Commit 8da313ad authored by Rob Herring's avatar Rob Herring Committed by Mark Brown

ASoC: dt-bindings: Convert dmic-codec to DT schema

Convert the dmic-codec binding to DT schema format.

The '#sound-dai-cells' and 'sound-name-prefix' properties were not
documented, but are in use, so add them.
Reviewed-by: default avatarArnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221021175721.4005601-1-robh@kernel.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent b700672e
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/dmic-codec.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Generic PDM Digital microphone (DMIC) codec
maintainers:
- Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
allOf:
- $ref: name-prefix.yaml#
properties:
compatible:
const: dmic-codec
'#sound-dai-cells':
const: 0
dmicen-gpios:
description: GPIO specifier for DMIC to control start and stop
maxItems: 1
num-channels:
description: Number of microphones on this DAI
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 8
default: 8
modeswitch-delay-ms:
description: Delay (in ms) to complete DMIC mode switch
wakeup-delay-ms:
description: Delay (in ms) after enabling the DMIC
required:
- compatible
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
dmic {
compatible = "dmic-codec";
dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
num-channels = <1>;
wakeup-delay-ms = <50>;
modeswitch-delay-ms = <35>;
};
...
Device-Tree bindings for Digital microphone (DMIC) codec
This device support generic PDM digital microphone.
Required properties:
- compatible: should be "dmic-codec".
Optional properties:
- dmicen-gpios: GPIO specifier for dmic to control start and stop
- num-channels: Number of microphones on this DAI
- wakeup-delay-ms: Delay (in ms) after enabling the DMIC
- modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch
Example node:
dmic_codec: dmic@0 {
compatible = "dmic-codec";
dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
num-channels = <1>;
wakeup-delay-ms <50>;
modeswitch-delay-ms <35>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment