Merge tag 'imx-cleanup-4.9' of...

Merge tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/cleanup

Pull "i.MX cleanup for 4.9" from Shawn Guo:

 - Drop i.MX1 board files and make i.MX1 a DT only platform.
 - Remove obsolete ENET initialization code for TX28 board, since FEC
   driver handles those setup well now.
 - A couple of cleanups on i.MX31 IOMUX headers to drop duplications
 - A few other random and trivial cleanups

* tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: (trivial) fix typo and grammar
  ARM: imx: use IS_ENABLED() instead of checking for built-in or module
  ARM: imx: remove platform-mxc_rnga
  ARM: imx: no need to select SMP_ON_UP explicitly
  ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
  ARM: i.MX: Remove i.MX1 non-DT support
  ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
  ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
  ARM: mxs: remove obsolete startup code for TX28
  ARM: i.MX31 iomux: remove duplicates with alternate name
  ARM: i.MX31 iomux: remove plain duplicates

arch/arm/configs/imx_v4_v5_defconfig

@@ -22,14 +22,13 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y

arch/arm/configs/multi_v4t_defconfig

@@ -20,9 +20,7 @@ CONFIG_INTEGRATOR_CM720T=y
 CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MACH_IMX1_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set

arch/arm/mach-imx/Kconfig

@@ -64,13 +64,6 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config SOC_IMX1
-	bool
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-	select PINCTRL_IMX1
-
 config SOC_IMX21
 	bool
 	select CPU_ARM926T
@@ -88,7 +81,6 @@ config SOC_IMX31
 	bool
 	select CPU_V6
 	select MXC_AVIC
-	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -96,35 +88,6 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select MXC_AVIC
 	select PINCTRL_IMX35
-	select SMP_ON_UP if SMP
-
-if ARCH_MULTI_V4T
-
-comment "MX1 platforms:"
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-config MACH_APF9328
-	bool "APF9328"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Yes here if you are using the Armadeus APF9328 development board
-
-config MACH_IMX1_DT
-	bool "Support i.MX1 platforms from device tree"
-	select SOC_IMX1
-	help
-	  Include support for Freescale i.MX1 based platforms
-	  using the device tree for discovery.
-
-endif
 
 if ARCH_MULTI_V5
 
@@ -461,6 +424,18 @@ endif
 
 comment "Device tree only"
 
+if ARCH_MULTI_V4T
+
+config SOC_IMX1
+	bool "i.MX1 support"
+	select CPU_ARM920T
+	select MXC_AVIC
+	select PINCTRL_IMX1
+	help
+	  This enables support for Freescale i.MX1 processor
+
+endif
+
 if ARCH_MULTI_V5
 
 config SOC_IMX25
@@ -585,7 +560,6 @@ config SOC_VF610
 	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select SMP_ON_UP if SMP
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.

arch/arm/mach-imx/Makefile

 obj-y := cpu.o system.o irq-common.o
 
-obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
 
 obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
@@ -35,11 +34,6 @@ obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
 
-# i.MX1 based machines
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
-obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
-
 # i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
@@ -93,6 +87,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
+obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o

arch/arm/mach-imx/common.h

@@ -21,29 +21,24 @@ struct device_node;
 enum mxc_cpu_pwr_mode;
 struct of_device_id;
 
-void mx1_map_io(void);
 void mx21_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
-void imx1_init_early(void);
 void imx21_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
-void imx1_soc_init(void);
 void imx21_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
 void epit_timer_init(void __iomem *base, int irq);
-int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);

arch/arm/mach-imx/devices-imx1.h

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_fb_data imx1_imx_fb_data;
-#define imx1_add_imx_fb(pdata) \
-    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
-#define imx1_add_imx_i2c(pdata)		\
-	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
-#define imx1_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
-#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
-#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
-
-extern const struct imx_spi_imx_data imx1_cspi_data[];
-#define imx1_add_cspi(id, pdata)   \
-	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
-
-#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
-#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)

arch/arm/mach-imx/devices/Makefile

@@ -20,7 +20,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o

arch/arm/mach-imx/devices/devices-common.h

@@ -154,18 +154,6 @@ struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_ssi_platform_data *pdata);
 
 #include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_3irq_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irqrx;
-	resource_size_t irqtx;
-	resource_size_t irqrts;
-};
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata);
-
 struct imx_imx_uart_1irq_data {
 	int id;
 	resource_size_t iobase;

arch/arm/mach-imx/devices/platform-imx-fb.c

@@ -19,11 +19,6 @@
 		.irq = soc ## _INT_LCDC,				\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);

arch/arm/mach-imx/devices/platform-imx-i2c.c

@@ -21,11 +21,6 @@
 #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
 	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
 	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);

arch/arm/mach-imx/devices/platform-imx-uart.c

@@ -27,15 +27,6 @@
 		.irq = soc ## _INT_UART ## _hwid,			\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
-#define imx1_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
-	imx1_imx_uart_data_entry(0, 1),
-	imx1_imx_uart_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
 #define imx21_imx_uart_data_entry(_id, _hwid)				\
@@ -82,34 +73,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqrx,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqtx,
-			.end = data->irqtx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqrts,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx1-uart", data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
-
 struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata)

arch/arm/mach-imx/devices/platform-spi_imx.c

@@ -21,15 +21,6 @@
 #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
 	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
-#define imx1_cspi_data_entry(_id, _hwid) \
-	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
-	imx1_cspi_data_entry(0, 1),
-	imx1_cspi_data_entry(1, 2),
-};
-#endif
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 #define imx21_cspi_data_entry(_id, _hwid)                            \

arch/arm/mach-imx/hardware.h

@@ -112,7 +112,6 @@
 #include "mx2x.h"
 #include "mx21.h"
 #include "mx27.h"
-#include "mx1.h"
 
 #define imx_map_entry(soc, name, _type)	{				\
 	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
@@ -121,7 +120,7 @@
 	.type = _type,							\
 }
 
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* There's an off-by-one between the gpio bank number and the gpiochip */
 /* range e.g. GPIO_1_5 is gpio 5 under linux */
 #define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
 

arch/arm/mach-imx/iomux-mx1.h

-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX1_H__
-#define __MACH_IOMUX_MX1_H__
-
-#include "iomux-v1.h"
-
-#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
-
-#endif /* ifndef __MACH_IOMUX_MX1_H__ */

arch/arm/mach-imx/iomux-mx3.h

@@ -598,10 +598,7 @@ enum iomux_pins {
 #define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
@@ -665,37 +662,6 @@ enum iomux_pins {
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)

arch/arm/mach-imx/mach-apf9328.c

-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int apf9328_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &apf9328_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
-	.flags          = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
-	{
-		.start  = MX1_CS4_PHYS + 0x00C00000,
-		.end    = MX1_CS4_PHYS + 0x00C00001,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CS4_PHYS + 0x00C00002,
-		.end    = MX1_CS4_PHYS + 0x00C00003,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		/* irq number is run-time assigned */
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &dm9000_setup,
-	}
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&apf9328_flash_device,
-	&dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(apf9328_pins,
-			ARRAY_SIZE(apf9328_pins),
-			"APF9328");
-
-	imx1_add_imx_uart0(NULL);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	imx1_add_imx_i2c(&apf9328_i2c_data);
-
-	dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
-	mx1_clocks_init(32768);
-}
-
-MACHINE_START(APF9328, "Armadeus APF9328")
-	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
-	.map_io       = mx1_map_io,
-	.init_early   = imx1_init_early,
-	.init_irq     = mx1_init_irq,
-	.init_time	= apf9328_timer_init,
-	.init_machine = apf9328_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/imx1-dt.c → arch/arm/mach-imx/mach-imx1.c

@@ -9,8 +9,27 @@
 
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
 #include "common.h"
+#include "hardware.h"
+
+#define MX1_AVIC_ADDR	0x00223000
+
+static void __init imx1_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+}
+
+static void __init imx1_init_irq(void)
+{
+	void __iomem *avic_addr;
+
+	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
+	WARN_ON(!avic_addr);
+
+	mxc_init_irq(avic_addr);
+}
 
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
@@ -18,9 +37,9 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
-	.map_io		= mx1_map_io,
+	.map_io		= debug_ll_io_init,
 	.init_early	= imx1_init_early,
-	.init_irq	= mx1_init_irq,
+	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -63,7 +63,7 @@
  */
 #define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
@@ -141,7 +141,7 @@ static inline int kzm_init_ext_uart(void)
 /*
  * SMSC LAN9118
  */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 static struct smsc911x_platform_config kzm_smsc9118_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
@@ -201,7 +201,7 @@ static inline int kzm_init_smsc9118(void)
 }
 #endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_IMX)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };

arch/arm/mach-imx/mach-pcm037.c

@@ -149,7 +149,7 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CONTRAST__CONTRAST,
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
+	MX31_PIN_LCS0__GPIO3_23,
 	/* CSI */
 	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
 	MX31_PIN_CSI_D6__CSI_D6,

arch/arm/mach-imx/mach-scb9328.c

-/*
- * linux/arch/arm/mach-mx1/mach-scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device scb_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &scb_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
-	{
-		.name	= "address area",
-		.start	= MX1_CS5_PHYS,
-		.end	= MX1_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM,	/* address access */
-	}, {
-		.name	= "data area",
-		.start	= MX1_CS5_PHYS + 4,
-		.end	= MX1_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM,	/* data access */
-	}, {
-		/* irq number is run-time assigned */
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000x_resources),
-	.resource	= dm9000x_resources,
-	.dev		= {
-		.platform_data = &dm9000_platdata,
-	}
-};
-
-static const int mxc_uart1_pins[] = {
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&scb_flash_device,
-	&dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-
-	imx1_add_imx_uart0(&uart_pdata);
-
-	printk(KERN_INFO"Scb9328: Adding devices\n");
-	dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
-	/* Sascha Hauer */
-	.atag_offset = 100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= scb9328_timer_init,
-	.init_machine = scb9328_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/mm-imx1.c

-/*
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX1 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static struct map_desc imx_io_desc[] __initdata = {
-	imx_map_entry(MX1, IO, MT_DEVICE),
-};
-
-void __init mx1_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-void __init imx1_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-			MX1_NUM_GPIO_PORT);
-}
-
-void __init mx1_init_irq(void)
-{
-	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-}
-
-void __init imx1_soc_init(void)
-{
-	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
-	mxc_device_init();
-
-	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTA, 0);
-	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTB, 0);
-	mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTC, 0);
-	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTD, 0);
-	imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR,
-			MX1_DMA_INT, MX1_DMA_ERR);
-	pinctrl_provide_dummies();
-}

arch/arm/mach-imx/mx1.h

-/*
- * Copyright (C) 1997,1998 Russell King
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MX1_H__
-#define __MACH_MX1_H__
-
-/*
- * Memory map
- */
-#define MX1_IO_BASE_ADDR	0x00200000
-#define MX1_IO_SIZE		SZ_1M
-
-#define MX1_CS0_PHYS		0x10000000
-#define MX1_CS0_SIZE		0x02000000
-
-#define MX1_CS1_PHYS		0x12000000
-#define MX1_CS1_SIZE		0x01000000
-
-#define MX1_CS2_PHYS		0x13000000
-#define MX1_CS2_SIZE		0x01000000
-
-#define MX1_CS3_PHYS		0x14000000
-#define MX1_CS3_SIZE		0x01000000
-
-#define MX1_CS4_PHYS		0x15000000
-#define MX1_CS4_SIZE		0x01000000
-
-#define MX1_CS5_PHYS		0x16000000
-#define MX1_CS5_SIZE		0x01000000
-
-/*
- *  Register BASEs, based on OFFSETs
- */
-#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
-#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
-#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
-#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
-#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
-#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
-#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
-#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
-#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
-#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
-#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
-#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
-#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
-#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
-#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
-#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
-#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
-#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
-#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO1_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO2_BASE_ADDR		(0x1C100 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO3_BASE_ADDR		(0x1C200 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO4_BASE_ADDR		(0x1C300 + MX1_IO_BASE_ADDR)
-#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
-#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
-#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
-#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
-#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
-
-/* macro to get at IO space when running virtually */
-#define MX1_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX1_IO_ADDRESS(x)		IOMEM(MX1_IO_P2V(x))
-
-/* fixed interrput numbers */
-#include <asm/irq.h>
-#define MX1_INT_SOFTINT		(NR_IRQS_LEGACY + 0)
-#define MX1_INT_CSI		(NR_IRQS_LEGACY + 6)
-#define MX1_DSPA_MAC_INT	(NR_IRQS_LEGACY + 7)
-#define MX1_DSPA_INT		(NR_IRQS_LEGACY + 8)
-#define MX1_COMP_INT		(NR_IRQS_LEGACY + 9)
-#define MX1_MSHC_XINT		(NR_IRQS_LEGACY + 10)
-#define MX1_GPIO_INT_PORTA	(NR_IRQS_LEGACY + 11)
-#define MX1_GPIO_INT_PORTB	(NR_IRQS_LEGACY + 12)
-#define MX1_GPIO_INT_PORTC	(NR_IRQS_LEGACY + 13)
-#define MX1_INT_LCDC		(NR_IRQS_LEGACY + 14)
-#define MX1_SIM_INT		(NR_IRQS_LEGACY + 15)
-#define MX1_SIM_DATA_INT	(NR_IRQS_LEGACY + 16)
-#define MX1_RTC_INT		(NR_IRQS_LEGACY + 17)
-#define MX1_RTC_SAMINT		(NR_IRQS_LEGACY + 18)
-#define MX1_INT_UART2PFERR	(NR_IRQS_LEGACY + 19)
-#define MX1_INT_UART2RTS	(NR_IRQS_LEGACY + 20)
-#define MX1_INT_UART2DTR	(NR_IRQS_LEGACY + 21)
-#define MX1_INT_UART2UARTC	(NR_IRQS_LEGACY + 22)
-#define MX1_INT_UART2TX		(NR_IRQS_LEGACY + 23)
-#define MX1_INT_UART2RX		(NR_IRQS_LEGACY + 24)
-#define MX1_INT_UART1PFERR	(NR_IRQS_LEGACY + 25)
-#define MX1_INT_UART1RTS	(NR_IRQS_LEGACY + 26)
-#define MX1_INT_UART1DTR	(NR_IRQS_LEGACY + 27)
-#define MX1_INT_UART1UARTC	(NR_IRQS_LEGACY + 28)
-#define MX1_INT_UART1TX		(NR_IRQS_LEGACY + 29)
-#define MX1_INT_UART1RX		(NR_IRQS_LEGACY + 30)
-#define MX1_VOICE_DAC_INT	(NR_IRQS_LEGACY + 31)
-#define MX1_VOICE_ADC_INT	(NR_IRQS_LEGACY + 32)
-#define MX1_PEN_DATA_INT	(NR_IRQS_LEGACY + 33)
-#define MX1_PWM_INT		(NR_IRQS_LEGACY + 34)
-#define MX1_SDHC_INT		(NR_IRQS_LEGACY + 35)
-#define MX1_INT_I2C		(NR_IRQS_LEGACY + 39)
-#define MX1_INT_CSPI2		(NR_IRQS_LEGACY + 40)
-#define MX1_INT_CSPI1		(NR_IRQS_LEGACY + 41)
-#define MX1_SSI_TX_INT		(NR_IRQS_LEGACY + 42)
-#define MX1_SSI_TX_ERR_INT	(NR_IRQS_LEGACY + 43)
-#define MX1_SSI_RX_INT		(NR_IRQS_LEGACY + 44)
-#define MX1_SSI_RX_ERR_INT	(NR_IRQS_LEGACY + 45)
-#define MX1_TOUCH_INT		(NR_IRQS_LEGACY + 46)
-#define MX1_INT_USBD0		(NR_IRQS_LEGACY + 47)
-#define MX1_INT_USBD1		(NR_IRQS_LEGACY + 48)
-#define MX1_INT_USBD2		(NR_IRQS_LEGACY + 49)
-#define MX1_INT_USBD3		(NR_IRQS_LEGACY + 50)
-#define MX1_INT_USBD4		(NR_IRQS_LEGACY + 51)
-#define MX1_INT_USBD5		(NR_IRQS_LEGACY + 52)
-#define MX1_INT_USBD6		(NR_IRQS_LEGACY + 53)
-#define MX1_BTSYS_INT		(NR_IRQS_LEGACY + 55)
-#define MX1_BTTIM_INT		(NR_IRQS_LEGACY + 56)
-#define MX1_BTWUI_INT		(NR_IRQS_LEGACY + 57)
-#define MX1_TIM2_INT		(NR_IRQS_LEGACY + 58)
-#define MX1_TIM1_INT		(NR_IRQS_LEGACY + 59)
-#define MX1_DMA_ERR		(NR_IRQS_LEGACY + 60)
-#define MX1_DMA_INT		(NR_IRQS_LEGACY + 61)
-#define MX1_GPIO_INT_PORTD	(NR_IRQS_LEGACY + 62)
-#define MX1_WDT_INT		(NR_IRQS_LEGACY + 63)
-
-/* DMA */
-#define MX1_DMA_REQ_UART3_T		2
-#define MX1_DMA_REQ_UART3_R		3
-#define MX1_DMA_REQ_SSI2_T		4
-#define MX1_DMA_REQ_SSI2_R		5
-#define MX1_DMA_REQ_CSI_STAT		6
-#define MX1_DMA_REQ_CSI_R		7
-#define MX1_DMA_REQ_MSHC		8
-#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
-#define MX1_DMA_REQ_DSPA_DCT_DIN	10
-#define MX1_DMA_REQ_DSPA_MAC		11
-#define MX1_DMA_REQ_EXT			12
-#define MX1_DMA_REQ_SDHC		13
-#define MX1_DMA_REQ_SPI1_R		14
-#define MX1_DMA_REQ_SPI1_T		15
-#define MX1_DMA_REQ_SSI_T		16
-#define MX1_DMA_REQ_SSI_R		17
-#define MX1_DMA_REQ_ASP_DAC		18
-#define MX1_DMA_REQ_ASP_ADC		19
-#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
-#define MX1_DMA_REQ_SPI2_R		26
-#define MX1_DMA_REQ_SPI2_T		27
-#define MX1_DMA_REQ_UART2_T		28
-#define MX1_DMA_REQ_UART2_R		29
-#define MX1_DMA_REQ_UART1_T		30
-#define MX1_DMA_REQ_UART1_R		31
-
-/*
- * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
- * to not break drivers/usb/gadget/imx_udc.  Should go
- * away after this driver uses the new name.
- */
-#define USBD_INT0		MX1_INT_USBD0
-
-#endif /* ifndef __MACH_MX1_H__ */

