Merge tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO tree bulk changes from Linus Walleij:
 "A big set this merge window, as we have much going on in this
  subsystem.  The changes to other subsystems (notably a slew of ARM
  machines as I am doing away with their custom APIs) have all been
  ACKed to the extent possible.

  Major changes this time:

   - Some core improvements and cleanups to the new GPIO descriptor API.
     This seems to be working now so we can start the exodus to this
     API, moving gradually away from the global GPIO numberspace.

   - Incremental improvements to the ACPI GPIO core, and move the few
     GPIO ACPI clients we have to the GPIO descriptor API right *now*
     before we go any further.  We actually managed to contain this
     *before* we started to litter the kernel with yet another hackish
     global numberspace for the ACPI GPIOs, which is a big win.

   - The RFkill GPIO driver and all platforms using it have been
     migrated to use the GPIO descriptors rather than fixed number
     assignments.  Tegra machine has been migrated as part of this.

   - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.  Those
     should be really good examples of how I expect a nice GPIO driver
     to look these days.

   - Do away with custom GPIO implementations on a major part of the ARM
     machines: ks8695, lpc32xx, mv78xx0.  Make a first step towards the
     same in the horribly convoluted Samsung S3C include forest.  We
     expect to continue to clean this up as we move forward.

   - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and
     lynxpoint.

     This makes the GPIOlib core aware that a certain GPIO line is used
     for IRQs and can then enforce some semantics such as disallowing a
     GPIO line marked as in use for IRQ to be switched to output mode.

   - Drop all use of irq_set_chip_and_handler_name().  The name provided
     in these cases were just unhelpful tags like "mux" or "demux".

   - Extend the MCP23s08 driver to handle interrupts.

   - Minor incremental improvements for rcar, lynxpoint, em 74x164 and
     msm drivers.

   - Some non-urgent bug fixes here and there, duplicate #includes and
     that usual kind of cleanups"

Fix up broken Kconfig file manually to make this all compile.

* tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: mcp23s08: fix casting caused build warning
  gpio: mcp23s08: depend on OF_GPIO
  gpio: mcp23s08: Add irq functionality for i2c chips
  ARM: S5P[v210|c100|64x0]: Fix build error
  gpio: pxa: clamp gpio get value to [0,1]
  ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
  ARM: S3C[24|64]xx: move includes back under <mach/> scope
  Documentation / ACPI: update to GPIO descriptor API
  gpio / ACPI: get rid of acpi_gpio.h
  gpio / ACPI: register to ACPI events automatically
  mmc: sdhci-acpi: convert to use GPIO descriptor API
  ARM: s3c24xx: fix build error
  gpio: f7188x: set can_sleep attribute
  gpio: samsung: Update documentation
  gpio: samsung: Remove hardware.h inclusion
  gpio: xtensa: depend on HAVE_XTENSA_GPIO32
  gpio: clps711x: Enable driver compilation with COMPILE_TEST
  gpio: clps711x: Use of_match_ptr()
  net: rfkill: gpio: convert to descriptor-based GPIO interface
  leds: s3c24xx: Fix build failure
  ...

Documentation/acpi/enumeration.txt

@@ -293,36 +293,13 @@ the device to the driver. For example:
 
 These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
 specifies the path to the controller. In order to use these GPIOs in Linux
-we need to translate them to the Linux GPIO numbers.
+we need to translate them to the corresponding Linux GPIO descriptors.
 
-In a simple case of just getting the Linux GPIO number from device
-resources one can use acpi_get_gpio_by_index() helper function. It takes
-pointer to the device and index of the GpioIo/GpioInt descriptor in the
-device resources list. For example:
+There is a standard GPIO API for that and is documented in
+Documentation/gpio.txt.
 
-	int gpio_irq, gpio_power;
-	int ret;
-
-	gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL);
-	if (gpio_irq < 0)
-		/* handle error */
-
-	gpio_power = acpi_get_gpio_by_index(dev, 0, NULL);
-	if (gpio_power < 0)
-		/* handle error */
-
-	/* Now we can use the GPIO numbers */
-
-Other GpioIo parameters must be converted first by the driver to be
-suitable to the gpiolib before passing them.
-
-In case of GpioInt resource an additional call to gpio_to_irq() must be
-done before calling request_irq().
-
-Note that the above API is ACPI specific and not recommended for drivers
-that need to support non-ACPI systems. The recommended way is to use
-the descriptor based GPIO interfaces. The above example looks like this
-when converted to the GPIO desc:
+In the above example we can get the corresponding two GPIO descriptors with
+a code like this:
 
 	#include <linux/gpio/consumer.h>
 	...
@@ -339,4 +316,5 @@ when converted to the GPIO desc:
 
 	/* Now we can use the GPIO descriptors */
 
-See also Documentation/gpio.txt.
+There are also devm_* versions of these functions which release the
+descriptors once the device is released.

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -85,21 +85,10 @@ between the calls.
 Headers
 -------
 
-  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
+  See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
   is included by using #include <mach/regs-gpio.h>
 
-  The GPIO management functions are defined in the hardware
-  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
-  included by #include <mach/hardware.h>
-
-  A useful amount of documentation can be found in the hardware
-  header on how the GPIO functions (and others) work.
-
-  Whilst a number of these functions do make some checks on what
-  is passed to them, for speed of use, they may not always ensure
-  that the user supplied data to them is correct.
-
 
 PIN Numbers
 -----------

Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt

@@ -38,12 +38,38 @@ Required device specific properties (only for SPI chips):
     removed.
 - spi-max-frequency = The maximum frequency this chip is able to handle
 
-Example I2C:
+Optional properties:
+- #interrupt-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as a interrupt controller.
+NOTE: The interrupt functionality is only supported for i2c versions of the
+chips. The spi chips can also do the interrupts, but this is not supported by
+the linux driver yet.
+
+Optional device specific properties:
+- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
+        with two interrupt outputs (these are the devices ending with 17 and
+        those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+        IO 8-15 are bank 2. These chips have two different interrupt outputs:
+        One for bank 1 and another for bank 2. If irq-mirror is set, both
+        interrupts are generated regardless of the bank that an input change
+        occured on. If it is not set, the interrupt are only generated for the
+        bank they belong to.
+        On devices with only one interrupt output this property is useless.
+
+Example I2C (with interrupt):
 gpiom1: gpio@20 {
         compatible = "microchip,mcp23017";
         gpio-controller;
         #gpio-cells = <2>;
         reg = <0x20>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells=<2>;
+        microchip,irq-mirror;
 };
 
 Example SPI:

Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt

+MOXA ART GPIO Controller
+
+Required properties:
+
+- #gpio-cells : Should be 2, The first cell is the pin number,
+		the second cell is used to specify polarity:
+			0 = active high
+			1 = active low
+- compatible : Must be "moxa,moxart-gpio"
+- reg : Should contain registers location and length
+
+Example:
+
+	gpio: gpio@98700000 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		compatible = "moxa,moxart-gpio";
+		reg =	<0x98700000 0xC>;
+	};

Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt

@@ -2,10 +2,11 @@
 
 Required Properties:
 
-  - compatible: should be one of the following.
+  - compatible: should contain one of the following.
     - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
     - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
     - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
+    - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller.
     - "renesas,gpio-rcar": for generic R-Car GPIO controller.
 
   - reg: Base address and length of each memory resource used by the GPIO

Documentation/gpio/board.txt

@@ -72,10 +72,11 @@ where
 
   - chip_label is the label of the gpiod_chip instance providing the GPIO
   - chip_hwnum is the hardware number of the GPIO within the chip
-  - dev_id is the identifier of the device that will make use of this GPIO. If
-	NULL, the GPIO will be available to all devices.
+  - dev_id is the identifier of the device that will make use of this GPIO. It
+	can be NULL, in which case it will be matched for calls to gpiod_get()
+	with a NULL device.
   - con_id is the name of the GPIO function from the device point of view. It
-	can be NULL.
+	can be NULL, in which case it will match any function.
   - idx is the index of the GPIO within the function.
   - flags is defined to specify the following properties:
 	* GPIOF_ACTIVE_LOW	- to configure the GPIO as active-low
@@ -86,18 +87,23 @@ In the future, these flags might be extended to support more properties.
 
 Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
 
-A lookup table can then be defined as follows:
+A lookup table can then be defined as follows, with an empty entry defining its
+end:
 
-	struct gpiod_lookup gpios_table[] = {
-	GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
-	GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
-	GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
-	GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
-	};
+struct gpiod_lookup_table gpios_table = {
+	.dev_id = "foo.0",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio.0", 15, "led", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio.0", 16, "led", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio.0", 17, "led", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio.0", 1, "power", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
 
 And the table can be added by the board code as follows:
 
-	gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+	gpiod_add_lookup_table(&gpios_table);
 
 The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 

Documentation/gpio/consumer.txt

@@ -38,7 +38,11 @@ device that displays digits), an additional index argument can be specified:
 					  const char *con_id, unsigned int idx)
 
 Both functions return either a valid GPIO descriptor, or an error code checkable
-with IS_ERR(). They will never return a NULL pointer.
+with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
+if and only if no GPIO has been assigned to the device/function/index triplet,
+other error codes are used for cases where a GPIO has been assigned but an error
+occured while trying to acquire it. This is useful to discriminate between mere
+errors and an absence of GPIO for optional GPIO parameters.
 
 Device-managed variants of these functions are also defined:
 

arch/arm/Kconfig

@@ -711,7 +711,6 @@ config ARCH_S3C24XX
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	select SAMSUNG_ATAGS
 	help
@@ -734,7 +733,6 @@ config ARCH_S3C64XX
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select NEED_MACH_GPIO_H
 	select NO_IOPORT
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS
@@ -1594,7 +1592,7 @@ config ARM_PSCI
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI

arch/arm/mach-ks8695/include/mach/gpio.h

-/*
- * arch/arm/mach-ks8695/include/mach/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-/*
- * Map IRQ number to GPIO line.
- */
-extern int irq_to_gpio(unsigned int irq);
-
-#endif

arch/arm/mach-lpc32xx/include/mach/gpio.h

-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include "gpio-lpc32xx.h"
-
-#endif /* __MACH_GPIO_H */

arch/arm/mach-lpc32xx/phy3250.c

@@ -36,6 +36,7 @@
 #include <linux/clk.h>
 #include <linux/mtd/lpc32xx_slc.h>
 #include <linux/mtd/lpc32xx_mlc.h>
+#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -44,7 +45,6 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include <mach/board.h>
-#include <mach/gpio-lpc32xx.h>
 #include "common.h"
 
 /*

arch/arm/mach-mv78xx0/include/mach/gpio.h

-/*
- * arch/asm-arm/mach-mv78xx0/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>

arch/arm/mach-s3c24xx/Kconfig

@@ -180,27 +180,6 @@ config CPU_LLSERIAL_S3C2440
 	  Selected if there is an S3C2440 (or register compatible) serial
 	  low-level implementation needed
 
-# gpio configurations
-
-config S3C24XX_GPIO_EXTRA
-	int
-	default 128 if S3C24XX_GPIO_EXTRA128
-	default 64 if S3C24XX_GPIO_EXTRA64
-	default 16 if ARCH_H1940
-	default 0
-
-config S3C24XX_GPIO_EXTRA64
-	bool
-	help
-	  Add an extra 64 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
-config S3C24XX_GPIO_EXTRA128
-	bool
-	help
-	  Add an extra 128 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 	depends on ARM_S3C24XX_CPUFREQ

arch/arm/mach-s3c24xx/common-smdk.c

@@ -37,8 +37,8 @@
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c24xx/h1940-bluetooth.c

@@ -19,8 +19,10 @@
 #include <linux/gpio.h>
 #include <linux/rfkill.h>
 
+#include <plat/gpio-cfg.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include "h1940.h"
 

arch/arm/mach-s3c24xx/include/mach/gpio.h → arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h

@@ -14,16 +14,8 @@
  * devices that need GPIO.
  */
 
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H __FILE__
-
-#ifdef CONFIG_CPU_S3C244X
-#define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
-#else
-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
-#endif
+#ifndef GPIO_SAMSUNG_S3C24XX_H
+#define GPIO_SAMSUNG_S3C24XX_H
 
 /*
  * GPIO sizes for various SoCs:
@@ -31,17 +23,17 @@
  *   2410 2412 2440 2443 2416
  *             2442
  *   ---- ---- ---- ---- ----
- * A  23   22   25   16   25
- * B  11   11   11   11   9
- * C  16   15   16   16   16
+ * A  23   22   25   16   27
+ * B  11   11   11   11   11
+ * C  16   16   16   16   16
  * D  16   16   16   16   16
  * E  16   16   16   16   16
  * F  8    8    8    8    8
  * G  16   16   16   16   8
- * H  11   11   9    15   15
+ * H  11   11   11   15   15
  * J  --   --   13   16   --
  * K  --   --   --   --   16
- * L  --   --   --   15   7
+ * L  --   --   --   15   14
  * M  --   --   --   2    2
  */
 
@@ -101,8 +93,6 @@ enum s3c_gpio_number {
 #define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
 #define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
 
-#include <plat/gpio-cfg.h>
-
 #ifdef CONFIG_CPU_S3C244X
 #define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
 #elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
@@ -111,4 +101,4 @@ enum s3c_gpio_number {
 #define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
 #endif
 
-#endif /* __MACH_GPIO_H */
+#endif /* GPIO_SAMSUNG_S3C24XX_H */

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -52,6 +52,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -35,6 +35,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -36,6 +36,7 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 

arch/arm/mach-s3c24xx/mach-bast.c

@@ -48,6 +48,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -75,6 +75,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -54,6 +54,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-jive.c

@@ -38,6 +38,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/fb.h>
+#include <mach/gpio-samsung.h>
 
 #include <asm/mach-types.h>
 

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -42,6 +42,7 @@
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/mmc-s3cmci.h>

arch/arm/mach-s3c24xx/mach-n30.c

@@ -36,6 +36,7 @@
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -37,6 +37,7 @@
 
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 

arch/arm/mach-s3c24xx/mach-osiris-dvs.c

@@ -20,6 +20,7 @@
 #include <linux/i2c/tps65010.h>
 
 #include <plat/cpu-freq.h>
+#include <mach/gpio-samsung.h>
 
 #define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
 

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -50,6 +50,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include "common.h"
 #include "osiris.h"

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -54,6 +54,7 @@
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -51,6 +51,7 @@
 #include <mach/fb.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -58,6 +59,7 @@
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
+#include <plat/gpio-cfg.h>
 
 #include "common.h"
 #include "h1940.h"

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -43,6 +43,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -39,6 +39,7 @@
 
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 #include <mach/fb.h>
 
 #include <plat/clock.h>

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -38,6 +38,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/gpio-samsung.h>
 
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <linux/platform_data/i2c-s3c2410.h>

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -40,6 +40,7 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/pm-s3c2410.c

@@ -33,7 +33,9 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 

arch/arm/mach-s3c24xx/pm.c

@@ -39,6 +39,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
+#include <mach/gpio-samsung.h>
 
 #include <asm/mach/time.h>
 

arch/arm/mach-s3c24xx/s3c2410.c

@@ -30,6 +30,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 

arch/arm/mach-s3c24xx/s3c2416.c

@@ -42,6 +42,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>

arch/arm/mach-s3c24xx/s3c2440.c

@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/s3c2442.c

@@ -37,6 +37,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <linux/atomic.h>
 #include <asm/irq.h>
 

arch/arm/mach-s3c24xx/s3c2443.c

@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 

arch/arm/mach-s3c24xx/setup-i2c.c

@@ -19,6 +19,7 @@ struct platform_device;
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {

arch/arm/mach-s3c24xx/setup-sdhci-gpio.c

@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
 void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

arch/arm/mach-s3c24xx/setup-ts.c

@@ -15,7 +15,9 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <plat/gpio-cfg.h>
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 
 /**
  * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems

arch/arm/mach-s3c24xx/simtec-usb.c

@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 
 #include <linux/platform_data/usb-ohci-s3c2410.h>

arch/arm/mach-s3c64xx/Kconfig

@@ -192,7 +192,6 @@ config SMDK6410_WM1190_EV1
 	select MFD_WM8350_I2C
 	select REGULATOR
 	select REGULATOR_WM8350
-	select SAMSUNG_GPIO_EXTRA64
 	help
 	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
 	  and audio daughtercard for the Samsung SMDK6410 reference
@@ -208,7 +207,6 @@ config SMDK6410_WM1192_EV1
 	select MFD_WM831X_I2C
 	select REGULATOR
 	select REGULATOR_WM831X
-	select SAMSUNG_GPIO_EXTRA64
 	help
 	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 	  daughtercard for the Samsung SMDK6410 reference platform.
@@ -294,7 +292,6 @@ config MACH_WLF_CRAGG_6410
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select SAMSUNG_GPIO_EXTRA128
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
 

arch/arm/mach-s3c64xx/common.c

@@ -41,6 +41,7 @@
 #include <mach/map.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c64xx/crag6410.h

@@ -11,7 +11,7 @@
 #ifndef MACH_CRAG6410_H
 #define MACH_CRAG6410_H
 
-#include <linux/gpio.h>
+#include <mach/gpio-samsung.h>
 
 #define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
 

arch/arm/mach-s3c64xx/dev-audio.c

@@ -22,6 +22,7 @@
 #include <plat/devs.h>
 #include <linux/platform_data/asoc-s3c.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 {

arch/arm/mach-s3c64xx/include/mach/gpio.h → arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h

-/* arch/arm/mach-s3c6400/include/mach/gpio.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -12,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef GPIO_SAMSUNG_S3C64XX_H
+#define GPIO_SAMSUNG_S3C64XX_H
+
 /* GPIO bank sizes */
 #define S3C64XX_GPIO_A_NR	(8)
 #define S3C64XX_GPIO_B_NR	(7)
@@ -88,6 +90,5 @@ enum s3c_gpio_number {
 /* define the number of gpios we need to the one after the GPQ() range */
 #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
 
-#define BOARD_NR_GPIOS	(16 + CONFIG_SAMSUNG_GPIO_EXTRA)
+#endif /* GPIO_SAMSUNG_S3C64XX_H */
 
-#define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -48,8 +48,8 @@
 #include <video/samsung_fimd.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
-
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/regs-serial.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -35,6 +35,7 @@
 
 #include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -30,6 +30,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -31,6 +31,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -25,6 +25,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smartq5.c

@@ -23,6 +23,7 @@
 #include <video/samsung_fimd.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c64xx/mach-smartq7.c

@@ -23,6 +23,7 @@
 #include <video/samsung_fimd.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c64xx/mach-smdk6400.c

@@ -35,6 +35,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -57,6 +57,7 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/pm.c

@@ -28,6 +28,7 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
+#include <mach/gpio-samsung.h>
 
 #include "regs-gpio-memport.h"
 #include "regs-modem.h"

arch/arm/mach-s3c64xx/setup-fb-24bpp.c

@@ -19,6 +19,7 @@
 
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 void s3c64xx_fb_gpio_setup_24bpp(void)
 {

arch/arm/mach-s3c64xx/setup-i2c0.c

@@ -20,6 +20,7 @@ struct platform_device; /* don't need the contents */
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {

arch/arm/mach-s3c64xx/setup-i2c1.c

@@ -20,6 +20,7 @@ struct platform_device; /* don't need the contents */
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {

arch/arm/mach-s3c64xx/setup-ide.c

@@ -17,6 +17,7 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 
 void s3c64xx_ide_setup_gpio(void)

arch/arm/mach-s3c64xx/setup-keypad.c

@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
 #include <plat/keypad.h>
+#include <mach/gpio-samsung.h>
 
 void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 {

arch/arm/mach-s3c64xx/setup-sdhci-gpio.c

@@ -20,6 +20,7 @@
 
 #include <plat/gpio-cfg.h>
 #include <plat/sdhci.h>
+#include <mach/gpio-samsung.h>
 
 void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {

arch/arm/mach-s3c64xx/setup-spi.c

@@ -10,6 +10,7 @@
 
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 int s3c64xx_spi0_cfg_gpio(void)

arch/arm/mach-tegra/board-paz00.c

@@ -18,6 +18,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
 #include <linux/rfkill-gpio.h>
 #include "board.h"
 
@@ -36,7 +37,17 @@ static struct platform_device wifi_rfkill_device = {
 	},
 };
 
+static struct gpiod_lookup_table wifi_gpio_lookup = {
+	.dev_id = "rfkill_gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0),
+		GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0),
+		{ },
+	},
+};
+
 void __init tegra_paz00_wifikill_init(void)
 {
+	gpiod_add_lookup_table(&wifi_gpio_lookup);
 	platform_device_register(&wifi_rfkill_device);
 }

arch/arm/plat-samsung/pm-gpio.c

@@ -19,6 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
+#include <mach/gpio-samsung.h>
+#endif
+
 #include <plat/gpio-core.h>
 #include <plat/pm.h>
 

arch/arm/plat-samsung/setup-camif.c

@@ -10,6 +10,7 @@
 
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
 
 /* Number of camera port pins, without FIELD */
 #define S3C_CAMIF_NUM_GPIOS	13

arch/xtensa/Kconfig

@@ -64,6 +64,9 @@ config MMU
 config VARIANT_IRQ_SWITCH
 	def_bool n
 
+config HAVE_XTENSA_GPIO32
+	def_bool n
+
 menu "Processor type and features"
 
 choice
@@ -73,16 +76,19 @@ choice
 config XTENSA_VARIANT_FSF
 	bool "fsf - default (not generic) configuration"
 	select MMU
+	select HAVE_XTENSA_GPIO32
 
 config XTENSA_VARIANT_DC232B
 	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
 	select MMU
+	select HAVE_XTENSA_GPIO32
 	help
 	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
 
 config XTENSA_VARIANT_DC233C
 	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
 	select MMU
+	select HAVE_XTENSA_GPIO32
 	help
 	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).
 

drivers/gpio/Kconfig

@@ -110,7 +110,7 @@ comment "Memory mapped GPIO drivers:"
 
 config GPIO_CLPS711X
 	tristate "CLPS711X GPIO support"
-	depends on ARCH_CLPS711X
+	depends on ARCH_CLPS711X || COMPILE_TEST
 	select GPIO_GENERIC
 	help
 	  Say yes here to support GPIO on CLPS711X SoCs.
@@ -156,6 +156,13 @@ config GPIO_F7188X
 	  To compile this driver as a module, choose M here: the module will
 	  be called f7188x-gpio.
 
+config GPIO_MOXART
+	bool "MOXART GPIO support"
+	depends on ARCH_MOXART
+	help
+	  Select this option to enable GPIO driver for
+	  MOXA ART SoC devices.
+
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
@@ -237,6 +244,15 @@ config GPIO_SAMSUNG
 	  Legacy GPIO support. Use only for platforms without support for
 	  pinctrl.
 
+config GPIO_SCH311X
+	tristate "SMSC SCH311x SuperI/O GPIO"
+	help
+	  Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
+	  SCH3116 "Super I/O" chipsets.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-sch311x.
+
 config GPIO_SPEAR_SPICS
 	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
 	depends on PLAT_SPEAR
@@ -281,6 +297,15 @@ config GPIO_XILINX
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
+config GPIO_XTENSA
+	bool "Xtensa GPIO32 support"
+	depends on XTENSA
+	depends on HAVE_XTENSA_GPIO32
+	depends on !SMP
+	help
+	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
+	  and EXPSTATE (output) ports
+
 config GPIO_VR41XX
 	tristate "NEC VR4100 series General-purpose I/O Uint support"
 	depends on CPU_VR41XX
@@ -353,7 +378,7 @@ config GPIO_GE_FPGA
 	  board computers.
 
 config GPIO_LYNXPOINT
-	bool "Intel Lynxpoint GPIO support"
+	tristate "Intel Lynxpoint GPIO support"
 	depends on ACPI && X86
 	select IRQ_DOMAIN
 	help
@@ -692,11 +717,13 @@ config GPIO_MAX7301
 
 config GPIO_MCP23S08
 	tristate "Microchip MCP23xxx I/O expander"
+	depends on OF_GPIO
 	depends on (SPI_MASTER && !I2C) || I2C
 	help
 	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
 	  I/O expanders.
 	  This provides a GPIO interface supporting inputs and outputs.
+	  The I2C versions of the chips can be used as interrupt-controller.
 
 config GPIO_MC33880
 	tristate "Freescale MC33880 high-side/low-side switch"
@@ -707,10 +734,10 @@ config GPIO_MC33880
 
 config GPIO_74X164
 	tristate "74x164 serial-in/parallel-out 8-bits shift register"
-	depends on SPI_MASTER
+	depends on SPI_MASTER && OF
 	help
-	  Platform driver for 74x164 compatible serial-in/parallel-out
-	  8-outputs shift registers. This driver can be used to provide access
+	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+	  shift registers. This driver can be used to provide access
 	  to more gpio outputs.
 
 comment "AC97 GPIO expanders:"

drivers/gpio/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
+obj-$(CONFIG_GPIO_MOXART)	+= gpio-moxart.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
@@ -67,6 +68,7 @@ obj-$(CONFIG_GPIO_RCAR)		+= gpio-rcar.o
 obj-$(CONFIG_GPIO_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
+obj-$(CONFIG_GPIO_SCH311X)	+= gpio-sch311x.o
 obj-$(CONFIG_GPIO_SODAVILLE)	+= gpio-sodaville.o
 obj-$(CONFIG_GPIO_SPEAR_SPICS)	+= gpio-spear-spics.o
 obj-$(CONFIG_GPIO_STA2X11)	+= gpio-sta2x11.o
@@ -95,3 +97,4 @@ obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
 obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
 obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
+obj-$(CONFIG_GPIO_XTENSA)	+= gpio-xtensa.o

drivers/gpio/gpio-74x164.c

@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/74x164.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
@@ -21,7 +20,6 @@
 #define GEN_74X164_NUMBER_GPIOS	8
 
 struct gen_74x164_chip {
-	struct spi_device	*spi;
 	u8			*buffer;
 	struct gpio_chip	gpio_chip;
 	struct mutex		lock;
@@ -35,6 +33,7 @@ static struct gen_74x164_chip *gpio_to_74x164_chip(struct gpio_chip *gc)
 
 static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
 {
+	struct spi_device *spi = to_spi_device(chip->gpio_chip.dev);
 	struct spi_message message;
 	struct spi_transfer *msg_buf;
 	int i, ret = 0;
@@ -55,12 +54,12 @@ static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
 	 * byte of the buffer will end up in the last register.
 	 */
 	for (i = chip->registers - 1; i >= 0; i--) {
-		msg_buf[i].tx_buf = chip->buffer +i;
+		msg_buf[i].tx_buf = chip->buffer + i;
 		msg_buf[i].len = sizeof(u8);
 		spi_message_add_tail(msg_buf + i, &message);
 	}
 
-	ret = spi_sync(chip->spi, &message);
+	ret = spi_sync(spi, &message);
 
 	kfree(msg_buf);
 
@@ -108,14 +107,8 @@ static int gen_74x164_direction_output(struct gpio_chip *gc,
 static int gen_74x164_probe(struct spi_device *spi)
 {
 	struct gen_74x164_chip *chip;
-	struct gen_74x164_chip_platform_data *pdata;
 	int ret;
 
-	if (!spi->dev.of_node) {
-		dev_err(&spi->dev, "No device tree data available.\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * bits_per_word cannot be configured in platform data
 	 */
@@ -129,40 +122,32 @@ static int gen_74x164_probe(struct spi_device *spi)
 	if (!chip)
 		return -ENOMEM;
 
-	pdata = dev_get_platdata(&spi->dev);
-	if (pdata && pdata->base)
-		chip->gpio_chip.base = pdata->base;
-	else
-		chip->gpio_chip.base = -1;
-
-	mutex_init(&chip->lock);
-
 	spi_set_drvdata(spi, chip);
 
-	chip->spi = spi;
-
 	chip->gpio_chip.label = spi->modalias;
 	chip->gpio_chip.direction_output = gen_74x164_direction_output;
 	chip->gpio_chip.get = gen_74x164_get_value;
 	chip->gpio_chip.set = gen_74x164_set_value;
+	chip->gpio_chip.base = -1;
 
-	if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) {
-		dev_err(&spi->dev, "Missing registers-number property in the DT.\n");
-		ret = -EINVAL;
-		goto exit_destroy;
+	if (of_property_read_u32(spi->dev.of_node, "registers-number",
+				 &chip->registers)) {
+		dev_err(&spi->dev,
+			"Missing registers-number property in the DT.\n");
+		return -EINVAL;
 	}
 
 	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
 	chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
-	if (!chip->buffer) {
-		ret = -ENOMEM;
-		goto exit_destroy;
-	}
+	if (!chip->buffer)
+		return -ENOMEM;
 
-	chip->gpio_chip.can_sleep = 1;
+	chip->gpio_chip.can_sleep = true;
 	chip->gpio_chip.dev = &spi->dev;
 	chip->gpio_chip.owner = THIS_MODULE;
 
+	mutex_init(&chip->lock);
+
 	ret = __gen_74x164_write_config(chip);
 	if (ret) {
 		dev_err(&spi->dev, "Failed writing: %d\n", ret);
@@ -170,31 +155,23 @@ static int gen_74x164_probe(struct spi_device *spi)
 	}
 
 	ret = gpiochip_add(&chip->gpio_chip);
-	if (ret)
-		goto exit_destroy;
-
-	return ret;
+	if (!ret)
+		return 0;
 
 exit_destroy:
 	mutex_destroy(&chip->lock);
+
 	return ret;
 }
 
 static int gen_74x164_remove(struct spi_device *spi)
 {
-	struct gen_74x164_chip *chip;
+	struct gen_74x164_chip *chip = spi_get_drvdata(spi);
 	int ret;
 
-	chip = spi_get_drvdata(spi);
-	if (chip == NULL)
-		return -ENODEV;
-
 	ret = gpiochip_remove(&chip->gpio_chip);
 	if (!ret)
 		mutex_destroy(&chip->lock);
-	else
-		dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
-				ret);
 
 	return ret;
 }

drivers/gpio/gpio-adnp.c

@@ -260,7 +260,7 @@ static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios)
 	chip->direction_output = adnp_gpio_direction_output;
 	chip->get = adnp_gpio_get;
 	chip->set = adnp_gpio_set;
-	chip->can_sleep = 1;
+	chip->can_sleep = true;
 
 	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		chip->dbg_show = adnp_gpio_dbg_show;
@@ -408,6 +408,27 @@ static void adnp_irq_bus_unlock(struct irq_data *data)
 	mutex_unlock(&adnp->irq_lock);
 }
 
+static unsigned int adnp_irq_startup(struct irq_data *data)
+{
+	struct adnp *adnp = irq_data_get_irq_chip_data(data);
+
+	if (gpio_lock_as_irq(&adnp->gpio, data->hwirq))
+		dev_err(adnp->gpio.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			data->hwirq);
+	/* Satisfy the .enable semantics by unmasking the line */
+	adnp_irq_unmask(data);
+	return 0;
+}
+
+static void adnp_irq_shutdown(struct irq_data *data)
+{
+	struct adnp *adnp = irq_data_get_irq_chip_data(data);
+
+	adnp_irq_mask(data);
+	gpio_unlock_as_irq(&adnp->gpio, data->hwirq);
+}
+
 static struct irq_chip adnp_irq_chip = {
 	.name = "gpio-adnp",
 	.irq_mask = adnp_irq_mask,
@@ -415,6 +436,8 @@ static struct irq_chip adnp_irq_chip = {
 	.irq_set_type = adnp_irq_set_type,
 	.irq_bus_lock = adnp_irq_bus_lock,
 	.irq_bus_sync_unlock = adnp_irq_bus_unlock,
+	.irq_startup = adnp_irq_startup,
+	.irq_shutdown = adnp_irq_shutdown,
 };
 
 static int adnp_irq_map(struct irq_domain *domain, unsigned int irq,

drivers/gpio/gpio-adp5520.c

@@ -127,7 +127,7 @@ static int adp5520_gpio_probe(struct platform_device *pdev)
 	gc->direction_output = adp5520_gpio_direction_output;
 	gc->get = adp5520_gpio_get_value;
 	gc->set = adp5520_gpio_set_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = pdata->gpio_start;
 	gc->ngpio = gpios;

drivers/gpio/gpio-adp5588.c

@@ -380,7 +380,7 @@ static int adp5588_gpio_probe(struct i2c_client *client,
 	gc->direction_output = adp5588_gpio_direction_output;
 	gc->get = adp5588_gpio_get_value;
 	gc->set = adp5588_gpio_set_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = pdata->gpio_start;
 	gc->ngpio = ADP5588_MAXGPIO;

drivers/gpio/gpio-amd8111.c

@@ -60,7 +60,7 @@
  * register a pci_driver, because someone else might one day
  * want to register another driver on the same PCI id.
  */
-static DEFINE_PCI_DEVICE_TABLE(pci_tbl) = {
+static const struct pci_device_id pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 },
 	{ 0, },	/* terminate list */
 };

drivers/gpio/gpio-arizona.c

@@ -91,7 +91,7 @@ static struct gpio_chip template_chip = {
 	.get			= arizona_gpio_get,
 	.direction_output	= arizona_gpio_direction_out,
 	.set			= arizona_gpio_set,
-	.can_sleep		= 1,
+	.can_sleep		= true,
 };
 
 static int arizona_gpio_probe(struct platform_device *pdev)

drivers/gpio/gpio-bcm-kona.c

@@ -449,12 +449,34 @@ static void bcm_kona_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
+static unsigned int bcm_kona_gpio_irq_startup(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq))
+		dev_err(kona_gpio->gpio_chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			d->hwirq);
+	bcm_kona_gpio_irq_unmask(d);
+	return 0;
+}
+
+static void bcm_kona_gpio_irq_shutdown(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
+
+	bcm_kona_gpio_irq_mask(d);
+	gpio_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq);
+}
+
 static struct irq_chip bcm_gpio_irq_chip = {
 	.name = "bcm-kona-gpio",
 	.irq_ack = bcm_kona_gpio_irq_ack,
 	.irq_mask = bcm_kona_gpio_irq_mask,
 	.irq_unmask = bcm_kona_gpio_irq_unmask,
 	.irq_set_type = bcm_kona_gpio_irq_set_type,
+	.irq_startup = bcm_kona_gpio_irq_startup,
+	.irq_shutdown = bcm_kona_gpio_irq_shutdown,
 };
 
 static struct __initconst of_device_id bcm_kona_gpio_of_match[] = {

drivers/gpio/gpio-bt8xx.c

@@ -169,7 +169,7 @@ static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
 	c->dbg_show = NULL;
 	c->base = modparam_gpiobase;
 	c->ngpio = BT8XXGPIO_NR_GPIOS;
-	c->can_sleep = 0;
+	c->can_sleep = false;
 }
 
 static int bt8xxgpio_probe(struct pci_dev *dev,
@@ -308,7 +308,7 @@ static int bt8xxgpio_resume(struct pci_dev *pdev)
 #define bt8xxgpio_resume NULL
 #endif /* CONFIG_PM */
 
-static DEFINE_PCI_DEVICE_TABLE(bt8xxgpio_pci_tbl) = {
+static const struct pci_device_id bt8xxgpio_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },

drivers/gpio/gpio-clps711x.c

@@ -77,7 +77,7 @@ static int clps711x_gpio_remove(struct platform_device *pdev)
 	return bgpio_remove(bgc);
 }
 
-static const struct of_device_id clps711x_gpio_ids[] = {
+static const struct of_device_id __maybe_unused clps711x_gpio_ids[] = {
 	{ .compatible = "cirrus,clps711x-gpio" },
 	{ }
 };
@@ -87,7 +87,7 @@ static struct platform_driver clps711x_gpio_driver = {
 	.driver	= {
 		.name		= "clps711x-gpio",
 		.owner		= THIS_MODULE,
-		.of_match_table	= clps711x_gpio_ids,
+		.of_match_table	= of_match_ptr(clps711x_gpio_ids),
 	},
 	.probe	= clps711x_gpio_probe,
 	.remove	= clps711x_gpio_remove,

drivers/gpio/gpio-da9052.c

@@ -200,7 +200,7 @@ static struct gpio_chip reference_gp = {
 	.direction_input = da9052_gpio_direction_input,
 	.direction_output = da9052_gpio_direction_output,
 	.to_irq = da9052_gpio_to_irq,
-	.can_sleep = 1,
+	.can_sleep = true,
 	.ngpio = 16,
 	.base = -1,
 };

drivers/gpio/gpio-da9055.c

@@ -134,7 +134,7 @@ static struct gpio_chip reference_gp = {
 	.direction_input = da9055_gpio_direction_input,
 	.direction_output = da9055_gpio_direction_output,
 	.to_irq = da9055_gpio_to_irq,
-	.can_sleep = 1,
+	.can_sleep = true,
 	.ngpio = 3,
 	.base = -1,
 };

drivers/gpio/gpio-em.c

@@ -99,6 +99,27 @@ static void em_gio_irq_enable(struct irq_data *d)
 	em_gio_write(p, GIO_IEN, BIT(irqd_to_hwirq(d)));
 }
 
+static unsigned int em_gio_irq_startup(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&p->gpio_chip, irqd_to_hwirq(d)))
+		dev_err(p->gpio_chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	em_gio_irq_enable(d);
+	return 0;
+}
+
+static void em_gio_irq_shutdown(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	em_gio_irq_disable(d);
+	gpio_unlock_as_irq(&p->gpio_chip, irqd_to_hwirq(d));
+}
+
+
 #define GIO_ASYNC(x) (x + 8)
 
 static unsigned char em_gio_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
@@ -328,6 +349,7 @@ static int em_gio_probe(struct platform_device *pdev)
 	gpio_chip->request = em_gio_request;
 	gpio_chip->free = em_gio_free;
 	gpio_chip->label = name;
+	gpio_chip->dev = &pdev->dev;
 	gpio_chip->owner = THIS_MODULE;
 	gpio_chip->base = pdata->gpio_base;
 	gpio_chip->ngpio = pdata->number_of_pins;
@@ -336,10 +358,10 @@ static int em_gio_probe(struct platform_device *pdev)
 	irq_chip->name = name;
 	irq_chip->irq_mask = em_gio_irq_disable;
 	irq_chip->irq_unmask = em_gio_irq_enable;
-	irq_chip->irq_enable = em_gio_irq_enable;
-	irq_chip->irq_disable = em_gio_irq_disable;
 	irq_chip->irq_set_type = em_gio_irq_set_type;
-	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE;
+	irq_chip->irq_startup = em_gio_irq_startup;
+	irq_chip->irq_shutdown = em_gio_irq_shutdown;
+	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
 
 	p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
 					      pdata->number_of_pins,

drivers/gpio/gpio-f7188x.c

@@ -135,6 +135,7 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
 			.set              = f7188x_gpio_set,		\
 			.base             = _base,			\
 			.ngpio            = _ngpio,			\
+			.can_sleep        = true,			\
 		},							\
 		.regbase = _regbase,					\
 	}

drivers/gpio/gpio-ich.c

@@ -252,7 +252,7 @@ static void ichx_gpiolib_setup(struct gpio_chip *chip)
 	chip->direction_output = ichx_gpio_direction_output;
 	chip->base = modparam_gpiobase;
 	chip->ngpio = ichx_priv.desc->ngpio;
-	chip->can_sleep = 0;
+	chip->can_sleep = false;
 	chip->dbg_show = NULL;
 }
 

drivers/gpio/gpio-intel-mid.c

@@ -235,11 +235,33 @@ static void intel_mid_irq_mask(struct irq_data *d)
 {
 }
 
+static unsigned int intel_mid_irq_startup(struct irq_data *d)
+{
+	struct intel_mid_gpio *priv = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&priv->chip, irqd_to_hwirq(d)))
+		dev_err(priv->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	intel_mid_irq_unmask(d);
+	return 0;
+}
+
+static void intel_mid_irq_shutdown(struct irq_data *d)
+{
+	struct intel_mid_gpio *priv = irq_data_get_irq_chip_data(d);
+
+	intel_mid_irq_mask(d);
+	gpio_unlock_as_irq(&priv->chip, irqd_to_hwirq(d));
+}
+
 static struct irq_chip intel_mid_irqchip = {
 	.name		= "INTEL_MID-GPIO",
 	.irq_mask	= intel_mid_irq_mask,
 	.irq_unmask	= intel_mid_irq_unmask,
 	.irq_set_type	= intel_mid_irq_type,
+	.irq_startup	= intel_mid_irq_startup,
+	.irq_shutdown	= intel_mid_irq_shutdown,
 };
 
 static const struct intel_mid_gpio_ddata gpio_lincroft = {
@@ -275,7 +297,7 @@ static const struct intel_mid_gpio_ddata gpio_tangier = {
 	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(intel_gpio_ids) = {
+static const struct pci_device_id intel_gpio_ids[] = {
 	{
 		/* Lincroft */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f),
@@ -358,8 +380,7 @@ static int intel_gpio_irq_map(struct irq_domain *d, unsigned int irq,
 {
 	struct intel_mid_gpio *priv = d->host_data;
 
-	irq_set_chip_and_handler_name(irq, &intel_mid_irqchip,
-				      handle_simple_irq, "demux");
+	irq_set_chip_and_handler(irq, &intel_mid_irqchip, handle_simple_irq);
 	irq_set_chip_data(irq, priv);
 	irq_set_irq_type(irq, IRQ_TYPE_NONE);
 
@@ -418,6 +439,7 @@ static int intel_gpio_probe(struct pci_dev *pdev,
 
 	priv->reg_base = pcim_iomap_table(pdev)[0];
 	priv->chip.label = dev_name(&pdev->dev);
+	priv->chip.dev = &pdev->dev;
 	priv->chip.request = intel_gpio_request;
 	priv->chip.direction_input = intel_gpio_direction_input;
 	priv->chip.direction_output = intel_gpio_direction_output;
@@ -426,7 +448,7 @@ static int intel_gpio_probe(struct pci_dev *pdev,
 	priv->chip.to_irq = intel_gpio_to_irq;
 	priv->chip.base = gpio_base;
 	priv->chip.ngpio = ddata->ngpio;
-	priv->chip.can_sleep = 0;
+	priv->chip.can_sleep = false;
 	priv->pdev = pdev;
 
 	spin_lock_init(&priv->lock);

drivers/gpio/gpio-kempld.c

@@ -167,7 +167,7 @@ static int kempld_gpio_probe(struct platform_device *pdev)
 	chip->label = "gpio-kempld";
 	chip->owner = THIS_MODULE;
 	chip->dev = dev;
-	chip->can_sleep = 1;
+	chip->can_sleep = true;
 	if (pdata && pdata->gpio_base)
 		chip->base = pdata->gpio_base;
 	else

drivers/gpio/gpio-ks8695.c

@@ -228,7 +228,7 @@ static struct gpio_chip ks8695_gpio_chip = {
 	.to_irq			= ks8695_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= 16,
-	.can_sleep		= 0,
+	.can_sleep		= false,
 };
 
 /* Register the GPIOs */

drivers/gpio/gpio-lpc32xx.c

@@ -25,10 +25,10 @@
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/gpio-lpc32xx.h>
 #include <mach/irqs.h>
 
 #define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
@@ -448,7 +448,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.base			= LPC32XX_GPIO_P0_GRP,
 			.ngpio			= LPC32XX_GPIO_P0_MAX,
 			.names			= gpio_p0_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p0,
 	},
@@ -464,7 +464,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.base			= LPC32XX_GPIO_P1_GRP,
 			.ngpio			= LPC32XX_GPIO_P1_MAX,
 			.names			= gpio_p1_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p1,
 	},
@@ -479,7 +479,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.base			= LPC32XX_GPIO_P2_GRP,
 			.ngpio			= LPC32XX_GPIO_P2_MAX,
 			.names			= gpio_p2_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p2,
 	},
@@ -495,7 +495,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.base			= LPC32XX_GPIO_P3_GRP,
 			.ngpio			= LPC32XX_GPIO_P3_MAX,
 			.names			= gpio_p3_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p3,
 	},
@@ -509,7 +509,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.base			= LPC32XX_GPI_P3_GRP,
 			.ngpio			= LPC32XX_GPI_P3_MAX,
 			.names			= gpi_p3_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p3,
 	},
@@ -523,7 +523,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 			.base			= LPC32XX_GPO_P3_GRP,
 			.ngpio			= LPC32XX_GPO_P3_MAX,
 			.names			= gpo_p3_names,
-			.can_sleep		= 0,
+			.can_sleep		= false,
 		},
 		.gpio_grp = &gpio_grp_regs_p3,
 	},

drivers/gpio/gpio-lynxpoint.c

@@ -301,6 +301,26 @@ static void lp_irq_disable(struct irq_data *d)
 	spin_unlock_irqrestore(&lg->lock, flags);
 }
 
+static unsigned int lp_irq_startup(struct irq_data *d)
+{
+	struct lp_gpio *lg = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&lg->chip, irqd_to_hwirq(d)))
+		dev_err(lg->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	lp_irq_enable(d);
+	return 0;
+}
+
+static void lp_irq_shutdown(struct irq_data *d)
+{
+	struct lp_gpio *lg = irq_data_get_irq_chip_data(d);
+
+	lp_irq_disable(d);
+	gpio_unlock_as_irq(&lg->chip, irqd_to_hwirq(d));
+}
+
 static struct irq_chip lp_irqchip = {
 	.name = "LP-GPIO",
 	.irq_mask = lp_irq_mask,
@@ -308,6 +328,8 @@ static struct irq_chip lp_irqchip = {
 	.irq_enable = lp_irq_enable,
 	.irq_disable = lp_irq_disable,
 	.irq_set_type = lp_irq_type,
+	.irq_startup = lp_irq_startup,
+	.irq_shutdown = lp_irq_shutdown,
 	.flags = IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -331,8 +353,7 @@ static int lp_gpio_irq_map(struct irq_domain *d, unsigned int irq,
 {
 	struct lp_gpio *lg = d->host_data;
 
-	irq_set_chip_and_handler_name(irq, &lp_irqchip, handle_simple_irq,
-				      "demux");
+	irq_set_chip_and_handler(irq, &lp_irqchip, handle_simple_irq);
 	irq_set_chip_data(irq, lg);
 	irq_set_irq_type(irq, IRQ_TYPE_NONE);
 
@@ -392,7 +413,7 @@ static int lp_gpio_probe(struct platform_device *pdev)
 	gc->set = lp_gpio_set;
 	gc->base = -1;
 	gc->ngpio = LP_NUM_GPIO;
-	gc->can_sleep = 0;
+	gc->can_sleep = false;
 	gc->dev = dev;
 
 	/* set up interrupts  */
@@ -438,6 +459,7 @@ static const struct dev_pm_ops lp_gpio_pm_ops = {
 
 static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
 	{ "INT33C7", 0 },
+	{ "INT3437", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match);
@@ -469,4 +491,15 @@ static int __init lp_gpio_init(void)
 	return platform_driver_register(&lp_gpio_driver);
 }
 
+static void __exit lp_gpio_exit(void)
+{
+	platform_driver_unregister(&lp_gpio_driver);
+}
+
 subsys_initcall(lp_gpio_init);
+module_exit(lp_gpio_exit);
+
+MODULE_AUTHOR("Mathias Nyman (Intel)");
+MODULE_DESCRIPTION("GPIO interface for Intel Lynxpoint");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp_gpio");

drivers/gpio/gpio-max730x.c

@@ -188,7 +188,7 @@ int __max730x_probe(struct max7301 *ts)
 	ts->chip.set = max7301_set;
 
 	ts->chip.ngpio = PIN_NUMBER;
-	ts->chip.can_sleep = 1;
+	ts->chip.can_sleep = true;
 	ts->chip.dev = dev;
 	ts->chip.owner = THIS_MODULE;
 
@@ -220,7 +220,6 @@ int __max730x_probe(struct max7301 *ts)
 	return ret;
 
 exit_destroy:
-	dev_set_drvdata(dev, NULL);
 	mutex_destroy(&ts->lock);
 	return ret;
 }
@@ -234,8 +233,6 @@ int __max730x_remove(struct device *dev)
 	if (ts == NULL)
 		return -ENODEV;
 
-	dev_set_drvdata(dev, NULL);
-
 	/* Power down the chip and disable IRQ output */
 	ts->write(dev, 0x04, 0x00);
 

drivers/gpio/gpio-max732x.c

@@ -564,7 +564,7 @@ static int max732x_setup_gpio(struct max732x_chip *chip,
 		gc->set = max732x_gpio_set_value;
 	}
 	gc->get = max732x_gpio_get_value;
-	gc->can_sleep = 1;
+	gc->can_sleep = true;
 
 	gc->base = gpio_start;
 	gc->ngpio = port;

drivers/gpio/gpio-mc33880.c

@@ -115,7 +115,7 @@ static int mc33880_probe(struct spi_device *spi)
 	mc->chip.set = mc33880_set;
 	mc->chip.base = pdata->base;
 	mc->chip.ngpio = PIN_NUMBER;
-	mc->chip.can_sleep = 1;
+	mc->chip.can_sleep = true;
 	mc->chip.dev = &spi->dev;
 	mc->chip.owner = THIS_MODULE;
 

drivers/gpio/gpio-mc9s08dz60.c

@@ -102,7 +102,7 @@ static int mc9s08dz60_probe(struct i2c_client *client,
 	mc9s->chip.dev = &client->dev;
 	mc9s->chip.owner = THIS_MODULE;
 	mc9s->chip.ngpio = GPIO_NUM;
-	mc9s->chip.can_sleep = 1;
+	mc9s->chip.can_sleep = true;
 	mc9s->chip.get = mc9s08dz60_get_value;
 	mc9s->chip.set = mc9s08dz60_set_value;
 	mc9s->chip.direction_output = mc9s08dz60_direction_output;

drivers/gpio/gpio-mcp23s08.c

 /*
- * MCP23S08 SPI/GPIO gpio expander driver
+ * MCP23S08 SPI/I2C GPIO gpio expander driver
+ *
+ * The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
+ * supported.
+ * For the I2C versions of the chips (mcp23008 and mcp23017) generation of
+ * interrupts is also supported.
+ * The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is
+ * also capable of generating interrupts, but the linux driver does not
+ * support that yet.
  */
 
 #include <linux/kernel.h>
@@ -12,7 +20,8 @@
 #include <linux/spi/mcp23s08.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
-#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <linux/of_device.h>
 
 /**
@@ -34,6 +43,7 @@
 #define MCP_DEFVAL	0x03
 #define MCP_INTCON	0x04
 #define MCP_IOCON	0x05
+#	define IOCON_MIRROR	(1 << 6)
 #	define IOCON_SEQOP	(1 << 5)
 #	define IOCON_HAEN	(1 << 3)
 #	define IOCON_ODR	(1 << 2)
@@ -57,8 +67,14 @@ struct mcp23s08 {
 	u8			addr;
 
 	u16			cache[11];
+	u16			irq_rise;
+	u16			irq_fall;
+	int			irq;
+	bool			irq_controller;
 	/* lock protects the cached values */
 	struct mutex		lock;
+	struct mutex		irq_lock;
+	struct irq_domain	*irq_domain;
 
 	struct gpio_chip	chip;
 
@@ -77,6 +93,11 @@ struct mcp23s08_driver_data {
 	struct mcp23s08		chip[];
 };
 
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 /*----------------------------------------------------------------------*/
 
 #if IS_ENABLED(CONFIG_I2C)
@@ -315,6 +336,195 @@ mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
 	return status;
 }
 
+/*----------------------------------------------------------------------*/
+static irqreturn_t mcp23s08_irq(int irq, void *data)
+{
+	struct mcp23s08 *mcp = data;
+	int intcap, intf, i;
+	unsigned int child_irq;
+
+	mutex_lock(&mcp->lock);
+	intf = mcp->ops->read(mcp, MCP_INTF);
+	if (intf < 0) {
+		mutex_unlock(&mcp->lock);
+		return IRQ_HANDLED;
+	}
+
+	mcp->cache[MCP_INTF] = intf;
+
+	intcap = mcp->ops->read(mcp, MCP_INTCAP);
+	if (intcap < 0) {
+		mutex_unlock(&mcp->lock);
+		return IRQ_HANDLED;
+	}
+
+	mcp->cache[MCP_INTCAP] = intcap;
+	mutex_unlock(&mcp->lock);
+
+
+	for (i = 0; i < mcp->chip.ngpio; i++) {
+		if ((BIT(i) & mcp->cache[MCP_INTF]) &&
+		    ((BIT(i) & intcap & mcp->irq_rise) ||
+		     (mcp->irq_fall & ~intcap & BIT(i)))) {
+			child_irq = irq_find_mapping(mcp->irq_domain, i);
+			handle_nested_irq(child_irq);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
+
+	return irq_find_mapping(mcp->irq_domain, offset);
+}
+
+static void mcp23s08_irq_mask(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+	unsigned int pos = data->hwirq;
+
+	mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
+}
+
+static void mcp23s08_irq_unmask(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+	unsigned int pos = data->hwirq;
+
+	mcp->cache[MCP_GPINTEN] |= BIT(pos);
+}
+
+static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+	unsigned int pos = data->hwirq;
+	int status = 0;
+
+	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		mcp->cache[MCP_INTCON] &= ~BIT(pos);
+		mcp->irq_rise |= BIT(pos);
+		mcp->irq_fall |= BIT(pos);
+	} else if (type & IRQ_TYPE_EDGE_RISING) {
+		mcp->cache[MCP_INTCON] &= ~BIT(pos);
+		mcp->irq_rise |= BIT(pos);
+		mcp->irq_fall &= ~BIT(pos);
+	} else if (type & IRQ_TYPE_EDGE_FALLING) {
+		mcp->cache[MCP_INTCON] &= ~BIT(pos);
+		mcp->irq_rise &= ~BIT(pos);
+		mcp->irq_fall |= BIT(pos);
+	} else
+		return -EINVAL;
+
+	return status;
+}
+
+static void mcp23s08_irq_bus_lock(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&mcp->irq_lock);
+}
+
+static void mcp23s08_irq_bus_unlock(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&mcp->lock);
+	mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
+	mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
+	mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
+	mutex_unlock(&mcp->lock);
+	mutex_unlock(&mcp->irq_lock);
+}
+
+static unsigned int mcp23s08_irq_startup(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	if (gpio_lock_as_irq(&mcp->chip, data->hwirq))
+		dev_err(mcp->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ usage\n",
+			data->hwirq);
+
+	mcp23s08_irq_unmask(data);
+	return 0;
+}
+
+static void mcp23s08_irq_shutdown(struct irq_data *data)
+{
+	struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+	mcp23s08_irq_mask(data);
+	gpio_unlock_as_irq(&mcp->chip, data->hwirq);
+}
+
+static struct irq_chip mcp23s08_irq_chip = {
+	.name = "gpio-mcp23xxx",
+	.irq_mask = mcp23s08_irq_mask,
+	.irq_unmask = mcp23s08_irq_unmask,
+	.irq_set_type = mcp23s08_irq_set_type,
+	.irq_bus_lock = mcp23s08_irq_bus_lock,
+	.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
+	.irq_startup = mcp23s08_irq_startup,
+	.irq_shutdown = mcp23s08_irq_shutdown,
+};
+
+static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
+{
+	struct gpio_chip *chip = &mcp->chip;
+	int err, irq, j;
+
+	mutex_init(&mcp->irq_lock);
+
+	mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio,
+						&irq_domain_simple_ops, mcp);
+	if (!mcp->irq_domain)
+		return -ENODEV;
+
+	err = devm_request_threaded_irq(chip->dev, mcp->irq, NULL, mcp23s08_irq,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					dev_name(chip->dev), mcp);
+	if (err != 0) {
+		dev_err(chip->dev, "unable to request IRQ#%d: %d\n",
+			mcp->irq, err);
+		return err;
+	}
+
+	chip->to_irq = mcp23s08_gpio_to_irq;
+
+	for (j = 0; j < mcp->chip.ngpio; j++) {
+		irq = irq_create_mapping(mcp->irq_domain, j);
+		irq_set_lockdep_class(irq, &gpio_lock_class);
+		irq_set_chip_data(irq, mcp);
+		irq_set_chip(irq, &mcp23s08_irq_chip);
+		irq_set_nested_thread(irq, true);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		irq_set_noprobe(irq);
+#endif
+	}
+	return 0;
+}
+
+static void mcp23s08_irq_teardown(struct mcp23s08 *mcp)
+{
+	unsigned int irq, i;
+
+	free_irq(mcp->irq, mcp);
+
+	for (i = 0; i < mcp->chip.ngpio; i++) {
+		irq = irq_find_mapping(mcp->irq_domain, i);
+		if (irq > 0)
+			irq_dispose_mapping(irq);
+	}
+
+	irq_domain_remove(mcp->irq_domain);
+}
+
 /*----------------------------------------------------------------------*/
 
