libata: apply behavioral quirks to sil3826 PMP

Fixing support for the Silicon Image 3826 port multiplier, by applying
to it the same quirks applied to the Silicon Image 3726.  Specifically
fixes the repeated timeout/reset process which previously afflicted
the 3726, as described from line 290.  Slightly based on notes from:

https://bugzilla.redhat.com/show_bug.cgi?id=890237Signed-off-by: Terry Suereth <terry.suereth@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

drivers/ata/libata-pmp.c

@@ -289,24 +289,24 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
 
 	/* Disable sending Early R_OK.
 	 * With "cached read" HDD testing and multiple ports busy on a SATA
-	 * host controller, 3726 PMP will very rarely drop a deferred
+	 * host controller, 3x26 PMP will very rarely drop a deferred
 	 * R_OK that was intended for the host. Symptom will be all
 	 * 5 drives under test will timeout, get reset, and recover.
 	 */
-	if (vendor == 0x1095 && devid == 0x3726) {
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
 		u32 reg;
 
 		err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to read Sil3726 Private Register";
+			reason = "failed to read Sil3x26 Private Register";
 			goto fail;
 		}
 		reg &= ~0x1;
 		err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to write Sil3726 Private Register";
+			reason = "failed to write Sil3x26 Private Register";
 			goto fail;
 		}
 	}
@@ -383,8 +383,8 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	u16 devid = sata_pmp_gscr_devid(gscr);
 	struct ata_link *link;
 
-	if (vendor == 0x1095 && devid == 0x3726) {
-		/* sil3726 quirks */
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
+		/* sil3x26 quirks */
 		ata_for_each_link(link, ap, EDGE) {
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;