thermal/drivers/int340x/processor_thermal: Split enumeration and processing part

Remove enumeration part from the processor_thermal_device to two
different modules. One for ACPI and one for PCI:
	ACPI enumeration: int3401_thermal
	PCI part: processor_thermal_device_pci_legacy

The current processor_thermal_device now just implements interface
functions to be used by the ACPI and PCI enumeration module. This is
done by:
1. Make functions proc_thermal_add() and proc_thermal_remove() non static
and export them for usage in other processor_thermal_device_pci_legacy.c
and in int3401_thermal.c.

2. Move the sysfs file creation for TCC offset and power limit attribute
group to the proc_thermal_add() from the individual enumeration callbacks
for PCI and ACPI.

3. Create new interface functions proc_thermal_mmio_add() and
proc_thermal_mmio_remove() which will be called from the
processor_thermal_device_pci_legacy module.

4. Export proc_thermal_resume(), so that it can be used by power
management callbacks.

5. Remove special check for double enumeration as it never happens.

While here, fix some cleanup on error conditions in proc_thermal_add().

No functional changes are expected with this change.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210525204811.3793651-2-srinivas.pandruvada@linux.intel.com

drivers/thermal/intel/int340x_thermal/Makefile

@@ -4,6 +4,8 @@ obj-$(CONFIG_INT340X_THERMAL)	+= int340x_thermal_zone.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3402_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3403_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device.o
+obj-$(CONFIG_INT340X_THERMAL)	+= int3401_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device_pci_legacy.o
 obj-$(CONFIG_PROC_THERMAL_MMIO_RAPL) += processor_thermal_rapl.o
 obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_rfim.o
 obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_mbox.o

drivers/thermal/intel/int340x_thermal/int3401_thermal.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3401 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+
+static const struct acpi_device_id int3401_device_ids[] = {
+	{"INT3401", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static int int3401_add(struct platform_device *pdev)
+{
+	struct proc_thermal_device *proc_priv;
+	int ret;
+
+	proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+	if (!proc_priv)
+		return -ENOMEM;
+
+	ret = proc_thermal_add(&pdev->dev, proc_priv);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, proc_priv);
+
+	return ret;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+	proc_thermal_remove(platform_get_drvdata(pdev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int int3401_thermal_resume(struct device *dev)
+{
+	return proc_thermal_resume(dev);
+}
+#else
+#define int3401_thermal_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(int3401_proc_thermal_pm, NULL, int3401_thermal_resume);
+
+static struct platform_driver int3401_driver = {
+	.probe = int3401_add,
+	.remove = int3401_remove,
+	.driver = {
+		.name = "int3401 thermal",
+		.acpi_match_table = int3401_device_ids,
+		.pm = &int3401_proc_thermal_pm,
+	},
+};
+
+static int __init proc_thermal_init(void)
+{
+	return platform_driver_register(&int3401_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+	platform_driver_unregister(&int3401_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");

drivers/thermal/intel/int340x_thermal/processor_thermal_device.h

@@ -80,5 +80,11 @@ int proc_thermal_mbox_add(struct pci_dev *pdev, struct proc_thermal_device *proc
 void proc_thermal_mbox_remove(struct pci_dev *pdev);
 
 int processor_thermal_send_mbox_cmd(struct pci_dev *pdev, u16 cmd_id, u32 cmd_data, u32 *cmd_resp);
-
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *priv);
+void proc_thermal_remove(struct proc_thermal_device *proc_priv);
+int proc_thermal_resume(struct device *dev);
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+			  struct proc_thermal_device *proc_priv,
+			  kernel_ulong_t feature_mask);
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
 #endif

drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * B0D4 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+#include "../intel_soc_dts_iosf.h"
+
+#define DRV_NAME "proc_thermal"
+
+static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
+{
+	struct proc_thermal_device *proc_priv;
+	struct pci_dev *pdev = devid;
+
+	proc_priv = pci_get_drvdata(pdev);
+
+	intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
+
+	return IRQ_HANDLED;
+}
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	struct proc_thermal_device *proc_priv;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "error: could not enable device\n");
+		return ret;
+	}
+
+	proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+	if (!proc_priv)
+		return -ENOMEM;
+
+	ret = proc_thermal_add(&pdev->dev, proc_priv);
+	if (ret)
+		return ret;
+
+	pci_set_drvdata(pdev, proc_priv);
+
+	if (pdev->device == PCI_DEVICE_ID_INTEL_BSW_THERMAL) {
+		/*
+		 * Enumerate additional DTS sensors available via IOSF.
+		 * But we are not treating as a failure condition, if
+		 * there are no aux DTSs enabled or fails. This driver
+		 * already exposes sensors, which can be accessed via
+		 * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
+		 */
+		proc_priv->soc_dts = intel_soc_dts_iosf_init(
+					INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
+
+		if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
+			ret = pci_enable_msi(pdev);
+			if (!ret) {
+				ret = request_threaded_irq(pdev->irq, NULL,
+						proc_thermal_pci_msi_irq,
+						IRQF_ONESHOT, "proc_thermal",
+						pdev);
+				if (ret) {
+					intel_soc_dts_iosf_exit(
+							proc_priv->soc_dts);
+					pci_disable_msi(pdev);
+					proc_priv->soc_dts = NULL;
+				}
+			}
+		} else
+			dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
+	} else {
+
+	}
+
+	ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
+	if (ret) {
+		proc_thermal_remove(proc_priv);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+	struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+
+	if (proc_priv->soc_dts) {
+		intel_soc_dts_iosf_exit(proc_priv->soc_dts);
+		if (pdev->irq) {
+			free_irq(pdev->irq, pdev);
+			pci_disable_msi(pdev);
+		}
+	}
+
+	proc_thermal_mmio_remove(pdev, proc_priv);
+	proc_thermal_remove(proc_priv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_resume(struct device *dev)
+{
+	return proc_thermal_resume(dev);
+}
+#else
+#define proc_thermal_pci_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, NULL, proc_thermal_pci_resume);
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+	{ PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
+	{ PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BSW_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXT0_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXT1_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXTX_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, BXTP_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, CNL_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, CFL_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, GLK_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, HSB_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, ICL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+	{ PCI_DEVICE_DATA(INTEL, JSL_THERMAL, 0) },
+	{ PCI_DEVICE_DATA(INTEL, SKL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+	{ PCI_DEVICE_DATA(INTEL, TGL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_MBOX) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+	.name		= DRV_NAME,
+	.probe		= proc_thermal_pci_probe,
+	.remove		= proc_thermal_pci_remove,
+	.id_table	= proc_thermal_pci_ids,
+	.driver.pm	= &proc_thermal_pci_pm,
+};
+
+static int __init proc_thermal_init(void)
+{
+	return pci_register_driver(&proc_thermal_pci_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+	pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");