Import 2.3.21

Documentation/fb/framebuffer.txt

@@ -2,7 +2,7 @@
 			-----------------------
 
 Maintained by Geert Uytterhoeven <geert@linux-m68k.org>
-Last revised: November 7, 1998
+Last revised: October 7, 1999
 
 
 0. Introduction
@@ -304,7 +304,20 @@ applications, please refer to the following documentation:
       o linux/include/video/
 
 
-8. Downloading
+
+8. Mailing list
+---------------
+
+There's a _development_ mailing list at linux-fbdev@vuser.vu.union.edu,
+controlled by majordomo. Send an email with `help' in the message body to
+majordomo@vuser.vu.union.edu for subscription information.
+
+The mailing list is archived at
+
+    http://www.mail-archive.com/linux-fbdev@vuser.vu.union.edu/
+
+
+9. Downloading
 --------------
 
 All necessary files can be found at
@@ -313,8 +326,12 @@ All necessary files can be found at
 
 and on its mirrors.
 
+The latest version of fbset can be found at
+
+    http://www.cs.kuleuven.ac.be/~geert/bin/
+
   
-9. Credits                                                       
+10. Credits                                                       
 ----------                                                       
                 
 This readme was written by Geert Uytterhoeven, partly based on the original

arch/i386/boot/Makefile

@@ -8,9 +8,6 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
-AS86	=$(CROSS_COMPILE)as86 -0 -a
-LD86	=$(CROSS_COMPILE)ld86 -0
-
 BOOT_INCL =	$(TOPDIR)/include/linux/config.h \
 		$(TOPDIR)/include/linux/autoconf.h \
 		$(TOPDIR)/include/asm/boot.h
@@ -45,40 +42,40 @@ install: $(CONFIGURE) $(BOOTIMAGE)
 tools/build: tools/build.c
 	$(HOSTCC) $(HOSTCFLAGS) -o $@ $< -I$(TOPDIR)/include
 
-setup: setup.o
-	$(LD86) -s -o $@ $<
+bootsect: bootsect.o
+	$(LD) -Ttext 0x0 -s -oformat binary -o $@ $<
 
-setup.o: setup.s
-	$(AS86) -o $@ $<
+bootsect.o: bootsect.s
+	$(AS) -o $@ $<
 
-setup.s: setup.S video.S Makefile $(BOOT_INCL) $(TOPDIR)/include/linux/version.h $(TOPDIR)/include/linux/compile.h
+bootsect.s: bootsect.S Makefile $(BOOT_INCL)
 	$(CPP) -traditional $(SVGA_MODE) $(RAMDISK) $< -o $@
 
-bsetup: bsetup.o
-	$(LD86) -s -o $@ $<
+bbootsect: bbootsect.o bsetup
+	$(LD) -Ttext 0x0 -s -oformat binary $< -R bsetup.o -o $@
 
-bsetup.o: bsetup.s
-	$(AS86) -o $@ $<
+bbootsect.o: bbootsect.s
+	$(AS) -o $@ $<
 
-bsetup.s: setup.S video.S Makefile $(BOOT_INCL) $(TOPDIR)/include/linux/version.h $(TOPDIR)/include/linux/compile.h
+bbootsect.s: bootsect.S Makefile $(BOOT_INCL)
 	$(CPP) -D__BIG_KERNEL__ -traditional $(SVGA_MODE) $(RAMDISK) $< -o $@
 
-bootsect: bootsect.o
-	$(LD86) -s -o $@ $<
+setup: setup.o
+	$(LD) -Ttext 0x0 -s -oformat binary -e begtext -o $@ $<
 
-bootsect.o: bootsect.s
-	$(AS86) -o $@ $<
+setup.o: setup.s
+	$(AS) -o $@ $<
 
-bootsect.s: bootsect.S Makefile $(BOOT_INCL)
+setup.s: setup.S video.S Makefile $(BOOT_INCL) $(TOPDIR)/include/linux/version.h $(TOPDIR)/include/linux/compile.h
 	$(CPP) -traditional $(SVGA_MODE) $(RAMDISK) $< -o $@
 
-bbootsect: bbootsect.o
-	$(LD86) -s -o $@ $<
+bsetup: bsetup.o
+	$(LD) -Ttext 0x0 -s -oformat binary -e begtext -o $@ $<
 
-bbootsect.o: bbootsect.s
-	$(AS86) -o $@ $<
+bsetup.o: bsetup.s
+	$(AS) -o $@ $<
 
-bbootsect.s: bootsect.S Makefile $(BOOT_INCL)
+bsetup.s: setup.S video.S Makefile $(BOOT_INCL) $(TOPDIR)/include/linux/version.h $(TOPDIR)/include/linux/compile.h
 	$(CPP) -D__BIG_KERNEL__ -traditional $(SVGA_MODE) $(RAMDISK) $< -o $@
 
 dep:

arch/i386/boot/compressed/Makefile

@@ -39,7 +39,7 @@ piggy.o:	$(SYSTEM)
 	$(OBJCOPY) $(SYSTEM) $$tmppiggy; \
 	gzip -f -9 < $$tmppiggy > $$tmppiggy.gz; \
 	echo "SECTIONS { .data : { input_len = .; LONG(input_data_end - input_data) input_data = .; *(.data) input_data_end = .; }}" > $$tmppiggy.lnk; \
-	$(LD) -m elf_i386 -r -o piggy.o -b binary $$tmppiggy.gz -b elf32-i386 -T $$tmppiggy.lnk; \
+	$(LD) -r -o piggy.o -b binary $$tmppiggy.gz -b elf32-i386 -T $$tmppiggy.lnk; \
 	rm -f $$tmppiggy $$tmppiggy.gz $$tmppiggy.lnk
 
 clean:

arch/i386/boot/tools/build.c

@@ -58,27 +58,10 @@ void die(const char * str, ...)
 	exit(1);
 }
 
-/* Reading of ld86 output (Minix format) */
-
-#define MINIX_HEADER_LEN 32
-
-void minix_open(const char *name)
+void file_open(const char *name)
 {
-	static byte hdr[] = { 0x01, 0x03, 0x10, 0x04, 0x20, 0x00, 0x00, 0x00 };
-	static u32 *lb = (u32 *) buf;
-
 	if ((fd = open(name, O_RDONLY, 0)) < 0)
 		die("Unable to open `%s': %m", name);
-	if (read(fd, buf, MINIX_HEADER_LEN) != MINIX_HEADER_LEN)
-		die("%s: Unable to read header", name);
-	if (memcmp(buf, hdr, sizeof(hdr)) || lb[5])
-		die("%s: Non-Minix header", name);
-	if (lb[3])
-		die("%s: Illegal data segment");
-	if (lb[4])
-		die("%s: Illegal bss segment");
-	if (lb[7])
-		die("%s: Illegal symbol table");
 }
 
 void usage(void)
@@ -125,7 +108,7 @@ int main(int argc, char ** argv)
 	}
 	fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
 
-	minix_open(argv[1]);				    /* Copy the boot sector */
+	file_open(argv[1]);
 	i = read(fd, buf, sizeof(buf));
 	fprintf(stderr,"Boot sector %d bytes.\n",i);
 	if (i != 512)
@@ -138,7 +121,7 @@ int main(int argc, char ** argv)
 		die("Write call failed");
 	close (fd);
 
-	minix_open(argv[2]);				    /* Copy the setup code */
+	file_open(argv[2]);				    /* Copy the setup code */
 	for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
 		if (write(1, buf, c) != c)
 			die("Write call failed");
@@ -146,8 +129,8 @@ int main(int argc, char ** argv)
 		die("read-error on `setup'");
 	close (fd);
 
-	setup_sectors = (i + 511) / 512;		    /* Pad unused space with zeros */
-	/* for compatibility with ancient versions of LILO */
+	setup_sectors = (i + 511) / 512;	/* Pad unused space with zeros */
+	/* for compatibility with ancient versions of LILO. */
 	if (setup_sectors < SETUP_SECTS)
 		setup_sectors = SETUP_SECTS;
 	fprintf(stderr, "Setup is %d bytes.\n", i);
@@ -161,8 +144,7 @@ int main(int argc, char ** argv)
 		i += c;
 	}
 
-	if ((fd = open(argv[3], O_RDONLY, 0)) < 0)	    /* Copy the image itself */
-		die("Unable to open `%s': %m", argv[3]);
+	file_open(argv[3]);
 	if (fstat (fd, &sb))
 		die("Unable to stat `%s': %m", argv[3]);
 	sz = sb.st_size;
@@ -187,7 +169,7 @@ int main(int argc, char ** argv)
 	}
 	close(fd);
 
-	if (lseek(1, 497, SEEK_SET) != 497)		    /* Write sizes to the boot sector */
+	if (lseek(1, 497, SEEK_SET) != 497)		    /* Write sizes to the bootsector */
 		die("Output: seek failed");
 	buf[0] = setup_sectors;
 	if (write(1, buf, 1) != 1)

arch/i386/defconfig

@@ -242,6 +242,52 @@ CONFIG_DUMMY=m
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DEPCA is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_EISA=y
+# CONFIG_PCNET32 is not set
+# CONFIG_ACENIC is not set
+# CONFIG_APRICOT is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_DEC_ELCP is not set
+# CONFIG_DGRS is not set
+CONFIG_EEXPRESS_PRO100=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_FDDI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring driver support
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# PCMCIA network devices
+#
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_3C589 is not set
+CONFIG_PCMCIA_RAYCS=y
+CONFIG_PCMCIA_NETCARD=y
 
 #
 # Amateur Radio support

drivers/char/qpmouse.c

@@ -42,7 +42,7 @@
 #include <asm/system.h>
 #include <asm/semaphore.h>
 
-#include "pc_keyb.h"		/* mouse enable command.. */
+#include <linux/pc_keyb.h>		/* mouse enable command.. */
 
 
 /*
@@ -134,7 +134,7 @@ static void qp_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
 	}
 	queue->head = head;
 	if (queue->fasync)
-		kill_fasync(queue->fasync, SIGIO);
+		kill_fasync(queue->fasync, SIGIO, POLL_IN);
 	wake_up_interruptible(&queue->proc_list);
 }
 

drivers/net/Config.in

@@ -130,9 +130,9 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
    bool '  EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA
    if [ "$CONFIG_NET_EISA" = "y" ]; then
       tristate '    AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32
-      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-	 # tristate '    Adaptec Starfire support (EXPERIMENTAL)' CONFIG_ADAPTEC_STARFIRE
-      fi
+#     if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+#	 tristate '    Adaptec Starfire support (EXPERIMENTAL)' CONFIG_ADAPTEC_STARFIRE
+#     fi
       tristate '    Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC
       if [ "$CONFIG_ACENIC" != "n" ]; then
 	 bool '      Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I

drivers/scsi/imm.c

@@ -166,16 +166,9 @@ int imm_detect(Scsi_Host_Template * host)
 	 */
 	imm_hosts[i].mode = IMM_NIBBLE;
 
-	if (modes & PARPORT_MODE_PCPS2)
+	if (modes & PARPORT_MODE_TRISTATE)
 	    imm_hosts[i].mode = IMM_PS2;
 
-	if (modes & PARPORT_MODE_PCECPPS2) {
-	    w_ecr(ppb, 0x20);
-	    imm_hosts[i].mode = IMM_PS2;
-	}
-	if (modes & PARPORT_MODE_PCECPEPP)
-	    w_ecr(ppb, 0x80);
-
 	/* Done configuration */
 	imm_pb_release(i);
 

drivers/video/fbmem.c

@@ -459,6 +459,11 @@ fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		    for (i = 0; i < MAX_NR_CONSOLES; i++)
 			set_con2fb_map(i, con2fb.framebuffer);
 		return 0;
+	case FBIOBLANK:
+		if (info->blank == 0)
+			return -EINVAL;
+		(*info->blank)(arg, info);
+		return 0;
 	default:
 		return fb->fb_ioctl(inode, file, cmd, arg, PROC_CONSOLE(info),
 				    info);

fs/partitions/msdos.c

@@ -26,6 +26,7 @@
 #include <linux/major.h>
 #include <linux/string.h>
 #include <linux/blk.h>
+#include <linux/ide.h>	/* IDE xlate */
 
 #include <asm/system.h>
 

include/asm-alpha/keyboard.h

@@ -37,6 +37,31 @@ extern unsigned char pckbd_sysrq_xlate[128];
 
 #define SYSRQ_KEY 0x54
 
+/* resource allocation */
+#define kbd_request_region()
+#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
+                                             "keyboard", NULL)
+
+/* How to access the keyboard macros on this platform.  */
+#define kbd_read_input() inb(KBD_DATA_REG)
+#define kbd_read_status() inb(KBD_STATUS_REG)
+#define kbd_write_output(val) outb(val, KBD_DATA_REG)
+#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
+
+/* Some stoneage hardware needs delays after some operations.  */
+#define kbd_pause() do { } while(0)
+
+/*
+ * Machine specific bits for the PS/2 driver
+ */
+
+#define AUX_IRQ 12
+
+#define aux_request_irq(hand, dev_id)                                  \
+       request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS/2 Mouse", dev_id)
+
+#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASMalpha_KEYBOARD_H */

include/asm-alpha/uaccess.h

@@ -487,6 +487,15 @@ extern inline long strlen_user(const char *str)
 	return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0;
 }
 
+/* Returns: 0 if exception before NUL or reaching the supplied limit (N),
+ * a value greater than N if the limit would be exceeded, else strlen.  */
+extern long __strnlen_user(const char *, long);
+
+extern inline long strnlen_user(const char *str, long n)
+{
+	return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0;
+}
+
 /*
  * About the exception table:
  *

include/linux/fb.h

@@ -26,6 +26,7 @@
 /* #define FBIOSWITCH_MONIBIT	0x460E */
 #define FBIOGET_CON2FBMAP	0x460F
 #define FBIOPUT_CON2FBMAP	0x4610
+#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
 
 #define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
 #define FB_TYPE_PLANES			1	/* Non interleaved planes */

include/linux/ide.h

@@ -46,9 +46,6 @@
 #ifndef OK_TO_RESET_CONTROLLER		/* 1 needed for good error recovery */
 #define OK_TO_RESET_CONTROLLER	1	/* 0 for use with AH2372A/B interface */
 #endif
-#ifndef FAKE_FDISK_FOR_EZDRIVE		/* 1 to help linux fdisk with EZDRIVE */
-#define FAKE_FDISK_FOR_EZDRIVE 	1	/* 0 to reduce kernel size */
-#endif
 #ifndef FANCY_STATUS_DUMPS		/* 1 for human-readable drive errors */
 #define FANCY_STATUS_DUMPS	1	/* 0 to reduce kernel size */
 #endif
@@ -262,9 +259,7 @@ typedef struct ide_drive_s {
 	unsigned nice2		: 1;	/* flag: give a share in our own bandwidth */
 	unsigned doorlocking	: 1;	/* flag: for removable only: door lock/unlock works */
 	unsigned autotune	: 2;	/* 1=autotune, 2=noautotune, 0=default */
-#if FAKE_FDISK_FOR_EZDRIVE
-	unsigned remap_0_to_1	: 1;	/* flag: partitioned with ezdrive */
-#endif /* FAKE_FDISK_FOR_EZDRIVE */
+	unsigned remap_0_to_1	: 2;	/* 0=remap if ezdrive, 1=remap, 2=noremap */
 	unsigned ata_flash	: 1;	/* 1=present, 0=default */
 	byte		media;		/* disk, cdrom, tape, floppy, ... */
 	select_t	select;		/* basic drive/head select reg value */
@@ -282,8 +277,9 @@ typedef struct ide_drive_s {
 	byte		sect;		/* "real" sectors per track */
 	byte		bios_head;	/* BIOS/fdisk/LILO number of heads */
 	byte		bios_sect;	/* BIOS/fdisk/LILO sectors per track */
-	unsigned short	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
-	unsigned short	cyl;		/* "real" number of cyls */
+	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
+	unsigned int	cyl;		/* "real" number of cyls */
+	unsigned long	capacity;	/* total number of sectors */
 	unsigned int	drive_data;	/* for use by tuneproc/selectproc as needed */
 	void		  *hwif;	/* actually (ide_hwif_t *) */
 	wait_queue_head_t wqueue;	/* used to wait for drive in open() */
@@ -624,21 +620,19 @@ int ide_wait_stat (ide_drive_t *drive, byte good, byte bad, unsigned long timeou
 /*
  * This routine is called from the partition-table code in genhd.c
  * to "convert" a drive to a logical geometry with fewer than 1024 cyls.
- *
- * The second parameter, "xparm", determines exactly how the translation
- * will be handled:
- *		 0 = convert to CHS with fewer than 1024 cyls
- *			using the same method as Ontrack DiskManager.
- *		 1 = same as "0", plus offset everything by 63 sectors.
- *		-1 = similar to "0", plus redirect sector 0 to sector 1.
- *		>1 = convert to a CHS geometry with "xparm" heads.
- *
- * Returns 0 if the translation was not possible, if the device was not
- * an IDE disk drive, or if a geometry was "forced" on the commandline.
- * Returns 1 if the geometry translation was successful.
  */
 int ide_xlate_1024 (kdev_t, int, int, const char *);
 
+/*
+ * Convert kdev_t structure into ide_drive_t * one.
+ */
+ide_drive_t *get_info_ptr (kdev_t i_rdev);
+
+/*
+ * Return the current idea about the total capacity of this drive.
+ */
+unsigned long current_capacity (ide_drive_t *drive);
+
 /*
  * Start a reset operation for an IDE interface.
  * The caller should return immediately after invoking this.

include/linux/sched.h

@@ -823,8 +823,8 @@ extern inline int task_on_runqueue(struct task_struct *p)
 extern inline void unhash_process(struct task_struct *p)
 {
 	if (task_on_runqueue(p)) BUG();
-	nr_threads--;
 	write_lock_irq(&tasklist_lock);
+	nr_threads--;
 	unhash_pid(p);
 	REMOVE_LINKS(p);
 	write_unlock_irq(&tasklist_lock);

include/linux/tty.h

@@ -326,6 +326,7 @@ struct tty_struct {
 #define TTY_HW_COOK_OUT 14
 #define TTY_HW_COOK_IN 15
 #define TTY_PTY_LOCK 16
+#define TTY_NO_WRITE_SPLIT 17
 
 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
 

kernel/fork.c

@@ -592,6 +592,12 @@ int do_fork(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs)
 	struct task_struct *p;
 	DECLARE_MUTEX_LOCKED(sem);
 
+	if (clone_flags & CLONE_PID) {
+		/* This is only allowed from the boot up thread */
+		if (current->pid)
+			return -EPERM;
+	}
+	
 	current->vfork_sem = &sem;
 
 	p = alloc_task_struct();
@@ -610,8 +616,9 @@ int do_fork(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs)
 	}
 
 	/*
-	 * Counter atomicity is protected by
-	 * the kernel lock
+	 * Counter increases are protected by
+	 * the kernel lock so nr_threads can't
+	 * increase under us (but it may decrease).
 	 */
 	if (nr_threads >= max_threads)
 		goto bad_fork_cleanup_count;
@@ -711,9 +718,9 @@ int do_fork(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs)
 	write_lock_irq(&tasklist_lock);
 	SET_LINKS(p);
 	hash_pid(p);
+	nr_threads++;
 	write_unlock_irq(&tasklist_lock);
 
-	nr_threads++;
 	wake_up_process(p);		/* do this last */
 	++total_forks;
 
@@ -735,8 +742,6 @@ int do_fork(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs)
 		__MOD_DEC_USE_COUNT(p->exec_domain->module);
 	if (p->binfmt && p->binfmt->module)
 		__MOD_DEC_USE_COUNT(p->binfmt->module);
-
-	nr_threads--;
 bad_fork_cleanup_count:
 	if (p->user)
 		free_uid(p);