ARM64: dts: marvell: enable USB host on Armada-7040-DB

Add I2C expander and USB host PHY (host 0 and host 1) to enable
USB VBUS on USB ports of type A on Armada-7040-DB.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -44,6 +44,7 @@
  * Device Tree file for Marvell Armada 7040 Development board platform
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-7040.dtsi"
 
 / {
@@ -59,6 +60,34 @@ memory@00000000 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+
+	cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cpm_usb3_0_phy: cpm-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cpm_reg_usb3_0_vbus>;
+	};
+
+	cpm_usb3_1_phy: cpm-usb3-1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cpm_reg_usb3_1_vbus>;
+	};
 };
 
 &i2c0 {
@@ -105,6 +134,14 @@ &cpm_pcie2 {
 &cpm_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
+
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+	};
 };
 
 &cpm_spi1 {
@@ -140,10 +177,12 @@ &cpm_sata0 {
 };
 
 &cpm_usb3_0 {
+	usb-phy = <&cpm_usb3_0_phy>;
 	status = "okay";
 };
 
 &cpm_usb3_1 {
+	usb-phy = <&cpm_usb3_1_phy>;
 	status = "okay";
 };