mfd: Fix TWL4030 COR bit polarity for BCI SIH block

The chip TRM documentation contradicts itself about this bit, page 174
of swcu050e says bit should be 0 for clear-on-read behavior, while
page 487 says it should be 1. Testing shows it should be 1, so set
the .set_cor flag accordingly. This is needed for upcoming BCI
charging driver to function.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/twl4030-irq.c

@@ -144,6 +144,7 @@ static const struct sih sih_modules_twl4030[6] = {
 		.name		= "bci",
 		.module		= TWL4030_MODULE_INTERRUPTS,
 		.control_offset	= TWL4030_INTERRUPTS_BCISIHCTRL,
+		.set_cor	= true,
 		.bits		= 12,
 		.bytes_ixr	= 2,
 		.edr_offset	= TWL4030_INTERRUPTS_BCIEDR1,
@@ -408,7 +409,7 @@ static int twl4030_init_sih_modules(unsigned line)
 		 * set Clear-On-Read (COR) bit.
 		 *
 		 * NOTE that sometimes COR polarity is documented as being
-		 * inverted:  for MADC and BCI, COR=1 means "clear on write".
+		 * inverted:  for MADC, COR=1 means "clear on write".
 		 * And for PWR_INT it's not documented...
 		 */
 		if (sih->set_cor) {