Commit 9121dfca authored by Olof Johansson's avatar Olof Johansson

Merge tag 'omap-for-v3.8/devel-prcm-signed' of...

Merge tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm2

From Tony Lindgren:

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM
change needed for one of the hwmod patches to function.

Basic test logs for this branch on top of Tony's
omap-for-v3.8/clock branch at commit
558a0780 are here:

http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/

However, omap-for-v3.8/clock at 558a0780 does not include some fixes
that are needed for a successful test.  With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:

http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/

which indicate that the series tests cleanly.

* tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits)
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP44xx: clock: drop obsolete clock data
  ARM: OMAP4: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP: hwmod: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP: clock: Switch to COMMON clk
  ARM: OMAP2: clock: Add 24xx data using common struct clk
  ARM: OMAP3: clock: Add 3xxx data using common struct clk
  ARM: AM33XX: clock: add clock data in common clock format
  ARM: OMAP4: clock: Add 44xx data using common struct clk
  ARM: OMAP2+: clock: add OMAP CCF convenience macros to mach-omap2/clock.h
  ...

Some context conflicts due to nearby changes resolved in
arch/arm/mach-omap2/io.c.
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 77f9db89 8b9c1ac2
......@@ -34,6 +34,7 @@ config ARCH_OMAP2
select CPU_V6
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
select COMMON_CLK
config ARCH_OMAP3
bool "TI OMAP3"
......@@ -47,6 +48,7 @@ config ARCH_OMAP3
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
select COMMON_CLK
select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
......@@ -68,6 +70,7 @@ config ARCH_OMAP4
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select COMMON_CLK
config SOC_OMAP5
bool "TI OMAP5"
......@@ -77,6 +80,7 @@ config SOC_OMAP5
select CPU_V7
select HAVE_SMP
select SOC_HAS_REALTIME_COUNTER
select COMMON_CLK
comment "OMAP Core Type"
depends on ARCH_OMAP2
......@@ -111,6 +115,7 @@ config SOC_AM33XX
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
select COMMON_CLK
config OMAP_PACKAGE_ZAF
bool
......
......@@ -160,17 +160,17 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
obj-$(CONFIG_SOC_OMAP2420) += cclock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o cclock2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o cclock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) cclock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
obj-$(CONFIG_SOC_AM33XX) += cclock33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
......
This diff is collapsed.
......@@ -38,62 +38,88 @@
/* Private functions */
static int _apll96_enable(struct clk *clk)
/**
* omap2xxx_clk_apll_locked - is the APLL locked?
* @hw: struct clk_hw * of the APLL to check
*
* If the APLL IP block referred to by @hw indicates that it's locked,
* return true; otherwise, return false.
*/
static bool omap2xxx_clk_apll_locked(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 r, apll_mask;
apll_mask = EN_APLL_LOCKED << clk->enable_bit;
r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
return ((r & apll_mask) == apll_mask) ? true : false;
}
int omap2_clk_apll96_enable(struct clk_hw *hw)
{
return omap2xxx_cm_apll96_enable();
}
static int _apll54_enable(struct clk *clk)
int omap2_clk_apll54_enable(struct clk_hw *hw)
{
return omap2xxx_cm_apll54_enable();
}
static void _apll96_allow_idle(struct clk *clk)
static void _apll96_allow_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll96_auto_low_power_stop();
}
static void _apll96_deny_idle(struct clk *clk)
static void _apll96_deny_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll96_disable_autoidle();
}
static void _apll54_allow_idle(struct clk *clk)
static void _apll54_allow_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll54_auto_low_power_stop();
}
static void _apll54_deny_idle(struct clk *clk)
static void _apll54_deny_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll54_disable_autoidle();
}
static void _apll96_disable(struct clk *clk)
void omap2_clk_apll96_disable(struct clk_hw *hw)
{
omap2xxx_cm_apll96_disable();
}
static void _apll54_disable(struct clk *clk)
void omap2_clk_apll54_disable(struct clk_hw *hw)
{
omap2xxx_cm_apll54_disable();
}
/* Public data */
unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return (omap2xxx_clk_apll_locked(hw)) ? 54000000 : 0;
}
const struct clkops clkops_apll96 = {
.enable = _apll96_enable,
.disable = _apll96_disable,
.allow_idle = _apll96_allow_idle,
.deny_idle = _apll96_deny_idle,
};
unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return (omap2xxx_clk_apll_locked(hw)) ? 96000000 : 0;
}
const struct clkops clkops_apll54 = {
.enable = _apll54_enable,
.disable = _apll54_disable,
/* Public data */
const struct clk_hw_omap_ops clkhwops_apll54 = {
.allow_idle = _apll54_allow_idle,
.deny_idle = _apll54_deny_idle,
};
const struct clk_hw_omap_ops clkhwops_apll96 = {
.allow_idle = _apll96_allow_idle,
.deny_idle = _apll96_deny_idle,
};
/* Public functions */
u32 omap2xxx_get_apll_clkin(void)
......
......@@ -29,7 +29,7 @@
* REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
* instead. Add some mechanism to optionally enter this mode.
*/
static void _allow_idle(struct clk *clk)
static void _allow_idle(struct clk_hw_omap *clk)
{
if (!clk || !clk->dpll_data)
return;
......@@ -43,7 +43,7 @@ static void _allow_idle(struct clk *clk)
*
* Disable DPLL automatic idle control. No return value.
*/
static void _deny_idle(struct clk *clk)
static void _deny_idle(struct clk_hw_omap *clk)
{
if (!clk || !clk->dpll_data)
return;
......@@ -53,9 +53,7 @@ static void _deny_idle(struct clk *clk)
/* Public data */
const struct clkops clkops_omap2xxx_dpll_ops = {
const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll = {
.allow_idle = _allow_idle,
.deny_idle = _deny_idle,
};
......@@ -40,7 +40,7 @@
* (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
* during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
*/
static struct clk *dpll_core_ck;
static struct clk_hw_omap *dpll_core_ck;
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
......@@ -104,13 +104,16 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
}
unsigned long omap2_dpllcore_recalc(struct clk *clk)
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return omap2xxx_clk_get_core_rate();
}
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0;
struct prcm_config tmpset;
......@@ -188,8 +191,8 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
* statically defined, this code may need to change to increment some
* kind of use count on dpll_ck.
*/
void omap2xxx_clkt_dpllcore_init(struct clk *clk)
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
{
WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
dpll_core_ck = clk;
dpll_core_ck = to_clk_hw_omap(hw);
}
......@@ -35,7 +35,7 @@
* clk_enable/clk_disable()-based usecounting for osc_ck should be
* replaced with autoidle-based usecounting.
*/
static int omap2_enable_osc_ck(struct clk *clk)
int omap2_enable_osc_ck(struct clk_hw *clk)
{
u32 pcc;
......@@ -53,7 +53,7 @@ static int omap2_enable_osc_ck(struct clk *clk)
* clk_enable/clk_disable()-based usecounting for osc_ck should be
* replaced with autoidle-based usecounting.
*/
static void omap2_disable_osc_ck(struct clk *clk)
void omap2_disable_osc_ck(struct clk_hw *clk)
{
u32 pcc;
......@@ -62,13 +62,8 @@ static void omap2_disable_osc_ck(struct clk *clk)
__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
const struct clkops clkops_oscck = {
.enable = omap2_enable_osc_ck,
.disable = omap2_disable_osc_ck,
};
unsigned long omap2_osc_clk_recalc(struct clk *clk)
unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate)
{
return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
}
......@@ -40,9 +40,8 @@ u32 omap2xxx_get_sysclkdiv(void)
return div;
}
unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate)
{
return clk->parent->rate / omap2xxx_get_sysclkdiv();
return parent_rate / omap2xxx_get_sysclkdiv();
}
......@@ -58,7 +58,8 @@ static unsigned long sys_ck_rate;
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
unsigned long omap2_table_mpu_recalc(struct clk *clk)
unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
unsigned long parent_rate)
{
return curr_prcm_set->mpu_speed;
}
......@@ -70,7 +71,8 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
* just uses the ARM rates.
*/
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
const struct prcm_config *ptr;
long highest_rate;
......@@ -93,7 +95,8 @@ long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
}
/* Sets basic clocks based on the specified rate */
int omap2_select_table_rate(struct clk *clk, unsigned long rate)
int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
u32 cur_rate, done_rate, bypass = 0, tmp;
const struct prcm_config *prcm;
......
......@@ -44,8 +44,10 @@
* Program the DPLL M2 divider with the rounded target rate. Returns
* -EINVAL upon error, or 0 upon success.
*/
int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 new_div = 0;
u32 unlock_dll = 0;
u32 c;
......@@ -63,7 +65,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
sdrcrate = __clk_get_rate(sdrc_ick_p);
clkrate = __clk_get_rate(clk);
clkrate = __clk_get_rate(hw->clk);
if (rate > clkrate)
sdrcrate <<= ((rate / clkrate) >> 1);
else
......@@ -112,8 +114,6 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
clk->rate = rate;
return 0;
}
This diff is collapsed.
......@@ -16,7 +16,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <asm/div64.h>
......@@ -76,7 +76,7 @@
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
static int _dpll_test_fint(struct clk *clk, u8 n)
static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
{
struct dpll_data *dd;
long fint, fint_min, fint_max;
......@@ -85,7 +85,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = __clk_get_rate(__clk_get_parent(clk)) / n;
fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
if (cpu_is_omap24xx()) {
/* Should not be called for OMAP2, so warn if it is called */
......@@ -186,15 +186,15 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
}
/* Public functions */
void omap2_init_dpll_parent(struct clk *clk)
u8 omap2_init_dpll_parent(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 v;
struct dpll_data *dd;
dd = clk->dpll_data;
if (!dd)
return;
return -EINVAL;
v = __raw_readl(dd->control_reg);
v &= dd->enable_mask;
......@@ -204,18 +204,18 @@ void omap2_init_dpll_parent(struct clk *clk)
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
return 1;
} else if (cpu_is_omap34xx()) {
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
return 1;
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
clk_reparent(clk, dd->clk_bypass);
return 1;
}
return;
return 0;
}
/**
......@@ -232,7 +232,7 @@ void omap2_init_dpll_parent(struct clk *clk)
* locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
* if the clock @clk is not a DPLL.
*/
u32 omap2_get_dpll_rate(struct clk *clk)
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
{
long long dpll_clk;
u32 dpll_mult, dpll_div, v;
......@@ -288,8 +288,10 @@ u32 omap2_get_dpll_rate(struct clk *clk)
* (expensive) function again. Returns ~0 if the target rate cannot
* be rounded, or the rounded rate upon success.
*/
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int m, n, r, scaled_max_m;
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
......@@ -303,7 +305,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
dd = clk->dpll_data;
ref_rate = __clk_get_rate(dd->clk_ref);
clk_name = __clk_get_name(clk);
clk_name = __clk_get_name(hw->clk);
pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
clk_name, target_rate);
......
......@@ -11,7 +11,7 @@
#undef DEBUG
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
......@@ -23,7 +23,7 @@
/* Private functions */
/* XXX */
void omap2_clkt_iclk_allow_idle(struct clk *clk)
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
{
u32 v, r;
......@@ -35,7 +35,7 @@ void omap2_clkt_iclk_allow_idle(struct clk *clk)
}
/* XXX */
void omap2_clkt_iclk_deny_idle(struct clk *clk)
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
{
u32 v, r;
......@@ -48,33 +48,17 @@ void omap2_clkt_iclk_deny_idle(struct clk *clk)
/* Public data */
const struct clkops clkops_omap2_iclk_dflt_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
.find_idlest = omap2_clk_dflt_find_idlest,
const struct clk_hw_omap_ops clkhwops_iclk = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
const struct clkops clkops_omap2_iclk_dflt = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
const struct clk_hw_omap_ops clkhwops_iclk_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clkops clkops_omap2_iclk_idle_only = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
const struct clkops clkops_omap2_mdmclk_dflt_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
.find_idlest = omap2_clk_dflt_find_idlest,
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment