Merge tag 'usb-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 5.19-rc3

  They include:

   - new usb-serial driver device ids

   - usb gadget driver fixes for reported problems

   - cdnsp driver fix

   - dwc3 driver fixes for reported problems

   - dwc3 driver fix for merge problem that I caused in 5.18

   - xhci driver fixes

   - dwc2 memory leak fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: change ep->ep safe in ffs_epfile_io()
  usb: gadget: f_fs: change ep->status safe in ffs_epfile_io()
  xhci: Fix null pointer dereference in resume if xhci has only one roothub
  USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  usb: cdnsp: Fixed setting last_trb incorrectly
  usb: gadget: u_ether: fix regression in setting fixed MAC address
  usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
  usb: dwc2: Fix memory leak in dwc2_hcd_init
  usb: dwc3: pci: Restore line lost in merge conflict resolution
  usb: dwc3: gadget: Fix IN endpoint max packet size allocation
  USB: serial: option: add support for Cinterion MV31 with new baseline
  USB: serial: io_ti: add Agilent E5805A support

drivers/usb/cdns3/cdnsp-ring.c

@@ -1941,13 +1941,16 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
 		}
 
 		if (enqd_len + trb_buff_len >= full_len) {
-			if (need_zero_pkt)
-				zero_len_trb = !zero_len_trb;
-
-			field &= ~TRB_CHAIN;
-			field |= TRB_IOC;
-			more_trbs_coming = false;
-			preq->td.last_trb = ring->enqueue;
+			if (need_zero_pkt && !zero_len_trb) {
+				zero_len_trb = true;
+			} else {
+				zero_len_trb = false;
+				field &= ~TRB_CHAIN;
+				field |= TRB_IOC;
+				more_trbs_coming = false;
+				need_zero_pkt = false;
+				preq->td.last_trb = ring->enqueue;
+			}
 		}
 
 		/* Only set interrupt on short packet for OUT endpoints. */
@@ -1962,7 +1965,7 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
 		length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) |
 			TRB_INTR_TARGET(0);
 
-		cdnsp_queue_trb(pdev, ring, more_trbs_coming | zero_len_trb,
+		cdnsp_queue_trb(pdev, ring, more_trbs_coming,
 				lower_32_bits(send_addr),
 				upper_32_bits(send_addr),
 				length_field,

drivers/usb/dwc2/hcd.c

@@ -5190,7 +5190,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		retval = -EINVAL;
-		goto error1;
+		goto error2;
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);

drivers/usb/dwc3/core.c

@@ -1644,13 +1644,8 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	 * This device property is for kernel internal use only and
 	 * is expected to be set by the glue code.
 	 */
-	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
-		edev = extcon_get_extcon_dev(name);
-		if (!edev)
-			return ERR_PTR(-EPROBE_DEFER);
-
-		return edev;
-	}
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
 
 	/*
 	 * Try to get an extcon device from the USB PHY controller's "port"

drivers/usb/dwc3/dwc3-pci.c

@@ -127,6 +127,7 @@ static const struct property_entry dwc3_pci_intel_phy_charger_detect_properties[
 	PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
 	PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
 	PROPERTY_ENTRY_BOOL("linux,phy_charger_detect"),
+	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 	{}
 };
 

drivers/usb/dwc3/gadget.c

@@ -2976,6 +2976,7 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 	struct dwc3 *dwc = dep->dwc;
 	u32 mdwidth;
 	int size;
+	int maxpacket;
 
 	mdwidth = dwc3_mdwidth(dwc);
 
@@ -2988,21 +2989,24 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 	else
 		size = DWC31_GTXFIFOSIZ_TXFDEP(size);
 
-	/* FIFO Depth is in MDWDITH bytes. Multiply */
-	size *= mdwidth;
-
 	/*
-	 * To meet performance requirement, a minimum TxFIFO size of 3x
-	 * MaxPacketSize is recommended for endpoints that support burst and a
-	 * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
-	 * support burst. Use those numbers and we can calculate the max packet
-	 * limit as below.
+	 * maxpacket size is determined as part of the following, after assuming
+	 * a mult value of one maxpacket:
+	 * DWC3 revision 280A and prior:
+	 * fifo_size = mult * (max_packet / mdwidth) + 1;
+	 * maxpacket = mdwidth * (fifo_size - 1);
+	 *
+	 * DWC3 revision 290A and onwards:
+	 * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
+	 * maxpacket = mdwidth * ((fifo_size - 1) - 1) - mdwidth;
 	 */
-	if (dwc->maximum_speed >= USB_SPEED_SUPER)
-		size /= 3;
+	if (DWC3_VER_IS_PRIOR(DWC3, 290A))
+		maxpacket = mdwidth * (size - 1);
 	else
-		size /= 2;
+		maxpacket = mdwidth * ((size - 1) - 1) - mdwidth;
 
+	/* Functionally, space for one max packet is sufficient */
+	size = min_t(int, maxpacket, 1024);
 	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 
 	dep->endpoint.max_streams = 16;

drivers/usb/gadget/function/f_fs.c

@@ -122,8 +122,6 @@ struct ffs_ep {
 	struct usb_endpoint_descriptor	*descs[3];
 
 	u8				num;
-
-	int				status;	/* P: epfile->mutex */
 };
 
 struct ffs_epfile {
@@ -227,6 +225,9 @@ struct ffs_io_data {
 	bool use_sg;
 
 	struct ffs_data *ffs;
+
+	int status;
+	struct completion done;
 };
 
 struct ffs_desc_helper {
@@ -707,12 +708,15 @@ static const struct file_operations ffs_ep0_operations = {
 
 static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 {
+	struct ffs_io_data *io_data = req->context;
+
 	ENTER();
-	if (req->context) {
-		struct ffs_ep *ep = _ep->driver_data;
-		ep->status = req->status ? req->status : req->actual;
-		complete(req->context);
-	}
+	if (req->status)
+		io_data->status = req->status;
+	else
+		io_data->status = req->actual;
+
+	complete(&io_data->done);
 }
 
 static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter)
@@ -1050,7 +1054,6 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		WARN(1, "%s: data_len == -EINVAL\n", __func__);
 		ret = -EINVAL;
 	} else if (!io_data->aio) {
-		DECLARE_COMPLETION_ONSTACK(done);
 		bool interrupted = false;
 
 		req = ep->req;
@@ -1066,7 +1069,8 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 
 		io_data->buf = data;
 
-		req->context  = &done;
+		init_completion(&io_data->done);
+		req->context  = io_data;
 		req->complete = ffs_epfile_io_complete;
 
 		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
@@ -1075,7 +1079,12 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 
 		spin_unlock_irq(&epfile->ffs->eps_lock);
 
-		if (wait_for_completion_interruptible(&done)) {
+		if (wait_for_completion_interruptible(&io_data->done)) {
+			spin_lock_irq(&epfile->ffs->eps_lock);
+			if (epfile->ep != ep) {
+				ret = -ESHUTDOWN;
+				goto error_lock;
+			}
 			/*
 			 * To avoid race condition with ffs_epfile_io_complete,
 			 * dequeue the request first then check
@@ -1083,17 +1092,18 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 			 * condition with req->complete callback.
 			 */
 			usb_ep_dequeue(ep->ep, req);
-			wait_for_completion(&done);
-			interrupted = ep->status < 0;
+			spin_unlock_irq(&epfile->ffs->eps_lock);
+			wait_for_completion(&io_data->done);
+			interrupted = io_data->status < 0;
 		}
 
 		if (interrupted)
 			ret = -EINTR;
-		else if (io_data->read && ep->status > 0)
-			ret = __ffs_epfile_read_data(epfile, data, ep->status,
+		else if (io_data->read && io_data->status > 0)
+			ret = __ffs_epfile_read_data(epfile, data, io_data->status,
 						     &io_data->data);
 		else
-			ret = ep->status;
+			ret = io_data->status;
 		goto error_mutex;
 	} else if (!(req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC))) {
 		ret = -ENOMEM;

drivers/usb/gadget/function/u_ether.c

@@ -775,9 +775,13 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 	dev->qmult = qmult;
 	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
 
-	if (get_ether_addr(dev_addr, addr))
+	if (get_ether_addr(dev_addr, addr)) {
+		net->addr_assign_type = NET_ADDR_RANDOM;
 		dev_warn(&g->dev,
 			"using random %s ethernet address\n", "self");
+	} else {
+		net->addr_assign_type = NET_ADDR_SET;
+	}
 	eth_hw_addr_set(net, addr);
 	if (get_ether_addr(host_addr, dev->host_mac))
 		dev_warn(&g->dev,
@@ -844,6 +848,10 @@ struct net_device *gether_setup_name_default(const char *netname)
 
 	eth_random_addr(dev->dev_mac);
 	pr_warn("using random %s ethernet address\n", "self");
+
+	/* by default we always have a random MAC address */
+	net->addr_assign_type = NET_ADDR_RANDOM;
+
 	eth_random_addr(dev->host_mac);
 	pr_warn("using random %s ethernet address\n", "host");
 
@@ -871,7 +879,6 @@ int gether_register_netdev(struct net_device *net)
 	dev = netdev_priv(net);
 	g = dev->gadget;
 
-	net->addr_assign_type = NET_ADDR_RANDOM;
 	eth_hw_addr_set(net, dev->dev_mac);
 
 	status = register_netdev(net);
@@ -912,6 +919,7 @@ int gether_set_dev_addr(struct net_device *net, const char *dev_addr)
 	if (get_ether_addr(dev_addr, new_addr))
 		return -EINVAL;
 	memcpy(dev->dev_mac, new_addr, ETH_ALEN);
+	net->addr_assign_type = NET_ADDR_SET;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gether_set_dev_addr);

drivers/usb/gadget/udc/lpc32xx_udc.c

@@ -3016,6 +3016,7 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 	}
 
 	udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
+	of_node_put(isp1301_node);
 	if (!udc->isp1301_i2c_client) {
 		return -EPROBE_DEFER;
 	}

drivers/usb/host/xhci.c

@@ -1107,7 +1107,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 {
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
-	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
 	bool			comp_timer_running = false;
 	bool			pending_portevent = false;
@@ -1214,23 +1213,19 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		 * first with the primary HCD, and then with the secondary HCD.
 		 * If we don't do the same, the host will never be started.
 		 */
-		if (!usb_hcd_is_primary_hcd(hcd))
-			secondary_hcd = hcd;
-		else
-			secondary_hcd = xhci->shared_hcd;
-
 		xhci_dbg(xhci, "Initialize the xhci_hcd\n");
-		retval = xhci_init(hcd->primary_hcd);
+		retval = xhci_init(hcd);
 		if (retval)
 			return retval;
 		comp_timer_running = true;
 
 		xhci_dbg(xhci, "Start the primary HCD\n");
-		retval = xhci_run(hcd->primary_hcd);
-		if (!retval && secondary_hcd) {
+		retval = xhci_run(hcd);
+		if (!retval && xhci->shared_hcd) {
 			xhci_dbg(xhci, "Start the secondary HCD\n");
-			retval = xhci_run(secondary_hcd);
+			retval = xhci_run(xhci->shared_hcd);
 		}
+
 		hcd->state = HC_STATE_SUSPENDED;
 		if (xhci->shared_hcd)
 			xhci->shared_hcd->state = HC_STATE_SUSPENDED;

drivers/usb/serial/io_ti.c

@@ -166,6 +166,7 @@ static const struct usb_device_id edgeport_2port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
 	{ }
 };
 
@@ -204,6 +205,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
 	{ }
 };
 

drivers/usb/serial/io_usbvend.h

@@ -212,6 +212,7 @@
 //
 // Definitions for other product IDs
 #define ION_DEVICE_ID_MT4X56USB			0x1403	// OEM device
+#define ION_DEVICE_ID_E5805A			0x1A01  // OEM device (rebranded Edgeport/4)
 
 
 #define	GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId)				\

drivers/usb/serial/option.c

@@ -432,6 +432,8 @@ static void option_instat_callback(struct urb *urb);
 #define CINTERION_PRODUCT_CLS8			0x00b0
 #define CINTERION_PRODUCT_MV31_MBIM		0x00b3
 #define CINTERION_PRODUCT_MV31_RMNET		0x00b7
+#define CINTERION_PRODUCT_MV31_2_MBIM		0x00b8
+#define CINTERION_PRODUCT_MV31_2_RMNET		0x00b9
 #define CINTERION_PRODUCT_MV32_WA		0x00f1
 #define CINTERION_PRODUCT_MV32_WB		0x00f2
 
@@ -1979,6 +1981,10 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
 	  .driver_info = RSVD(0)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_2_MBIM, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_2_RMNET, 0xff),
+	  .driver_info = RSVD(0)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
 	  .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),