Commit 8f25a2f3 authored by Prarit Bhargava's avatar Prarit Bhargava Committed by Sasha Levin

PCI: Disable all BAR sizing for devices with non-compliant BARs

[ Upstream commit ad67b437 ]

b84106b4 ("PCI: Disable IO/MEM decoding for devices with non-compliant
BARs") disabled BAR sizing for BARs 0-5 of devices that don't comply with
the PCI spec.  But it didn't do anything for expansion ROM BARs, so we
still try to size them, resulting in warnings like this on Broadwell-EP:

  pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref]

Move the non-compliant BAR check from __pci_read_base() up to
pci_read_bases() so it applies to the expansion ROM BAR as well as
to BARs 0-5.

Note that direct callers of __pci_read_base(), like sriov_init(), will now
bypass this check.  We haven't had reports of devices with broken SR-IOV
BARs yet.

[bhelgaas: changelog]
Fixes: b84106b4 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs")
Signed-off-by: default avatarPrarit Bhargava <prarit@redhat.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andi Kleen <ak@linux.intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
parent a8716599
......@@ -176,9 +176,6 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
u16 orig_cmd;
struct pci_bus_region region, inverted_region;
if (dev->non_compliant_bars)
return 0;
mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
/* No printks while decoding is disabled! */
......@@ -319,6 +316,9 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
{
unsigned int pos, reg;
if (dev->non_compliant_bars)
return;
for (pos = 0; pos < howmany; pos++) {
struct resource *res = &dev->resource[pos];
reg = PCI_BASE_ADDRESS_0 + (pos << 2);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment