EISA: Whitespace cleanup

Remove spaces on empty line and replace spaces with tabs.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/eisa/eisa-bus.c

@@ -75,9 +75,9 @@ static void __init eisa_name_device(struct eisa_device *edev)
 
 static char __init *decode_eisa_sig(unsigned long addr)
 {
-        static char sig_str[EISA_SIG_LEN];
+	static char sig_str[EISA_SIG_LEN];
 	u8 sig[4];
-        u16 rev;
+	u16 rev;
 	int i;
 
 	for (i = 0; i < 4; i++) {
@@ -96,14 +96,14 @@ static char __init *decode_eisa_sig(unsigned long addr)
 		if (!i && (sig[0] & 0x80))
 			return NULL;
 	}
-	
-        sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
-        sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
-        sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
-        rev = (sig[2] << 8) | sig[3];
-        sprintf(sig_str + 3, "%04X", rev);
-
-        return sig_str;
+
+	sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
+	sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
+	sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
+	rev = (sig[2] << 8) | sig[3];
+	sprintf(sig_str + 3, "%04X", rev);
+
+	return sig_str;
 }
 
 static int eisa_bus_match(struct device *dev, struct device_driver *drv)
@@ -198,7 +198,7 @@ static int __init eisa_init_device(struct eisa_root_device *root,
 	sig = decode_eisa_sig(sig_addr);
 	if (!sig)
 		return -1;	/* No EISA device here */
-	
+
 	memcpy(edev->id.sig, sig, EISA_SIG_LEN);
 	edev->slot = slot;
 	edev->state = inb(SLOT_ADDRESS(root, slot) + EISA_CONFIG_OFFSET)
@@ -222,7 +222,7 @@ static int __init eisa_init_device(struct eisa_root_device *root,
 
 	if (is_forced_dev(enable_dev, enable_dev_count, root, edev))
 		edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED;
-	
+
 	if (is_forced_dev(disable_dev, disable_dev_count, root, edev))
 		edev->state = EISA_CONFIG_FORCED;
 
@@ -275,7 +275,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root,
 			edev->res[i].start = edev->res[i].end = 0;
 			continue;
 		}
-		
+
 		if (slot) {
 			edev->res[i].name  = NULL;
 			edev->res[i].start = SLOT_ADDRESS(root, slot)
@@ -295,7 +295,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root,
 	}
 
 	return 0;
-	
+
  failed:
 	while (--i >= 0)
 		release_resource(&edev->res[i]);
@@ -314,7 +314,7 @@ static void __init eisa_release_resources(struct eisa_device *edev)
 
 static int __init eisa_probe(struct eisa_root_device *root)
 {
-        int i, c;
+	int i, c;
 	struct eisa_device *edev;
 	char *enabled_str;
 
@@ -322,16 +322,16 @@ static int __init eisa_probe(struct eisa_root_device *root)
 
 	/* First try to get hold of slot 0. If there is no device
 	 * here, simply fail, unless root->force_probe is set. */
-	
+
 	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
 	if (!edev) {
 		dev_err(root->dev, "EISA: Couldn't allocate mainboard slot\n");
 		return -ENOMEM;
 	}
-		
+
 	if (eisa_request_resources(root, edev, 0)) {
 		dev_warn(root->dev,
-		         "EISA: Cannot allocate resource for mainboard\n");
+			 "EISA: Cannot allocate resource for mainboard\n");
 		kfree(edev);
 		if (!root->force_probe)
 			return -EBUSY;
@@ -350,14 +350,14 @@ static int __init eisa_probe(struct eisa_root_device *root)
 
 	if (eisa_register_device(edev)) {
 		dev_err(&edev->dev, "EISA: Failed to register %s\n",
-		        edev->id.sig);
+			edev->id.sig);
 		eisa_release_resources(edev);
 		kfree(edev);
 	}
-	
+
  force_probe:
-	
-        for (c = 0, i = 1; i <= root->slots; i++) {
+
+	for (c = 0, i = 1; i <= root->slots; i++) {
 		edev = kzalloc(sizeof(*edev), GFP_KERNEL);
 		if (!edev) {
 			dev_err(root->dev, "EISA: Out of memory for slot %d\n",
@@ -367,8 +367,8 @@ static int __init eisa_probe(struct eisa_root_device *root)
 
 		if (eisa_request_resources(root, edev, i)) {
 			dev_warn(root->dev,
-			         "Cannot allocate resource for EISA slot %d\n",
-			         i);
+				 "Cannot allocate resource for EISA slot %d\n",
+				 i);
 			kfree(edev);
 			continue;
 		}
@@ -395,11 +395,11 @@ static int __init eisa_probe(struct eisa_root_device *root)
 
 		if (eisa_register_device(edev)) {
 			dev_err(&edev->dev, "EISA: Failed to register %s\n",
-			        edev->id.sig);
+				edev->id.sig);
 			eisa_release_resources(edev);
 			kfree(edev);
 		}
-        }
+	}
 
 	dev_info(root->dev, "EISA: Detected %d card%s\n", c, c == 1 ? "" : "s");
 	return 0;
@@ -422,7 +422,7 @@ int __init eisa_root_register(struct eisa_root_device *root)
 	 * been already registered. This prevents the virtual root
 	 * device from registering after the real one has, for
 	 * example... */
-	
+
 	root->eisa_root_res.name  = eisa_root_res.name;
 	root->eisa_root_res.start = root->res->start;
 	root->eisa_root_res.end   = root->res->end;
@@ -431,7 +431,7 @@ int __init eisa_root_register(struct eisa_root_device *root)
 	err = request_resource(&eisa_root_res, &root->eisa_root_res);
 	if (err)
 		return err;
-	
+
 	root->bus_nr = eisa_bus_count++;
 
 	err = eisa_probe(root);
@@ -444,7 +444,7 @@ int __init eisa_root_register(struct eisa_root_device *root)
 static int __init eisa_init(void)
 {
 	int r;
-	
+
 	r = bus_register(&eisa_bus_type);
 	if (r)
 		return r;

drivers/eisa/pci_eisa.c

@@ -50,11 +50,11 @@ static int __init pci_eisa_init(struct pci_dev *pdev)
 		return -1;
 	}
 
-	pci_eisa_root.dev              = &pdev->dev;
-	pci_eisa_root.res	       = bus_res;
-	pci_eisa_root.bus_base_addr    = bus_res->start;
-	pci_eisa_root.slots	       = EISA_MAX_SLOTS;
-	pci_eisa_root.dma_mask         = pdev->dma_mask;
+	pci_eisa_root.dev		= &pdev->dev;
+	pci_eisa_root.res		= bus_res;
+	pci_eisa_root.bus_base_addr	= bus_res->start;
+	pci_eisa_root.slots		= EISA_MAX_SLOTS;
+	pci_eisa_root.dma_mask		= pdev->dma_mask;
 	dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
 
 	if (eisa_root_register (&pci_eisa_root)) {

drivers/eisa/virtual_root.c

@@ -35,11 +35,11 @@ static struct platform_device eisa_root_dev = {
 };
 
 static struct eisa_root_device eisa_bus_root = {
-	.dev           = &eisa_root_dev.dev,
-	.bus_base_addr = 0,
-	.res	       = &ioport_resource,
-	.slots	       = EISA_MAX_SLOTS,
-	.dma_mask      = 0xffffffff,
+	.dev		= &eisa_root_dev.dev,
+	.bus_base_addr	= 0,
+	.res		= &ioport_resource,
+	.slots		= EISA_MAX_SLOTS,
+	.dma_mask	= 0xffffffff,
 };
 
 static void virtual_eisa_release (struct device *dev)
@@ -50,13 +50,12 @@ static void virtual_eisa_release (struct device *dev)
 static int __init virtual_eisa_root_init (void)
 {
 	int r;
-	
-        if ((r = platform_device_register (&eisa_root_dev))) {
-                return r;
-        }
+
+	if ((r = platform_device_register (&eisa_root_dev)))
+		return r;
 
 	eisa_bus_root.force_probe = force_probe;
-	
+
 	dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
 
 	if (eisa_root_register (&eisa_bus_root)) {