Commit 8fab174b authored by Robert Hancock's avatar Robert Hancock Committed by David S. Miller

net: macb: poll for fixed link state in SGMII mode

When using a fixed-link configuration with GEM in SGMII mode, such as
for a chip-to-chip interconnect, the link state was always showing as
established regardless of the actual connectivity state. We can monitor
the pcs_link_state bit in the Network Status register to determine
whether the PCS link state is actually up.
Signed-off-by: default avatarRobert Hancock <robert.hancock@calian.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c232f81b
......@@ -847,6 +847,15 @@ static int macb_phylink_connect(struct macb *bp)
return 0;
}
static void macb_get_pcs_fixed_state(struct phylink_config *config,
struct phylink_link_state *state)
{
struct net_device *ndev = to_net_dev(config->dev);
struct macb *bp = netdev_priv(ndev);
state->link = (macb_readl(bp, NSR) & MACB_BIT(NSR_LINK)) != 0;
}
/* based on au1000_eth. c*/
static int macb_mii_probe(struct net_device *dev)
{
......@@ -855,6 +864,11 @@ static int macb_mii_probe(struct net_device *dev)
bp->phylink_config.dev = &dev->dev;
bp->phylink_config.type = PHYLINK_NETDEV;
if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
bp->phylink_config.poll_fixed_state = true;
bp->phylink_config.get_fixed_state = macb_get_pcs_fixed_state;
}
bp->phylink = phylink_create(&bp->phylink_config, bp->pdev->dev.fwnode,
bp->phy_interface, &macb_phylink_ops);
if (IS_ERR(bp->phylink)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment