Commit 9109a30e authored by Magnus Damm's avatar Magnus Damm Committed by Paul Mundt

sh: add support for sh7366 processor

This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.
Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent d847afe7
......@@ -315,6 +315,13 @@ config CPU_SUBTYPE_SH7722
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
......
......@@ -30,7 +30,7 @@ config EARLY_SCIF_CONSOLE_PORT
hex
depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
default "0xffe00000" if CPU_SUBTYPE_SH7722
default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
......
......@@ -132,6 +132,12 @@ int __init detect_cpu_and_cache_system(void)
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
else if (prr == 0x70) {
boot_cpu_data.type = CPU_SH7366;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */
......
......@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# SMP setup
......@@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
obj-y += $(clock-y)
......
/*
* arch/sh/kernel/cpu/sh4a/clock-sh7722.c
*
* SH7722 support for the clock framework
* SH7722 & SH7366 support for the clock framework
*
* Copyright (c) 2006-2007 Nomad Global Solutions Inc
* Based on code for sh7343 by Paul Mundt
......@@ -417,15 +417,19 @@ static int sh7722_siu_which(struct clk *clk)
return 0;
if (!strcmp(clk->name, "siu_b_clk"))
return 1;
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
if (!strcmp(clk->name, "irda_clk"))
return 2;
#endif
return -EINVAL;
}
static unsigned long sh7722_siu_regs[] = {
[0] = SCLKACR,
[1] = SCLKBCR,
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
[2] = IrDACLKCR,
#endif
};
static int sh7722_siu_start_stop(struct clk *clk, int enable)
......@@ -571,10 +575,12 @@ static struct clk sh7722_siu_b_clock = {
.ops = &sh7722_siu_clk_ops,
};
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
static struct clk sh7722_irda_clock = {
.name = "irda_clk",
.ops = &sh7722_siu_clk_ops,
};
#endif
static struct clk sh7722_video_clock = {
.name = "video_clk",
......@@ -588,7 +594,9 @@ static struct clk *sh7722_clocks[] = {
&sh7722_sdram_clock,
&sh7722_siu_a_clock,
&sh7722_siu_b_clock,
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
&sh7722_irda_clock,
#endif
&sh7722_video_clock,
};
......
/*
* SH7366 Setup
*
* Copyright (C) 2008 Renesas Solutions
*
* Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7366_devices[] __initdata = {
&sci_device,
};
static int __init sh7366_devices_setup(void)
{
return platform_add_devices(sh7366_devices,
ARRAY_SIZE(sh7366_devices));
}
__initcall(sh7366_devices_setup);
enum {
UNUSED=0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
ICB,
DMAC0, DMAC1, DMAC2, DMAC3,
VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
MFI, VPU, USB,
MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
DMAC4, DMAC5, DMAC_DADERR,
SCIF, SCIFA1, SCIFA2,
DENC, MSIOF,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
SDHI0, SDHI1, SDHI2, SDHI3,
CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
VEU2, LCDC,
/* interrupt groups */
DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
INTC_VECT(ICB, 0x700),
INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
INTC_VECT(MMC_MMC3I, 0xb40),
INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
INTC_VECT(DMAC_DADERR, 0xbc0),
INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
INTC_VECT(SCIFA2, 0xc40),
INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440),
INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ } },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
{ 0, 0, 0, VPU, 0, 0, 0, MFI } },
{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
{ 0, 0, 0, ICB } },
{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
{ 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
{ 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
{ 0, 0, 0, 0, 0, 0, 0, MSIOF } },
{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
{ SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
{ 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
{ 0, 0, 0, 0, 0, 0, 0, TSIF } },
{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
{ 0xa4080008, 0, 16, 4, /* IPRC */ { } },
{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
{ 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
{ 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
{ 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
{ 0xa408002c, 0, 16, 4, /* IPRL */ { } },
{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa414001c, 16, 2, /* ICR1 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
mask_registers, prio_registers, sense_registers);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
void __init plat_mem_setup(void)
{
/* TODO: Register Node 1 */
}
......@@ -333,7 +333,7 @@ static const char *cpu_name[] = {
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_SH_NONE] = "Unknown"
[CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
......
......@@ -393,7 +393,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
/* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
......
......@@ -97,6 +97,12 @@
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
# define PORT_PSCR 0xA405011E
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
......@@ -577,7 +583,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
......
......@@ -10,12 +10,14 @@
#ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
#define FRQCR 0xa4150000
#define VCLKCR 0xa4150004
#define SCLKACR 0xa4150008
#define SCLKBCR 0xa415000c
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#define IrDACLKCR 0xa4150010
#endif
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
......
......@@ -33,7 +33,7 @@ enum cpu_type {
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722,
CPU_SH7343, CPU_SH7722, CPU_SH7366,
/* SH-5 types */
CPU_SH5_101, CPU_SH5_103,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment