[SCSI] fd_mcs: convert to accessors and !use_sg cleanup

 - convert to accessors and !use_sg cleanup
 - Not ready for sg-chaining
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/fd_mcs.c

@@ -1017,24 +1017,6 @@ static irqreturn_t fd_mcs_intr(int irq, void *dev_id)
 		printk(" ** IN DONE %d ** ", current_SC->SCp.have_data_in);
 #endif
 
-#if ERRORS_ONLY
-		if (current_SC->cmnd[0] == REQUEST_SENSE && !current_SC->SCp.Status) {
-			if ((unsigned char) (*((char *) current_SC->request_buffer + 2)) & 0x0f) {
-				unsigned char key;
-				unsigned char code;
-				unsigned char qualifier;
-
-				key = (unsigned char) (*((char *) current_SC->request_buffer + 2)) & 0x0f;
-				code = (unsigned char) (*((char *) current_SC->request_buffer + 12));
-				qualifier = (unsigned char) (*((char *) current_SC->request_buffer + 13));
-
-				if (key != UNIT_ATTENTION && !(key == NOT_READY && code == 0x04 && (!qualifier || qualifier == 0x02 || qualifier == 0x01))
-				    && !(key == ILLEGAL_REQUEST && (code == 0x25 || code == 0x24 || !code)))
-
-					printk("fd_mcs: REQUEST SENSE " "Key = %x, Code = %x, Qualifier = %x\n", key, code, qualifier);
-			}
-		}
-#endif
 #if EVERY_ACCESS
 		printk("BEFORE MY_DONE. . .");
 #endif
@@ -1097,7 +1079,9 @@ static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 		panic("fd_mcs: fd_mcs_queue() NOT REENTRANT!\n");
 	}
 #if EVERY_ACCESS
-	printk("queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n", SCpnt->target, *(unsigned char *) SCpnt->cmnd, SCpnt->use_sg, SCpnt->request_bufflen);
+	printk("queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n",
+		SCpnt->target, *(unsigned char *) SCpnt->cmnd,
+		scsi_sg_count(SCpnt), scsi_bufflen(SCpnt));
 #endif
 
 	fd_mcs_make_bus_idle(shpnt);
@@ -1107,14 +1091,14 @@ static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 
 	/* Initialize static data */
 
-	if (current_SC->use_sg) {
-		current_SC->SCp.buffer = (struct scatterlist *) current_SC->request_buffer;
+	if (scsi_bufflen(current_SC)) {
+		current_SC->SCp.buffer = scsi_sglist(current_SC);
 		current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
 		current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
-		current_SC->SCp.buffers_residual = current_SC->use_sg - 1;
+		current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1;
 	} else {
-		current_SC->SCp.ptr = (char *) current_SC->request_buffer;
-		current_SC->SCp.this_residual = current_SC->request_bufflen;
+		current_SC->SCp.ptr = NULL;
+		current_SC->SCp.this_residual = 0;
 		current_SC->SCp.buffer = NULL;
 		current_SC->SCp.buffers_residual = 0;
 	}
@@ -1166,7 +1150,9 @@ static void fd_mcs_print_info(Scsi_Cmnd * SCpnt)
 		break;
 	}
 
-	printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd, SCpnt->use_sg, SCpnt->request_bufflen);
+	printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n",
+		SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd,
+		scsi_sg_count(SCpnt), scsi_bufflen(SCpnt));
 	printk("sent_command = %d, have_data_in = %d, timeout = %d\n", SCpnt->SCp.sent_command, SCpnt->SCp.have_data_in, SCpnt->timeout);
 #if DEBUG_RACE
 	printk("in_interrupt_flag = %d\n", in_interrupt_flag);