 #ifdef CONFIG_DEBUG_FS
@@ -370,10 +580,11 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 /*----------------------------------------------------------------------*/
 
 static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
-			      void *data, unsigned addr,
-			      unsigned type, unsigned base, unsigned pullups)
+			      void *data, unsigned addr, unsigned type,
+			      unsigned base, unsigned pullups)
 {
 	int status;
+	bool mirror = false;
 
 	mutex_init(&mcp->lock);
 
@@ -425,20 +636,32 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	}
 
 	mcp->chip.base = base;
-	mcp->chip.can_sleep = 1;
+	mcp->chip.can_sleep = true;
 	mcp->chip.dev = dev;
 	mcp->chip.owner = THIS_MODULE;
 
 	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
 	 * and MCP_IOCON.HAEN = 1, so we work with all chips.
 	 */
+
 	status = mcp->ops->read(mcp, MCP_IOCON);
 	if (status < 0)
 		goto fail;
-	if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
+
+	mcp->irq_controller = of_property_read_bool(mcp->chip.of_node,
+						"interrupt-controller");
+	if (mcp->irq && mcp->irq_controller && (type == MCP_TYPE_017))
+		mirror = of_property_read_bool(mcp->chip.of_node,
+						"microchip,irq-mirror");
+
+	if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) {
 		/* mcp23s17 has IOCON twice, make sure they are in sync */
 		status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
 		status |= IOCON_HAEN | (IOCON_HAEN << 8);
+		status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
+		if (mirror)
+			status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
+
 		status = mcp->ops->write(mcp, MCP_IOCON, status);
 		if (status < 0)
 			goto fail;
@@ -470,6 +693,16 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	}
 
 	status = gpiochip_add(&mcp->chip);
+	if (status < 0)
+		goto fail;
+
+	if (mcp->irq && mcp->irq_controller) {
+		status = mcp23s08_irq_setup(mcp);
+		if (status) {
+			mcp23s08_irq_teardown(mcp);
+			goto fail;
+		}
+	}
 fail:
 	if (status < 0)
 		dev_dbg(dev, "can't setup chip %d, --> %d\n",
@@ -546,6 +779,7 @@ static int mcp230xx_probe(struct i2c_client *client,
 	if (match || !pdata) {
 		base = -1;
 		pullups = 0;
+		client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
 	} else {
 		if (!gpio_is_valid(pdata->base)) {
 			dev_dbg(&client->dev, "invalid platform data\n");
@@ -559,6 +793,7 @@ static int mcp230xx_probe(struct i2c_client *client,
 	if (!mcp)
 		return -ENOMEM;
 
+	mcp->irq = client->irq;
 	status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
 				    id->driver_data, base, pullups);
 	if (status)
@@ -579,6 +814,9 @@ static int mcp230xx_remove(struct i2c_client *client)
 	struct mcp23s08 *mcp = i2c_get_clientdata(client);
 	int status;
 
+	if (client->irq && mcp->irq_controller)
+		mcp23s08_irq_teardown(mcp);
+
 	status = gpiochip_remove(&mcp->chip);
 	if (status == 0)
 		kfree(mcp);
@@ -640,7 +878,7 @@ static int mcp23s08_probe(struct spi_device *spi)
 
 	match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
 	if (match) {
-		type = (int)match->data;
+		type = (int)(uintptr_t)match->data;
 		status = of_property_read_u32(spi->dev.of_node,
 			    "microchip,spi-present-mask", &spi_present_mask);
 		if (status) {

drivers/gpio/gpio-ml-ioh.c

@@ -242,7 +242,7 @@ static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
 	gpio->dbg_show = NULL;
 	gpio->base = -1;
 	gpio->ngpio = num_port;
-	gpio->can_sleep = 0;
+	gpio->can_sleep = false;
 	gpio->to_irq = ioh_gpio_to_irq;
 }
 
@@ -596,7 +596,7 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 #define ioh_gpio_resume NULL
 #endif
 
-static DEFINE_PCI_DEVICE_TABLE(ioh_gpio_pcidev_id) = {
+static const struct pci_device_id ioh_gpio_pcidev_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) },
 	{ 0, }
 };

drivers/gpio/gpio-moxart.c

+/*
+ * MOXA ART SoCs GPIO driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/bitops.h>
+
+#define GPIO_DATA_OUT		0x00
+#define GPIO_DATA_IN		0x04
+#define GPIO_PIN_DIRECTION	0x08
+
+struct moxart_gpio_chip {
+	struct gpio_chip gpio;
+	void __iomem *base;
+};
+
+static inline struct moxart_gpio_chip *to_moxart_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct moxart_gpio_chip, gpio);
+}
+
+static int moxart_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return pinctrl_request_gpio(offset);
+}
+
+static void moxart_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	pinctrl_free_gpio(offset);
+}
+
+static int moxart_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	void __iomem *ioaddr = gc->base + GPIO_PIN_DIRECTION;
+
+	writel(readl(ioaddr) & ~BIT(offset), ioaddr);
+	return 0;
+}
+
+static int moxart_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	void __iomem *ioaddr = gc->base + GPIO_PIN_DIRECTION;
+
+	writel(readl(ioaddr) | BIT(offset), ioaddr);
+	return 0;
+}
+
+static void moxart_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	void __iomem *ioaddr = gc->base + GPIO_DATA_OUT;
+	u32 reg = readl(ioaddr);
+
+	if (value)
+		reg = reg | BIT(offset);
+	else
+		reg = reg & ~BIT(offset);
+
+
+	writel(reg, ioaddr);
+}
+
+static int moxart_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct moxart_gpio_chip *gc = to_moxart_gpio(chip);
+	u32 ret = readl(gc->base + GPIO_PIN_DIRECTION);
+
+	if (ret & BIT(offset))
+		return !!(readl(gc->base + GPIO_DATA_OUT) & BIT(offset));
+	else
+		return !!(readl(gc->base + GPIO_DATA_IN) & BIT(offset));
+}
+
+static struct gpio_chip moxart_template_chip = {
+	.label			= "moxart-gpio",
+	.request		= moxart_gpio_request,
+	.free			= moxart_gpio_free,
+	.direction_input	= moxart_gpio_direction_input,
+	.direction_output	= moxart_gpio_direction_output,
+	.set			= moxart_gpio_set,
+	.get			= moxart_gpio_get,
+	.ngpio			= 32,
+	.owner			= THIS_MODULE,
+};
+
+static int moxart_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct moxart_gpio_chip *mgc;
+	int ret;
+
+	mgc = devm_kzalloc(dev, sizeof(*mgc), GFP_KERNEL);
+	if (!mgc) {
+		dev_err(dev, "can't allocate GPIO chip container\n");
+		return -ENOMEM;
+	}
+	mgc->gpio = moxart_template_chip;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mgc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(mgc->base))
+		return PTR_ERR(mgc->base);
+
+	mgc->gpio.dev = dev;
+
+	ret = gpiochip_add(&mgc->gpio);
+	if (ret) {
+		dev_err(dev, "%s: gpiochip_add failed\n",
+			dev->of_node->full_name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id moxart_gpio_match[] = {
+	{ .compatible = "moxa,moxart-gpio" },
+	{ }
+};
+
+static struct platform_driver moxart_gpio_driver = {
+	.driver	= {
+		.name		= "moxart-gpio",
+		.owner		= THIS_MODULE,
+		.of_match_table	= moxart_gpio_match,
+	},
+	.probe	= moxart_gpio_probe,
+};
+module_platform_driver(moxart_gpio_driver);
+
+MODULE_DESCRIPTION("MOXART GPIO chip driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");