Commit 8eba07d3 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven

pinctrl: sh-pfc: r8a7778: Use new macros for non-GPIO pins

Update the R-Car M1A pin control driver to use the new macros for
describing pins without GPIO functionality.  This replaces the use of
physical pin numbers on the R-Car M1A SoC (in 25x25 FCBGA package) by
symbolic enum values, referring to signal names.

Note that the user-visible names of these pins are still based on pin
numbers instead of signal names, to preserve DT backwards compatibility.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
parent 587a9b5d
......@@ -29,6 +29,11 @@
PORT_GP_CFG_32(3, fn, sfx, SH_PFC_PIN_CFG_PULL_UP), \
PORT_GP_CFG_27(4, fn, sfx, SH_PFC_PIN_CFG_PULL_UP)
#define CPU_ALL_NOGP(fn) \
PIN_NOGP(CLKOUT, "B25", fn), \
PIN_NOGP(CS0, "A20", fn), \
PIN_NOGP(CS1_A26, "C20", fn)
enum {
PINMUX_RESERVED = 0,
......@@ -1237,19 +1242,17 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP10_24_22, CAN_CLK_C, SEL_CANCLK_C),
};
/* Pin numbers for pins without a corresponding GPIO port number are computed
* from the row and column numbers with a 1000 offset to avoid collisions with
* GPIO port numbers.
/*
* Pins not associated with a GPIO port.
*/
#define PIN_NUMBER(row, col) (1000+((row)-1)*25+(col)-1)
enum {
GP_ASSIGN_LAST(),
NOGP_ALL(),
};
static const struct sh_pfc_pin pinmux_pins[] = {
PINMUX_GPIO_GP_ALL(),
/* Pins not associated with a GPIO port */
SH_PFC_PIN_NAMED(3, 20, C20),
SH_PFC_PIN_NAMED(1, 20, A20),
SH_PFC_PIN_NAMED(2, 25, B25),
PINMUX_NOGP_ALL(),
};
/* - macro */
......@@ -1384,7 +1387,7 @@ HSPI_PFC_DAT(hspi1_a, HSPI_CLK1_A, HSPI_CS1_A,
HSPI_RX1_A, HSPI_TX1_A);
HSPI_PFC_PIN(hspi1_b, RCAR_GP_PIN(0, 27), RCAR_GP_PIN(0, 26),
PIN_NUMBER(1, 20), PIN_NUMBER(2, 25));
PIN_CS0, PIN_CLKOUT);
HSPI_PFC_DAT(hspi1_b, HSPI_CLK1_B, HSPI_CS1_B,
HSPI_RX1_B, HSPI_TX1_B);
......@@ -1410,7 +1413,7 @@ I2C_PFC_PIN(i2c1_b, RCAR_GP_PIN(4, 17), RCAR_GP_PIN(4, 18));
I2C_PFC_MUX(i2c1_b, SDA1_B, SCL1_B);
/* - I2C2 ------------------------------------------------------------------ */
I2C_PFC_PIN(i2c2_a, PIN_NUMBER(3, 20), RCAR_GP_PIN(1, 3));
I2C_PFC_PIN(i2c2_a, PIN_CS1_A26, RCAR_GP_PIN(1, 3));
I2C_PFC_MUX(i2c2_a, SDA2_A, SCL2_A);
I2C_PFC_PIN(i2c2_b, RCAR_GP_PIN(0, 3), RCAR_GP_PIN(0, 4));
I2C_PFC_MUX(i2c2_b, SDA2_B, SCL2_B);
......@@ -1500,7 +1503,7 @@ SCIF_PFC_PIN(scif2_data_e, RCAR_GP_PIN(0, 3), RCAR_GP_PIN(0, 4));
SCIF_PFC_DAT(scif2_data_e, TX2_E, RX2_E);
SCIF_PFC_PIN(scif2_clk_a, RCAR_GP_PIN(3, 9));
SCIF_PFC_CLK(scif2_clk_a, SCK2_A);
SCIF_PFC_PIN(scif2_clk_b, PIN_NUMBER(3, 20));
SCIF_PFC_PIN(scif2_clk_b, PIN_CS1_A26);
SCIF_PFC_CLK(scif2_clk_b, SCK2_B);
SCIF_PFC_PIN(scif2_clk_c, RCAR_GP_PIN(4, 12));
SCIF_PFC_CLK(scif2_clk_c, SCK2_C);
......@@ -1615,7 +1618,7 @@ SSI_PFC_PINS(ssi0_data, RCAR_GP_PIN(3, 10));
SSI_PFC_DATA(ssi0_data, SSI_SDATA0);
SSI_PFC_PINS(ssi1_a_ctrl, RCAR_GP_PIN(2, 20), RCAR_GP_PIN(2, 21));
SSI_PFC_CTRL(ssi1_a_ctrl, SSI_SCK1_A, SSI_WS1_A);
SSI_PFC_PINS(ssi1_b_ctrl, PIN_NUMBER(3, 20), RCAR_GP_PIN(1, 3));
SSI_PFC_PINS(ssi1_b_ctrl, PIN_CS1_A26, RCAR_GP_PIN(1, 3));
SSI_PFC_CTRL(ssi1_b_ctrl, SSI_SCK1_B, SSI_WS1_B);
SSI_PFC_PINS(ssi1_data, RCAR_GP_PIN(3, 9));
SSI_PFC_DATA(ssi1_data, SSI_SDATA1);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment