net: broadcom: remove leading spaces before tabs

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/b44.c

@@ -1556,8 +1556,8 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 	plen0 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
 				  B44_ETHIPV4UDP_HLEN);
 
-   	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE, B44_PATTERN_BASE);
-   	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE, B44_PMASK_BASE);
+	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE, B44_PATTERN_BASE);
+	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE, B44_PMASK_BASE);
 
 	/* Raw ethernet II magic packet pattern - pattern 1 */
 	memset(pwol_pattern, 0, B44_PATTERN_SIZE);
@@ -1565,9 +1565,9 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 	plen1 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
 				  ETH_HLEN);
 
-   	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
+	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
 		       B44_PATTERN_BASE + B44_PATTERN_SIZE);
-  	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
+	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
 		       B44_PMASK_BASE + B44_PMASK_SIZE);
 
 	/* Ipv6 magic packet pattern - pattern 2 */
@@ -1576,9 +1576,9 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 	plen2 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
 				  B44_ETHIPV6UDP_HLEN);
 
-   	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
+	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
 		       B44_PATTERN_BASE + B44_PATTERN_SIZE + B44_PATTERN_SIZE);
-  	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
+	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
 		       B44_PMASK_BASE + B44_PMASK_SIZE + B44_PMASK_SIZE);
 
 	kfree(pwol_pattern);
@@ -1631,9 +1631,9 @@ static void b44_setup_wol(struct b44 *bp)
 		val = br32(bp, B44_DEVCTRL);
 		bw32(bp, B44_DEVCTRL, val | DEVCTRL_MPM | DEVCTRL_PFE);
 
- 	} else {
- 		b44_setup_pseudo_magicp(bp);
- 	}
+	} else {
+		b44_setup_pseudo_magicp(bp);
+	}
 	b44_setup_wol_pci(bp);
 }
 
@@ -1757,7 +1757,7 @@ static void __b44_set_rx_mode(struct net_device *dev)
 			__b44_cam_write(bp, zero, i);
 
 		bw32(bp, B44_RXCONFIG, val);
-        	val = br32(bp, B44_CAM_CTRL);
+		val = br32(bp, B44_CAM_CTRL);
 	        bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
 	}
 }

drivers/net/ethernet/broadcom/bnx2.c

@@ -572,7 +572,7 @@ bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val)
 	}
 
 	if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)
-        	ret = -EBUSY;
+		ret = -EBUSY;
 	else
 		ret = 0;
 
@@ -3599,7 +3599,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 		for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
 			BNX2_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4),
 				0xffffffff);
-        	}
+		}
 		sort_mode |= BNX2_RPM_SORT_USER0_MC_EN;
 	}
 	else {
@@ -4674,7 +4674,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 
 				if (addr == page_end-4) {
 					cmd_flags = BNX2_NVM_COMMAND_LAST;
-                		}
+				}
 				rc = bnx2_nvram_write_dword(bp, addr,
 					&flash_buffer[i], cmd_flags);