ixgbe: list X553 backplane speeds correctly

We forgot to indicate some of the supported speed on the X553
backplane.  This patch attempts to correct for that.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe_type.h

@@ -3775,6 +3775,11 @@ struct ixgbe_info {
 
 #define IXGBE_NW_MNG_IF_SEL		0x00011178
 #define IXGBE_NW_MNG_IF_SEL_MDIO_ACT		BIT(1)
+#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10M	BIT(17)
+#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_100M	BIT(18)
+#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G	BIT(19)
+#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G	BIT(20)
+#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G	BIT(21)
 #define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M	BIT(23)
 #define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE	BIT(24)
 #define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT	3

drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

@@ -2241,6 +2241,20 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
 		case ixgbe_phy_sgmii:
 			*speed = IXGBE_LINK_SPEED_1GB_FULL;
 			break;
+		case ixgbe_phy_x550em_kr:
+			if (hw->mac.type == ixgbe_mac_x550em_a) {
+				/* check different backplane modes */
+				if (hw->phy.nw_mng_if_sel &
+				    IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) {
+					*speed = IXGBE_LINK_SPEED_2_5GB_FULL;
+					break;
+				} else if (hw->device_id ==
+					   IXGBE_DEV_ID_X550EM_A_KR_L) {
+					*speed = IXGBE_LINK_SPEED_1GB_FULL;
+					break;
+				}
+			}
+			/* fall through */
 		default:
 			*speed = IXGBE_LINK_SPEED_10GB_FULL |
 				 IXGBE_LINK_SPEED_1GB_FULL;