drm/amd/display: change number of cursor policy for dml calculation.

[Why]
vstartup calculation is incorrect due to use 2 number of cursors and
result in an underflow when playing video in full screen mode and
combines graphic plane and video plane.

[How]
Apply new policy for dml calculation.
1 cursor for graphic plane, 0 cursor for video plane.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c

@@ -299,7 +299,6 @@ void optc1_set_vtg_params(struct timing_generator *optc,
 	uint32_t asic_blank_end;
 	uint32_t v_init;
 	uint32_t v_fp2 = 0;
-	int32_t vertical_line_start;
 
 	struct optc *optc1 = DCN10TG_FROM_TG(optc);
 
@@ -316,9 +315,8 @@ void optc1_set_vtg_params(struct timing_generator *optc,
 			patched_crtc_timing.v_border_top;
 
 	/* if VSTARTUP is before VSYNC, FP2 is the offset, otherwise 0 */
-	vertical_line_start = asic_blank_end - optc1->vstartup_start + 1;
-	if (vertical_line_start < 0)
-		v_fp2 = -vertical_line_start;
+	if (optc1->vstartup_start > asic_blank_end)
+		v_fp2 = optc1->vstartup_start - asic_blank_end;
 
 	/* Interlace */
 	if (REG(OTG_INTERLACE_CONTROL)) {

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c

@@ -153,6 +153,7 @@ struct _vcs_dpi_ip_params_st dcn2_0_ip = {
 	.xfc_supported = true,
 	.xfc_fill_bw_overhead_percent = 10.0,
 	.xfc_fill_constant_bytes = 0,
+	.number_of_cursors = 1,
 };
 
 struct _vcs_dpi_ip_params_st dcn2_0_nv14_ip = {
@@ -220,7 +221,8 @@ struct _vcs_dpi_ip_params_st dcn2_0_nv14_ip = {
 	.xfc_supported = true,
 	.xfc_fill_bw_overhead_percent = 10.0,
 	.xfc_fill_constant_bytes = 0,
-	.ptoi_supported = 0
+	.ptoi_supported = 0,
+	.number_of_cursors = 1,
 };
 
 struct _vcs_dpi_soc_bounding_box_st dcn2_0_soc = {
@@ -2042,14 +2044,17 @@ int dcn20_populate_dml_pipes_from_context(
 		/* todo: default max for now, until there is logic reflecting this in dc*/
 		pipes[pipe_cnt].dout.output_bpc = 12;
 		/*
-		 * Use max cursor settings for calculations to minimize
+		 * For graphic plane, cursor number is 1, nv12 is 0
 		 * bw calculations due to cursor on/off
 		 */
-		pipes[pipe_cnt].pipe.src.num_cursors = 2;
+		if (res_ctx->pipe_ctx[i].plane_state &&
+				res_ctx->pipe_ctx[i].plane_state->address.type == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE)
+			pipes[pipe_cnt].pipe.src.num_cursors = 0;
+		else
+			pipes[pipe_cnt].pipe.src.num_cursors = dc->dml.ip.number_of_cursors;
+
 		pipes[pipe_cnt].pipe.src.cur0_src_width = 256;
 		pipes[pipe_cnt].pipe.src.cur0_bpp = dm_cur_32bit;
-		pipes[pipe_cnt].pipe.src.cur1_src_width = 256;
-		pipes[pipe_cnt].pipe.src.cur1_bpp = dm_cur_32bit;
 
 		if (!res_ctx->pipe_ctx[i].plane_state) {
 			pipes[pipe_cnt].pipe.src.is_hsplit = pipes[pipe_cnt].pipe.dest.odm_combine != dm_odm_combine_mode_disabled;

drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c

@@ -156,7 +156,8 @@ struct _vcs_dpi_ip_params_st dcn2_1_ip = {
 	.xfc_supported = false,
 	.xfc_fill_bw_overhead_percent = 10.0,
 	.xfc_fill_constant_bytes = 0,
-	.ptoi_supported = 0
+	.ptoi_supported = 0,
+	.number_of_cursors = 1,
 };
 
 struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {

drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h

@@ -204,6 +204,7 @@ struct _vcs_dpi_ip_params_st {
 	unsigned int LineBufferFixedBpp;
 	unsigned int can_vstartup_lines_exceed_vsync_plus_back_porch_lines_minus_one;
 	unsigned int bug_forcing_LC_req_same_size_fixed;
+	unsigned int number_of_cursors;
 };
 
 struct _vcs_dpi_display_xfc_params_st {