RISC-V: Canaan devicetree fixes

This series should rid us of dtbs_check errors for the RISC-V Canaan
k210 based boards. To make keeping it that way a little easier, I
changed the Canaan devicetree Makefile so that it would build all of the
devicetrees in the directory if SOC_CANAAN.

Link: https://lore.kernel.org/all/mhng-85044754-c361-40bc-a6a2-7082f35930bb@palmer-ri-x1c9/

* remotes/palmer/riscv-canaan_dt_schema:
  riscv: dts: canaan: build all devicetress if SOC_CANAAN
  riscv: dts: canaan: add specific compatible for kd233's LCD
  riscv: dts: canaan: fix bus {ranges,reg} warnings
  riscv: dts: canaan: remove spi-max-frequency from controllers
  riscv: dts: canaan: use custom compatible for k210 i2s
  riscv: dts: canaan: fix kd233 display spi frequency
  riscv: dts: canaan: fix mmc node names
  riscv: dts: canaan: fix the k210's timer nodes
  riscv: dts: canaan: fix the k210's memory node
  dt-bindings: memory-controllers: add canaan k210 sram controller
  dt-bindings: display: ili9341: document canaan kd233's lcd
  dt-bindings: display: convert ilitek,ili9341.txt to dt-schema

Documentation/devicetree/bindings/display/ilitek,ili9341.txt

-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};

Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

@@ -21,8 +21,10 @@ properties:
   compatible:
     items:
       - enum:
+          - adafruit,yx240qv29
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
       - const: ilitek,ili9341
 
   reg: true
@@ -47,31 +49,50 @@ properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
-  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         panel: display@0 {
-                 compatible = "st,sf-tc240t-9370-t",
-                              "ilitek,ili9341";
-                 reg = <0>;
-                 spi-3wire;
-                 spi-max-frequency = <10000000>;
-                 dc-gpios = <&gpiod 13 0>;
-                 port {
-                         panel_in: endpoint {
-                           remote-endpoint = <&display_out>;
-                      };
-                 };
-             };
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
         };
+    };
 ...

Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };

arch/riscv/boot/dts/canaan/Makefile

 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))
-obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
+dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb
+dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb
+
+obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))

arch/riscv/boot/dts/canaan/canaan_kd233.dts

@@ -127,10 +127,10 @@ &spi0 {
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 
 	panel@0 {
-		compatible = "ilitek,ili9341";
+		compatible = "canaan,kd233-tft", "ilitek,ili9341";
 		reg = <0>;
 		dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		spi-max-frequency = <15000000>;
+		spi-max-frequency = <10000000>;
 		status = "disabled";
 	};
 };
@@ -142,7 +142,7 @@ &spi1 {
 	cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/k210.dtsi

@@ -81,11 +81,13 @@ core1 {
 
 	sram: memory@80000000 {
 		device_type = "memory";
+		reg = <0x80000000 0x400000>, /* sram0 4 MiB */
+		      <0x80400000 0x200000>, /* sram1 2 MiB */
+		      <0x80600000 0x200000>; /* aisram 2 MiB */
+	};
+
+	sram_controller: memory-controller {
 		compatible = "canaan,k210-sram";
-		reg = <0x80000000 0x400000>,
-		      <0x80400000 0x200000>,
-		      <0x80600000 0x200000>;
-		reg-names = "sram0", "sram1", "aisram";
 		clocks = <&sysclk K210_CLK_SRAM0>,
 			 <&sysclk K210_CLK_SRAM1>,
 			 <&sysclk K210_CLK_AI>;
@@ -173,7 +175,7 @@ apb0: bus@50200000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-pm-bus";
-			ranges;
+			ranges = <0x50200000 0x50200000 0x200000>;
 			clocks = <&sysclk K210_CLK_APB0>;
 
 			gpio1: gpio@50200000 {
@@ -261,7 +263,7 @@ spi2: spi@50240000 {
 			};
 
 			i2s0: i2s@50250000 {
-				compatible = "snps,designware-i2s";
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
 				reg = <0x50250000 0x200>;
 				interrupts = <5>;
 				clocks = <&sysclk K210_CLK_I2S0>;
@@ -270,7 +272,7 @@ i2s0: i2s@50250000 {
 			};
 
 			i2s1: i2s@50260000 {
-				compatible = "snps,designware-i2s";
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
 				reg = <0x50260000 0x200>;
 				interrupts = <6>;
 				clocks = <&sysclk K210_CLK_I2S1>;
@@ -279,7 +281,7 @@ i2s1: i2s@50260000 {
 			};
 
 			i2s2: i2s@50270000 {
-				compatible = "snps,designware-i2s";
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
 				reg = <0x50270000 0x200>;
 				interrupts = <7>;
 				clocks = <&sysclk K210_CLK_I2S2>;
@@ -329,28 +331,58 @@ fpioa: pinmux@502b0000 {
 
 			timer0: timer@502d0000 {
 				compatible = "snps,dw-apb-timer";
-				reg = <0x502D0000 0x100>;
-				interrupts = <14>, <15>;
+				reg = <0x502D0000 0x14>;
+				interrupts = <14>;
 				clocks = <&sysclk K210_CLK_TIMER0>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
 				resets = <&sysrst K210_RST_TIMER0>;
 			};
 
-			timer1: timer@502e0000 {
+			timer1: timer@502d0014 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502D0014 0x14>;
+				interrupts = <15>;
+				clocks = <&sysclk K210_CLK_TIMER0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER0>;
+			};
+
+			timer2: timer@502e0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502E0000 0x14>;
+				interrupts = <16>;
+				clocks = <&sysclk K210_CLK_TIMER1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER1>;
+			};
+
+			timer3: timer@502e0014 {
 				compatible = "snps,dw-apb-timer";
-				reg = <0x502E0000 0x100>;
-				interrupts = <16>, <17>;
+				reg = <0x502E0014 0x114>;
+				interrupts = <17>;
 				clocks = <&sysclk K210_CLK_TIMER1>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
 				resets = <&sysrst K210_RST_TIMER1>;
 			};
 
-			timer2: timer@502f0000 {
+			timer4: timer@502f0000 {
 				compatible = "snps,dw-apb-timer";
-				reg = <0x502F0000 0x100>;
-				interrupts = <18>, <19>;
+				reg = <0x502F0000 0x14>;
+				interrupts = <18>;
+				clocks = <&sysclk K210_CLK_TIMER2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER2>;
+			};
+
+			timer5: timer@502f0014 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0014 0x14>;
+				interrupts = <19>;
 				clocks = <&sysclk K210_CLK_TIMER2>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -362,7 +394,7 @@ apb1: bus@50400000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-pm-bus";
-			ranges;
+			ranges = <0x50400000 0x50400000 0x40100>;
 			clocks = <&sysclk K210_CLK_APB1>;
 
 			wdt0: watchdog@50400000 {
@@ -417,7 +449,7 @@ apb2: bus@52000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-pm-bus";
-			ranges;
+			ranges = <0x52000000 0x52000000 0x2000200>;
 			clocks = <&sysclk K210_CLK_APB2>;
 
 			spi0: spi@52000000 {
@@ -431,7 +463,6 @@ spi0: spi@52000000 {
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI0>;
 				reset-names = "spi";
-				spi-max-frequency = <25000000>;
 				num-cs = <4>;
 				reg-io-width = <4>;
 			};
@@ -447,7 +478,6 @@ spi1: spi@53000000 {
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI1>;
 				reset-names = "spi";
-				spi-max-frequency = <25000000>;
 				num-cs = <4>;
 				reg-io-width = <4>;
 			};
@@ -463,8 +493,7 @@ spi3: spi@54000000 {
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI3>;
 				reset-names = "spi";
-				/* Could possibly go up to 200 MHz */
-				spi-max-frequency = <100000000>;
+
 				num-cs = <4>;
 				reg-io-width = <4>;
 			};

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

@@ -189,7 +189,7 @@ &spi1 {
 	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

@@ -191,7 +191,7 @@ &spi1 {
 	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

@@ -199,7 +199,7 @@ &spi1 {
 	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

@@ -164,7 +164,7 @@ &spi1 {
 	cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;