ARM: dts: exynos: Convert to new i2c-gpio bindings

The updated "i2c-gpio" driver bindings require to define the SDA and SCL
GPIO lines in the separate properties and mark both as GPIO_OPEN_DRAIN.
Covert all Exynos dts files to follow this style.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm/boot/dts/exynos3250-monk.dts

@@ -57,7 +57,8 @@ vemmc_reg: voltage-regulator-0 {
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -52,7 +52,8 @@ power_key {
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 

arch/arm/boot/dts/exynos4210-i9100.dts

@@ -128,8 +128,8 @@ i2c_max17042_fuel: i2c-gpio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sda-gpios = <&gpy4 0 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&gpy4 1 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <5>;
 
 		battery@36 {

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -164,7 +164,8 @@ hdmi_en: voltage-regulator-hdmi-5v {
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi

@@ -53,7 +53,8 @@ ps_als_reg: voltage-regulator-8 {
 
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -68,7 +69,8 @@ ak8975@c {
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_HIGH>, <&gpf0 1 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/exynos4412-midas.dtsi

@@ -140,7 +140,8 @@ key-ok {
 
 	i2c_max77693: i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -188,7 +189,8 @@ charger {
 
 	i2c_max77693_fuel: i2c-gpio-3 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -228,7 +230,8 @@ touchkey@20 {
 
 	i2c-mhl {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -641,9 +641,8 @@ i2c_ddc: i2c-gpio {
 		pinctrl-0 = <&i2c2_gpio_bus>;
 		status = "okay";
 		compatible = "i2c-gpio";
-		gpios = <&gpa0 6 0 /* sda */
-			 &gpa0 7 0 /* scl */
-			>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;