arch/arm/mach-mxs/mach-mxs.c

@@ -268,80 +268,6 @@ static void __init apx4devkit_init(void)
 					   apx4devkit_phy_fixup);
 }
 
-#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
-#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
-#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
-#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
-#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
-#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
-#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
-#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
-#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
-
-static const struct gpio const tx28_gpios[] __initconst = {
-	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
-	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
-	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
-	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
-	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
-	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
-	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
-	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
-	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
-	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
-	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
-};
-
-static void __init tx28_post_init(void)
-{
-	struct device_node *np;
-	struct platform_device *pdev;
-	struct pinctrl *pctl;
-	int ret;
-
-	enable_clk_enet_out();
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
-	pdev = of_find_device_by_node(np);
-	if (!pdev) {
-		pr_err("%s: failed to find fec device\n", __func__);
-		return;
-	}
-
-	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
-	if (IS_ERR(pctl)) {
-		pr_err("%s: failed to get pinctrl state\n", __func__);
-		return;
-	}
-
-	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
-	if (ret) {
-		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
-		return;
-	}
-
-	/* Power up fec phy */
-	gpio_set_value(TX28_FEC_PHY_POWER, 1);
-	msleep(26); /* 25ms according to data sheet */
-
-	/* Mode strap pins */
-	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
-	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
-	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	/* Deasserting FEC PHY RESET */
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	pinctrl_put(pctl);
-}
-
 static void __init crystalfontz_init(void)
 {
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
@@ -501,9 +427,6 @@ static void __init mxs_machine_init(void)
 	of_platform_default_populate(NULL, NULL, parent);
 
 	mxs_restart_init();
-
-	if (of_machine_is_compatible("karo,tx28"))
-		tx28_post_init();
 }
 
 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)

drivers/clk/imx/clk-imx1.c

@@ -45,10 +45,13 @@ static void __iomem *ccm __initdata;
 #define CCM_PCDR	(ccm + 0x0020)
 #define SCM_GCCR	(ccm + 0x0810)
 
-static void __init _mx1_clocks_init(unsigned long fref)
+static void __init mx1_clocks_init_dt(struct device_node *np)
 {
+	ccm = of_iomap(np, 0);
+	BUG_ON(!ccm);
+
 	clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
-	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", 32768);
 	clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
 	clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
 	clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
@@ -74,45 +77,6 @@ static void __init _mx1_clocks_init(unsigned long fref)
 	clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
 
 	imx_check_clocks(clk, ARRAY_SIZE(clk));
-}
-
-int __init mx1_clocks_init(unsigned long fref)
-{
-	ccm = ioremap(MX1_CCM_BASE_ADDR, SZ_4K);
-	BUG_ON(!ccm);
-
-	_mx1_clocks_init(fref);
-
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
-	clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
-
-	mxc_timer_init(MX1_TIM1_BASE_ADDR, MX1_TIM1_INT, GPT_TYPE_IMX1);
-
-	return 0;
-}
-
-static void __init mx1_clocks_init_dt(struct device_node *np)
-{
-	ccm = of_iomap(np, 0);
-	BUG_ON(!ccm);
-
-	_mx1_clocks_init(32768);
 
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);