Commit 90e5f82c authored by Yadi.hu's avatar Yadi.hu Committed by Ben Hutchings

i2c-eg20t: fix race between i2c init and interrupt enable

commit 371a0153 upstream.

the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.

there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.

At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.
Signed-off-by: default avatarYadi.hu <yadi.hu@windriver.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent d09dfcf6
......@@ -777,13 +777,6 @@ static int pch_i2c_probe(struct pci_dev *pdev,
/* Set the number of I2C channel instance */
adap_info->ch_num = id->driver_data;
ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
KBUILD_MODNAME, adap_info);
if (ret) {
pch_pci_err(pdev, "request_irq FAILED\n");
goto err_request_irq;
}
for (i = 0; i < adap_info->ch_num; i++) {
pch_adap = &adap_info->pch_data[i].pch_adapter;
adap_info->pch_i2c_suspended = false;
......@@ -800,6 +793,17 @@ static int pch_i2c_probe(struct pci_dev *pdev,
adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
pch_adap->dev.parent = &pdev->dev;
}
ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
KBUILD_MODNAME, adap_info);
if (ret) {
pch_pci_err(pdev, "request_irq FAILED\n");
goto err_request_irq;
}
for (i = 0; i < adap_info->ch_num; i++) {
pch_adap = &adap_info->pch_data[i].pch_adapter;
pch_i2c_init(&adap_info->pch_data[i]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment