilt,
bnx2x_ilt_boundry_init_op(bp, ilt_cli, ilt->start_line, initop);
}
void bnx2x_ilt_client_init_op(struct bnx2x *bp,
struct ilt_client_info *ilt_cli, u8 initop)
static void bnx2x_ilt_client_init_op(struct bnx2x *bp,
struct ilt_client_info *ilt_cli, u8 initop)
{
struct bnx2x_ilt *ilt = BP_ILT(bp);
......@@ -720,7 +724,7 @@ static void bnx2x_ilt_client_id_init_op(struct bnx2x *bp,
bnx2x_ilt_client_init_op(bp, ilt_cli, initop);
}
void bnx2x_ilt_init_op(struct bnx2x *bp, u8 initop)
static void bnx2x_ilt_init_op(struct bnx2x *bp, u8 initop)
{
bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_CDU, initop);
bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_QM, initop);
......@@ -752,7 +756,7 @@ static void bnx2x_ilt_init_client_psz(struct bnx2x *bp, int cli_num,
* called during init common stage, ilt clients should be initialized
* prioir to calling this function
*/
void bnx2x_ilt_init_page_size(struct bnx2x *bp, u8 initop)
static void bnx2x_ilt_init_page_size(struct bnx2x *bp, u8 initop)
{
bnx2x_ilt_init_client_psz(bp, ILT_CLIENT_CDU,
PXP2_REG_RQ_CDU_P_SIZE, initop);
......@@ -772,8 +776,8 @@ void bnx2x_ilt_init_page_size(struct bnx2x *bp, u8 initop)
#define QM_INIT(cid_cnt) (cid_cnt > QM_INIT_MIN_CID_COUNT)
/* called during init port stage */
void bnx2x_qm_init_cid_count(struct bnx2x *bp, int qm_cid_count,
u8 initop)
static void bnx2x_qm_init_cid_count(struct bnx2x *bp, int qm_cid_count,
u8 initop)
{
int port = BP_PORT(bp);
......@@ -814,8 +818,8 @@ static void bnx2x_qm_set_ptr_table(struct bnx2x *bp, int qm_cid_count)
}
/* called during init common stage */
void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count,
u8 initop)
static void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count,
u8 initop)
{
if (!QM_INIT(qm_cid_count))
return;
......@@ -836,8 +840,8 @@ void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count,
****************************************************************************/
/* called during init func stage */
void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
dma_addr_t t2_mapping, int src_cid_count)
static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
dma_addr_t t2_mapping, int src_cid_count)
{
int i;
int port = BP_PORT(bp);
......
drivers/net/bnx2x/bnx2x_link.c
View file @ 8d96286a
......@@ -181,6 +181,12 @@
(_bank + (_addr & 0xf)), \
_val)
static u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 *ret_val);
static u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 val);
static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
{
u32 val = REG_RD(bp, reg);
......@@ -594,7 +600,7 @@ static u8 bnx2x_bmac2_enable(struct link_params *params,
return 0;
}
u8 bnx2x_bmac_enable(struct link_params *params,
static u8 bnx2x_bmac_enable(struct link_params *params,
struct link_vars *vars,
u8 is_lb)
{
......@@ -2537,122 +2543,6 @@ static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy,
}
}
/*
*------------------------------------------------------------------------
* bnx2x_override_led_value -
*
* Override the led value of the requested led
*
*------------------------------------------------------------------------
*/
u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port,
u32 led_idx, u32 value)
{
u32 reg_val;
/* If port 0 then use EMAC0, else use EMAC1*/
u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
DP(NETIF_MSG_LINK,
"bnx2x_override_led_value() port %x led_idx %d value %d\n",
port, led_idx, value);
switch (led_idx) {
case 0: /* 10MB led */
/* Read the current value of the LED register in
the EMAC block */
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
/* Set the OVERRIDE bit to 1 */
reg_val |= EMAC_LED_OVERRIDE;
/* If value is 1, set the 10M_OVERRIDE bit,
otherwise reset it.*/
reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) :
(reg_val & ~EMAC_LED_10MB_OVERRIDE);
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
break;
case 1: /*100MB led */
/*Read the current value of the LED register in
the EMAC block */
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
/* Set the OVERRIDE bit to 1 */
reg_val |= EMAC_LED_OVERRIDE;
/* If value is 1, set the 100M_OVERRIDE bit,
otherwise reset it.*/
reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) :
(reg_val & ~EMAC_LED_100MB_OVERRIDE);
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
break;
case 2: /* 1000MB led */
/* Read the current value of the LED register in the
EMAC block */
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
/* Set the OVERRIDE bit to 1 */
reg_val |= EMAC_LED_OVERRIDE;
/* If value is 1, set the 1000M_OVERRIDE bit, otherwise
reset it. */
reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) :
(reg_val & ~EMAC_LED_1000MB_OVERRIDE);
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
break;
case 3: /* 2500MB led */
/* Read the current value of the LED register in the
EMAC block*/
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
/* Set the OVERRIDE bit to 1 */
reg_val |= EMAC_LED_OVERRIDE;
/* If value is 1, set the 2500M_OVERRIDE bit, otherwise
reset it.*/
reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) :
(reg_val & ~EMAC_LED_2500MB_OVERRIDE);
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
break;
case 4: /*10G led */
if (port == 0) {
REG_WR(bp, NIG_REG_LED_10G_P0,
value);
} else {
REG_WR(bp, NIG_REG_LED_10G_P1,
value);
}
break;
case 5: /* TRAFFIC led */
/* Find if the traffic control is via BMAC or EMAC */
if (port == 0)
reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN);
else
reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN);
/* Override the traffic led in the EMAC:*/
if (reg_val == 1) {
/* Read the current value of the LED register in
the EMAC block */
reg_val = REG_RD(bp, emac_base +
EMAC_REG_EMAC_LED);
/* Set the TRAFFIC_OVERRIDE bit to 1 */
reg_val |= EMAC_LED_OVERRIDE;
/* If value is 1, set the TRAFFIC bit, otherwise
reset it.*/
reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) :
(reg_val & ~EMAC_LED_TRAFFIC);
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
} else { /* Override the traffic led in the BMAC: */
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
+ port*4, 1);
REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4,
value);
}
break;
default:
DP(NETIF_MSG_LINK,
"bnx2x_override_led_value() unknown led index %d "
"(should be 0-5)\n", led_idx);
return -EINVAL;
}
return 0;
}
u8 bnx2x_set_led(struct link_params *params,
struct link_vars *vars, u8 mode, u32 speed)
{
......@@ -4099,9 +3989,9 @@ static u8 bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
return -EINVAL;
}
u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params, u16 addr,
u8 byte_cnt, u8 *o_buf)
static u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params, u16 addr,
u8 byte_cnt, u8 *o_buf)
{
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726)
return bnx2x_8726_read_sfp_module_eeprom(phy, params, addr,
......@@ -6819,13 +6709,6 @@ u8 bnx2x_phy_probe(struct link_params *params)
return 0;
}
u32 bnx2x_supported_attr(struct link_params *params, u8 phy_idx)
{
if (phy_idx < params->num_phys)
return params->phy[phy_idx].supported;
return 0;
}
static void set_phy_vars(struct link_params *params)
{
struct bnx2x *bp = params->bp;
......
drivers/net/bnx2x/bnx2x_link.h
View file @ 8d96286a
......@@ -279,12 +279,6 @@ u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr,
u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 val);
u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 *ret_val);
u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 val);
/* Reads the link_status from the shmem,
and update the link vars accordingly */
void bnx2x_link_status_update(struct link_params *input,
......@@ -304,8 +298,6 @@ u8 bnx2x_set_led(struct link_params *params, struct link_vars *vars,
#define LED_MODE_OPER 2
#define LED_MODE_FRONT_PANEL_OFF 3
u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, u32 led_idx, u32 value);
/* bnx2x_handle_module_detect_int should be called upon module detection
interrupt */
void bnx2x_handle_module_detect_int(struct link_params *params);
......@@ -325,19 +317,12 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
/* Reset the external of SFX7101 */
void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params, u16 addr,
u8 byte_cnt, u8 *o_buf);
void bnx2x_hw_reset_phy(struct link_params *params);
/* Checks if HW lock is required for this phy/board type */
u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base,
u32 shmem2_base);
/* Returns the aggregative supported attributes of the phys on board */
u32 bnx2x_supported_attr(struct link_params *params, u8 phy_idx);
/* Check swap bit and adjust PHY order */
u32 bnx2x_phy_selection(struct link_params *params);
......
drivers/net/bnx2x/bnx2x_main.c
View file @ 8d96286a
......@@ -403,7 +403,7 @@ static inline void storm_memset_hc_disable(struct bnx2x *bp, u8 port,
/* used only at init
* locking is done by mcp
*/
void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
{
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
......@@ -429,7 +429,8 @@ static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr)
#define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]"
#define DMAE_DP_DST_NONE "dst_addr [none]"
void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae, int msglvl)
static void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae,
int msglvl)
{
u32 src_type = dmae->opcode & DMAE_COMMAND_SRC;
......@@ -551,8 +552,9 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
return opcode;
}
void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
u8 src_type, u8 dst_type)
static void bnx2x_prep_dmae_with_comp(struct bnx2x *bp,
struct dmae_command *dmae,
u8 src_type, u8 dst_type)
{
memset(dmae, 0, sizeof(struct dmae_command));
......@@ -567,7 +569,8 @@ void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
}
/* issue a dmae command over the init-channel and wailt for completion */
int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae)
static int bnx2x_issue_dmae_with_comp(struct bnx2x *bp,
struct dmae_command *dmae)
{
u32 *wb_comp = bnx2x_sp(bp, wb_comp);
int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 40;
......@@ -674,8 +677,8 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
bnx2x_issue_dmae_with_comp(bp, &dmae);
}
void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
u32 addr, u32 len)
static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
u32 addr, u32 len)
{
int dmae_wr_max = DMAE_LEN32_WR_MAX(bp);
int offset = 0;
......@@ -1267,7 +1270,7 @@ static void bnx2x_igu_int_disable(struct bnx2x *bp)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
}
void bnx2x_int_disable(struct bnx2x *bp)
static void bnx2x_int_disable(struct bnx2x *bp)
{
if (bp->common.int_block == INT_BLOCK_HC)
bnx2x_hc_int_disable(bp);
......@@ -2236,7 +2239,7 @@ u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
}
/* must be called under rtnl_lock */
void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters)
static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters)
{
u32 mask = (1 << cl_id);
......@@ -2303,7 +2306,7 @@ void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters)
bp->mac_filters.unmatched_unicast & ~mask;
}
void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p)
static void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p)
{
struct tstorm_eth_function_common_config tcfg = {0};
u16 rss_flgs;
......@@ -2460,7 +2463,7 @@ static void bnx2x_pf_tx_cl_prep(struct bnx2x *bp,
txq_init->hc_rate = bp->tx_ticks ? (1000000 / bp->tx_ticks) : 0;
}
void bnx2x_pf_init(struct bnx2x *bp)
static void bnx2x_pf_init(struct bnx2x *bp)
{
struct bnx2x_func_init_params func_init = {0};
struct bnx2x_rss_params rss = {0};
......@@ -3928,7 +3931,7 @@ void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
hc_sm->time_to_expire = 0xFFFFFFFF;
}
void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
u8 vf_valid, int fw_sb_id, int igu_sb_id)
{
int igu_seg_id;
......@@ -6021,6 +6024,9 @@ int bnx2x_alloc_mem(struct bnx2x *bp)
/*
* Init service functions
*/
static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
int *state_p, int flags);
int bnx2x_func_start(struct bnx2x *bp)
{
bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_START, 0, 0, 0, 1);
......@@ -6030,7 +6036,7 @@ int bnx2x_func_start(struct bnx2x *bp)
WAIT_RAMROD_COMMON);
}
int bnx2x_func_stop(struct bnx2x *bp)
static int bnx2x_func_stop(struct bnx2x *bp)
{
bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_STOP, 0, 0, 0, 1);
......@@ -6103,8 +6109,8 @@ static void bnx2x_set_mac_addr_gen(struct bnx2x *bp, int set, u8 *mac,
bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, ramrod_flags);
}
int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
int *state_p, int flags)
static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
int *state_p, int flags)
{
/* can take a while if any port is running */
int cnt = 5000;
......@@ -6154,7 +6160,7 @@ int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
return -EBUSY;
}
u8 bnx2x_e1h_cam_offset(struct bnx2x *bp, u8 rel_offset)
static u8 bnx2x_e1h_cam_offset(struct bnx2x *bp, u8 rel_offset)
{
if (CHIP_IS_E1H(bp))
return E1H_FUNC_MAX * rel_offset + BP_FUNC(bp);
......@@ -6273,7 +6279,7 @@ static void bnx2x_invlidate_e1_mc_list(struct bnx2x *bp)
*
* @return 0 if cussess, -ENODEV if ramrod doesn't return.
*/
int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
{
u8 cam_offset = (CHIP_IS_E1(bp) ? ((BP_PORT(bp) ? 32 : 0) + 2) :
bnx2x_e1h_cam_offset(bp, CAM_ISCSI_ETH_LINE));
......@@ -6383,11 +6389,11 @@ static inline void bnx2x_set_ctx_validation(struct eth_context *cxt, u32 cid)
ETH_CONNECTION_TYPE);
}
int bnx2x_setup_fw_client(struct bnx2x *bp,
struct bnx2x_client_init_params *params,
u8 activate,
struct client_init_ramrod_data *data,
dma_addr_t data_mapping)
static int bnx2x_setup_fw_client(struct bnx2x *bp,
struct bnx2x_client_init_params *params,
u8 activate,
struct client_init_ramrod_data *data,
dma_addr_t data_mapping)
{
u16 hc_usec;
int ramrod = RAMROD_CMD_ID_ETH_CLIENT_SETUP;
......@@ -6633,7 +6639,8 @@ int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp,
return rc;
}
int bnx2x_stop_fw_client(struct bnx2x *bp, struct bnx2x_client_ramrod_params *p)
static int bnx2x_stop_fw_client(struct bnx2x *bp,
struct bnx2x_client_ramrod_params *p)
{
int rc;
......@@ -7440,7 +7447,7 @@ static void bnx2x_reset_task(struct work_struct *work)
* Init service functions
*/
u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
static u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
{
u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0;
u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7