Commit 8e033a93 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

mlxsw: pci: Wait after reset before accessing HW

After performing reset driver polls on HW indication until learning
that the reset is done, but immediately after reset the device becomes
unresponsive which might lead to completion timeout on the first read.

Wait for 100ms before starting the polling.

Fixes: 233fa44b ("mlxsw: pci: Implement reset done check")
Signed-off-by: default avatarYuval Mintz <yuvalm@mellanox.com>
Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fc233650
......@@ -1643,7 +1643,12 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,
return 0;
}
wmb(); /* reset needs to be written before we read control register */
/* Reset needs to be written before we read control register, and
* we must wait for the HW to become responsive once again
*/
wmb();
msleep(MLXSW_PCI_SW_RESET_WAIT_MSECS);
end = jiffies + msecs_to_jiffies(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS);
do {
u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY);
......
......@@ -59,6 +59,7 @@
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000
#define MLXSW_PCI_SW_RESET_WAIT_MSECS 100
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFFFF
#define MLXSW_PCI_FW_READY_MAGIC 0x5E
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment