treewide: Fix printk() message errors

This patch fix spelling typos in printk and kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

arch/arm64/kernel/hibernate.c

@@ -136,7 +136,7 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
 
 	/* Save the mpidr of the cpu we called cpu_suspend() on... */
 	if (sleep_cpu < 0) {
-		pr_err("Failing to hibernate on an unkown CPU.\n");
+		pr_err("Failing to hibernate on an unknown CPU.\n");
 		return -ENODEV;
 	}
 	hdr->sleep_cpu_mpidr = cpu_logical_map(sleep_cpu);
@@ -547,7 +547,7 @@ int swsusp_arch_resume(void)
 int hibernate_resume_nonboot_cpu_disable(void)
 {
 	if (sleep_cpu < 0) {
-		pr_err("Failing to resume from hibernate on an unkown CPU.\n");
+		pr_err("Failing to resume from hibernate on an unknown CPU.\n");
 		return -ENODEV;
 	}
 

arch/mips/kernel/asm-offsets.c

@@ -341,7 +341,7 @@ void output_pm_defines(void)
 
 void output_kvm_defines(void)
 {
-	COMMENT(" KVM/MIPS Specfic offsets. ");
+	COMMENT(" KVM/MIPS Specific offsets. ");
 
 	OFFSET(VCPU_FPR0, kvm_vcpu_arch, fpu.fpr[0]);
 	OFFSET(VCPU_FPR1, kvm_vcpu_arch, fpu.fpr[1]);

arch/sh/kernel/cpu/Makefile

 #
-# Makefile for the Linux/SuperH CPU-specifc backends.
+# Makefile for the Linux/SuperH CPU-specific backends.
 #
 
 obj-$(CONFIG_CPU_SH2)		= sh2/

arch/sh/kernel/cpu/irq/Makefile

 #
-# Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
+# Makefile for the Linux/SuperH CPU-specific IRQ handlers.
 #
 obj-$(CONFIG_SUPERH32)			+= imask.o
 obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o

drivers/acpi/Kconfig

@@ -104,7 +104,7 @@ config ACPI_PROCFS_POWER
 	  Say N to delete power /proc/acpi/ directories that have moved to /sys/
 
 config ACPI_REV_OVERRIDE_POSSIBLE
-	bool "Allow supported ACPI revision to be overriden"
+	bool "Allow supported ACPI revision to be overridden"
 	depends on X86
 	default y
 	help

drivers/isdn/hisax/q931.c

@@ -855,7 +855,7 @@ struct DTag { /* Display tags */
 	{ 0x8c, "Reason" },
 	{ 0x8d, "Calling party name" },
 	{ 0x8e, "Called party name" },
-	{ 0x8f, "Orignal called name" },
+	{ 0x8f, "Original called name" },
 	{ 0x90, "Redirecting name" },
 	{ 0x91, "Connected name" },
 	{ 0x92, "Originating restrictions" },

drivers/media/usb/dvb-usb-v2/af9015.c

@@ -1455,7 +1455,7 @@ static const struct usb_device_id af9015_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU,
 		&af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810,
-		&af9015_props, "KWorld Digial MC-810", NULL) },
+		&af9015_props, "KWorld Digital MC-810", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03,
 		&af9015_props, "Genius TVGo DVB-T03", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2,

drivers/mfd/max77620.c

@@ -461,7 +461,7 @@ static int max77620_probe(struct i2c_client *client,
 	chip->rmap = devm_regmap_init_i2c(client, rmap_config);
 	if (IS_ERR(chip->rmap)) {
 		ret = PTR_ERR(chip->rmap);
-		dev_err(chip->dev, "Failed to intialise regmap: %d\n", ret);
+		dev_err(chip->dev, "Failed to initialise regmap: %d\n", ret);
 		return ret;
 	}
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -585,7 +585,7 @@ int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf,
 		mcast.mcast_list_len = mc_num;
 		rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_SET);
 		if (rc)
-			BNX2X_ERR("Faled to set multicasts\n");
+			BNX2X_ERR("Failed to set multicasts\n");
 	} else {
 		/* clear existing mcasts */
 		rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_DEL);

drivers/net/ethernet/qlogic/qed/qed_int.c

@@ -1377,7 +1377,7 @@ static const char *attn_master_to_str(u8 master)
 	case 9: return "DBU";
 	case 10: return "DMAE";
 	default:
-		return "Unkown";
+		return "Unknown";
 	}
 }
 
@@ -1555,7 +1555,7 @@ static int qed_dorq_attn_cb(struct qed_hwfn *p_hwfn)
 				     DORQ_REG_DB_DROP_DETAILS);
 
 		DP_INFO(p_hwfn->cdev,
-			"DORQ db_drop: adress 0x%08x Opaque FID 0x%04x Size [bytes] 0x%08x Reason: 0x%08x\n",
+			"DORQ db_drop: address 0x%08x Opaque FID 0x%04x Size [bytes] 0x%08x Reason: 0x%08x\n",
 			qed_rd(p_hwfn, p_hwfn->p_dpc_ptt,
 			       DORQ_REG_DB_DROP_DETAILS_ADDRESS),
 			(u16)(details & QED_DORQ_ATTENTION_OPAQUE_MASK),

drivers/net/ethernet/qlogic/qed/qed_sp_commands.c

@@ -369,7 +369,7 @@ int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
 		p_ramrod->personality = PERSONALITY_RDMA_AND_ETH;
 		break;
 	default:
-		DP_NOTICE(p_hwfn, "Unkown personality %d\n",
+		DP_NOTICE(p_hwfn, "Unknown personality %d\n",
 			  p_hwfn->hw_info.personality);
 		p_ramrod->personality = PERSONALITY_ETH;
 	}

drivers/net/wireless/ath/ath10k/pci.c

@@ -2091,7 +2091,7 @@ int ath10k_pci_init_config(struct ath10k *ar)
 
 	ret = ath10k_pci_diag_read32(ar, ealloc_targ_addr, &ealloc_value);
 	if (ret != 0) {
-		ath10k_err(ar, "Faile to get early alloc val: %d\n", ret);
+		ath10k_err(ar, "Failed to get early alloc val: %d\n", ret);
 		return ret;
 	}
 

drivers/net/wireless/ath/wil6210/txrx.c

@@ -326,7 +326,7 @@ static void wil_rx_add_radiotap_header(struct wil6210_priv *wil,
 
 	if (skb_headroom(skb) < rtap_len &&
 	    pskb_expand_head(skb, rtap_len, 0, GFP_ATOMIC)) {
-		wil_err(wil, "Unable to expand headrom to %d\n", rtap_len);
+		wil_err(wil, "Unable to expand headroom to %d\n", rtap_len);
 		return;
 	}
 

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c

@@ -134,7 +134,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
 			wait_h2c_limmit--;
 			if (wait_h2c_limmit == 0) {
 				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
-					 "Wating too long for FW read clear HMEBox(%d)!\n",
+					 "Waiting too long for FW read clear HMEBox(%d)!\n",
 					 boxnum);
 				break;
 			}

drivers/scsi/aic7xxx/aicasm/aicasm.c

@@ -254,7 +254,7 @@ main(int argc, char *argv[])
 	argv += optind;
 
 	if (argc != 1) {
-		fprintf(stderr, "%s: No input file specifiled\n", appname);
+		fprintf(stderr, "%s: No input file specified\n", appname);
 		usage();
 		/* NOTREACHED */
 	}

drivers/usb/dwc3/gadget.c

@@ -2491,7 +2491,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		 */
 		WARN_ONCE(dwc->revision < DWC3_REVISION_240A
 				&& dwc->has_lpm_erratum,
-				"LPM Erratum not available on dwc3 revisisions < 2.40a\n");
+				"LPM Erratum not available on dwc3 revisions < 2.40a\n");
 
 		if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
 			reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);

scripts/gcc-plugins/latent_entropy_plugin.c

@@ -619,7 +619,7 @@ __visible int plugin_init(struct plugin_name_args *plugin_info,
 			enabled = false;
 			continue;
 		}
-		error(G_("unkown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
+		error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
 	}
 
 	register_callback(plugin_name, PLUGIN_INFO, NULL,

scripts/gcc-plugins/sancov_plugin.c

@@ -126,7 +126,7 @@ __visible int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gc
 			enable = false;
 			continue;
 		}
-		error(G_("unkown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
+		error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
 	}
 
 	register_callback(plugin_name, PLUGIN_INFO, NULL, &sancov_plugin_info);

tools/power/acpi/tools/ec/ec_access.c

@@ -46,7 +46,7 @@ void usage(char progname[], int exit_status)
 	puts("\t-b offset          : Read value at byte_offset (in hex)");
 	puts("\t-w offset -v value : Write value at byte_offset");
 	puts("\t-h                 : Print this help\n\n");
-	puts("Offsets and values are in hexadecimal number sytem.");
+	puts("Offsets and values are in hexadecimal number system.");
 	puts("The offset and value must be between 0 and 0xff.");
 	exit(exit_status);
 }